Hacking RELEASE Kosmos patches (ES & FS)

[gaga24]

If games asking you to turn off flight mode:

Download latest Kosmos, latest sig patches 2.0.0.-9.0.0 (not joonies).
Download latest tinfoil 4.1.0 with fw9.0.0 support. Overwrite atmosphere files from Kosmos and start console using fuseprimary (do not use hekate and goldleaf 0.7.1+quark)

 

[vanlim]

Hey guys, after adding the patches I still get "Checking if the software can be played" message. Anyone else get that issue?

I got that problem, this is solved by installing older goldleaf instead of the newer version

 

[DuveltjeDG]

Using the latest patches and the latest goldleaf nog problem here with Atmosphere/Hekate/Kosmos and 9.00 firmware.

 

[NeoKaralis]

Latest sigpatches don't work properly, some game (zelda:link's awakening, bloodstained) won't install (missing sigpatches).
I'm on ams 0.9.4 with firmware 9.0.1 and using gold leaf 0.7.3 with patches downloaded from the link in the opening post. It's a bug?

 

[Audioboxer]

Latest sigpatches don't work properly, some game (zelda:link's awakening, bloodstained) won't install (missing sigpatches).
I'm on ams 0.9.4 with firmware 9.0.1 and using gold leaf 0.7.3 with patches downloaded from the link in the opening post. It's a bug?

Works fine for me and I began on a 9.0.1 console.

Is Goldleaf saying firmware out of date? I had that issue until I updated it to the latest.

 

[resurrecta]

Mine works using Tinfoil rather than Goldleaf. But my homebrew app store still doesn't respond to buttons. Does anyone know if there's an updated version out?

 

[NeoKaralis]

Works fine for me and I began on a 9.0.1 console.

Is Goldleaf saying firmware out of date? I had that issue until I updated it to the latest.

It says "Invalid NCA (might mean missing sigpatches or a too low firmware)"

 

[Toyosup88]

So i'm just curious. What's the difference between the two zip files? One has bootconfig and one doesn't.

 

[elninono]

is it just me or tinfoil 0.2.1 doesnt work i try installing this patch but it seem i cant even move the options in tinfoil

Did you solve your issue ? Otherwise welcome to our club ! I can't post link yet, but there is another thread about this issue (Tinfoil suddenly won't install). I am on atm 0.9.4 with emummc on 9.0.1 and tinfoil is freezing 0.2.1 at launch, and goldleaf is freezing when I try to explore my computer (using fluffy in goldleaf mode)

 

[seasway]

Did you solve your issue ? Otherwise welcome to our club ! I can't post link yet, but there is another thread about this issue (Tinfoil suddenly won't install). I am on atm 0.9.4 with emummc on 9.0.1 and tinfoil is freezing 0.2.1 at launch, and goldleaf is freezing when I try to explore my computer (using fluffy in goldleaf mode)

After upgrading to FW 9.01 and Atmosphere 0.9.4 I also had this problem of tinfoil 0.2.1 freezing and solved it after trying many things. I finally ended up using ns-usbloader by developersu and tinfoil-usb-fix2 by satelliteseeker. I'm a new account so I don't think i can post links but you can look those tools up on github. Use ns-usbloader (instead of python) on your PC and use that tinfoil version on your Switch. I actually got Goldleaf working too after fiddling with many things but the problem with Goldleaf was that I could only install nsp's at 17MB/s and could only install one nsp at a time. With tinfoil I could install nsp's at 35MB/s and multiple nsp's at time.

 

[elninono]

After upgrading to FW 9.01 and Atmosphere 0.9.4 I also had this problem of tinfoil 0.2.1 freezing and solved it after trying many things. I finally ended up using ns-usbloader by developersu and tinfoil-usb-fix2 by satelliteseeker. I'm a new account so I don't think i can post links but you can look those tools up on github. Use ns-usbloader (instead of python) on your PC and use that tinfoil version on your Switch. I actually got Goldleaf working too after fiddling with many things but the problem with Goldleaf was that I could only install nsp's at 17MB/s and could only install one nsp at a time. With tinfoil I could install nsp's at 35MB/s and multiple nsp's at time.

Thanks for your answer, with tinfoil-usb-fix2 and ns-usbloader it worked like a charm !

 

[koenergy]

Hi for background, I homebrewed my switch using this guide. Basically, I'm running Atmosphere in EMUNAND using Hekate. I downloaded the sigpatches here, specifically Kosmos_patches_12_08_2019.zip However, I still can't install NSPs Tried also the sigpatches in this thread and it doesn't work also. Is there something I've been doing wrong?

 

[blindseer]

Use Kosmos_patches_12_08_2019_bootconfig.zip instead from github, I had the same problem trying to install anything till I used it.

 

[AlexanderBlackk]

Use Kosmos_patches_12_08_2019_bootconfig.zip instead from github, I had the same problem trying to install anything till I used it.

Thank you. You just saved a life.

 

[byanime]

When I want hekate to load Fusee Primary first then chain load Fusee Secondary,
how do I write the hekate_ipl.ini configuration?

Is this enough to enable the ES FS ACID nocmac patches?

{------ Atmosphere ------}
[CFW EmuMMC]
payload=bootloader/payloads/fusee-primary.bin
{}

Or I have to add
kip1patch=nosigchk
atmosphere=1
to this section or somewhere else?

 

[Naxster]

So i'm just curious. What's the difference between the two zip files? One has bootconfig and one doesn't.

I would also like to know this... Anyone please answer this

 

[blindseer]

The one with bootconfig works and the other doesn’t

 

[afeufeufeu]

Use Kosmos_patches_12_08_2019_bootconfig.zip instead from github, I had the same problem trying to install anything till I used it.

Thank you so much my good Sir <3

 

[Mihnea]

Hi for background, I homebrewed my switch using this guide. Basically, I'm running Atmosphere in EMUNAND using Hekate. I downloaded the sigpatches here, specifically Kosmos_patches_12_08_2019.zip However, I still can't install NSPs Tried also the sigpatches in this thread and it doesn't work also. Is there something I've been doing wrong?

Hi, I'm in a similar situation to yours, I used that same guide and some games (Zelda:BOTW, Fire Emblem among others) won't work. I'm on Hekat 5.1.1, atmosphere 0.10.1, HOS 9.1.0, Goldleaf 0.7.3, Tinfoil 7.0. NSP installing with Goldleaf straight up fails ("Invalid NCA (might mean missing sigpatches or a too low firmware) (4518)". Tinfoils installs the .xci files, but the data is corrupted. Not sure if it matters, but I'm running CFW on emuNAND because Hekate throws up an error if I try to launch CFW on emumc (that's a whole other issue). Here's what I did:

1. I dumped the fuse info and TSEC keys from Hekate (not sure if necessary, but I found it mentioned in a guide somewhere).
2. I dumped all keys using Lockpick-RCM (I left them in their original location: /switch/.prod.keys...I'm assuming I don't have to move them somewhere else...)
3. I used the files in the post below yours (not entirely sure if I should use Kosmos patches or atmosphere, but Kosmos worked for you so I used those).
4. I had to change the hekane_ipl.ini file provided with the Kosmos patches, because the kip1patch=nosigchk argument no longer works with Hekate.

Any ideas? Are the keys in the post just after yours already outdated?

 

[Draxzelex]

Hi, I'm in a similar situation to yours, I used that same guide and some games (Zelda:BOTW, Fire Emblem among others) won't work. I'm on Hekat 5.1.1, atmosphere 0.10.1, HOS 9.1.0, Goldleaf 0.7.3, Tinfoil 7.0. NSP installing with Goldleaf straight up fails ("Invalid NCA (might mean missing sigpatches or a too low firmware) (4518)". Tinfoils installs the .xci files, but the data is corrupted. Not sure if it matters, but I'm running CFW on emuNAND because Hekate throws up an error if I try to launch CFW on emumc (that's a whole other issue). Here's what I did:

1. I dumped the fuse info and TSEC keys from Hekate (not sure if necessary, but I found it mentioned in a guide somewhere).
2. I dumped all keys using Lockpick-RCM (I left them in their original location: /switch/.prod.keys...I'm assuming I don't have to move them somewhere else...)
3. I used the files in the post below yours (not entirely sure if I should use Kosmos patches or atmosphere, but Kosmos worked for you so I used those).
4. I had to change the hekane_ipl.ini file provided with the Kosmos patches, because the kip1patch=nosigchk argument no longer works with Hekate.

Any ideas? Are the keys in the post just after yours already outdated?

First off, emuMMC is "emuNAND" so its the same thing. Secondly, Nintendo Switch keys have no bearing on installing anything. Those keys are primarily meant for tasks on a computer such as Hactool. Thirdly, try using Awoo-Installer.