Hacking [No longer maintained] RajNX - starter pack for Nintendo Switch

[teknokidd]

Something similar happened to me when i updated from 5.0.1 to 6.0.0 using choi..got error when i went to launch..i just reinstalled a fresh copy of Rajnx 0751.

 

[Azel]

have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.

OFW boots fine.

I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?

can anyone help ? thanks

 

[Dfroberts86]

have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.

OFW boots fine.

I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?

can anyone help ? thanks

You need to delete and replace the files in your SD card, and also make sure you are sending the new payload, not the old one. It will work after doing this.

Sent from my BND-L24 using Tapatalk

 

[Azel]

have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.

OFW boots fine.

I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?

can anyone help ? thanks

doing that already
using the newest ipl too

 

[Azel]

Raj released a lot of VERY useful tools for the switch, I'd still be stuck on 3.0.1 with no exfat ans SX OS if it weren't for him. Rei used atmo sources to load SX OS cracked (not by him) nsp installer function, wow, I'm in "awe".

 

[Azel]

have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.

OFW boots fine.

I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?

can anyone help ? thanks

reflashed my nand backup (for nothing) and still had the "same" issue with cfw (stuck at the switch logo this time, no errors) (stock booting fine)

tried another sd card lying around, and it worked fine this time, so yeah, don't forget to backup your saves every once in a while, and format/change your sd card if you have such an issue.

 

[xHR]

Tried RajNX with 6.1.0:

"Could not start the software.
Please try again from the HOME menu"

ReiNX works without issues

 

[Skonikol]

Tried RajNX with 6.1.0:

"Could not start the software.
Please try again from the HOME menu"

ReiNX works without issues

@rajkosto Confirm

 

[Arnold101]

i have no problem with rajnx and latest firmware but i like a more often updated app.

 

[rajkosto]

the lull is a chance for everyone to swap to official atmosphere to give it its deserved place in the spotlight, make use of it (bigger things are in the works for this, dont want to release tiny updates being in lockstep with atmosphere all the time)

 

[Skonikol]

the lull is a chance for everyone to swap to official atmosphere to give it its deserved place in the spotlight, make use of it (bigger things are in the works for this, dont want to release tiny updates being in lockstep with atmosphere all the time)

If there were available (friendly) documentation for the atmosphere, I would agree with you. Currently RajNX indispensable for many users.

 

[The3rdknuckles]

I have some installed NSPs on my NAND. Is there something out there that can boot the games directly from the main menu without that download game update BS?

 

[jakibaki]

If there were available (friendly) documentation for the atmosphere, I would agree with you. Currently RajNX indispensable for many users.

Shameless promotion: https://guide.sdsetup.com

The sdfiles are basically (almost) vanilla atmosphere+fancy goodies.

 

[Skonikol]

Shameless promotion: https://guide.sdsetup.com

The sdfiles are basically (almost) vanilla atmosphere+fancy goodies.

I'm sorry, that's not exactly what I meant.

 

[beeno92]

@rajkosto help me, I've used the R4S and downloaded current.uf2 (rajnx) and flash to R4S but it 0.7.4. I've updated firmware to 6.1.0 and use rajnx 0.7.5.1a. (the website R4S not link download for rajnx, and not assist good for all cfw sx os, hekate, rejnx, atmosphere... in 6.1.0, the link download is 25.9.2018. Would you could make a current.uf2 0.7.5.1a for R4S. R4S possible not compatible with rajnx, when I put it in it led red and blue and not boot to payload rajnx (It already RCM), but when I plugin PC with usb type C, tergarcmgui say rcm, but I don't send payload, un plug from pc and plug R4S in Nintendo SW, then It can boot in payload but not boot to cfw because it not compatible with 6.1.0, when I use RCM loader (same R4S or SX Gear) RCM loader boot normal. Can you help me R4S not boot to payload (It can boot if I plug NX in pc with usb type C and not send payload, then unplug and plug R4S, then it boot to payload), I dont understand

the 0.7.4 rajnx can not use with firm 6.x.x, could you make the current.uf2 file for R4S for everybody use rajnx with R4S? thanks you very much

 

[beeno92]

@rajkosto Confirm

I've updated to 6.1.0 a few day, it can boot very good and play game for NX, homebrew all compatible with new version rajnx 0.7.5.1a

 

[tataniko]

I really like RajNX & ChoiDujourNX, simple the best & user friendly solution. I tested both on 1.0, 2.3, 3.02 & 5.1 firmwares & worked great. Thank you very much, great job.

 

[trong2911]

I really like RajNX simple the best & user friendly solution. I tested both on 6.1 firmwares & worked great. Thank you very much.
But i have a question about overclock Switch?
Could you add a new feature to increase CPU or GPU for better experience of Handheld mode?Sr for my bad english

 

[tataniko]

I was able to use title manager (tinfoil) from RajNXv069.zip file on 2.3, 3.02 & 5.1 firmwares but this tinfoil is not working on 1.0.

Also, I tried goldleaf-a14ea6a on 1.0 but it stopped working with an error.

Anybody has experience about working title manager on firmware 1.0? Thank you.

 

[charlieb]

I was able to use title manager (tinfoil) from RajNXv069.zip file on 2.3, 3.02 & 5.1 firmwares but this tinfoil is not working on 1.0.

Also, I tried goldleaf-a14ea6a on 1.0 but it stopped working with an error.

Anybody has experience about working title manager on firmware 1.0? Thank you.

you can't use nap installers on 1.0.0 as it lacks the services required to support the install. the minimum fw that allows nsp installs is 2.0.0 iirc