Hacking Nintendo switch stuck at logo

[Canna]

After trying to add exFAT support to my switch from this youtube:
My switch is stucked at nintendo switch logo. I failed to finish the process with HacDisk tool. Any help pls?

what do you mean you failed to finish with hacdiskmount thats your problem right there,, thats direct access to the nand,,

with hackdiskmount you need to backup your prodinfo and prodinfo F

first
follow this guide to backup what you have.. > CLICK
Skip the part that mentions to run cfw and kezplez as you cant boot the console anyway..
Once you have the rawnand.bin and boot 0 boot 1 save them to your pc...

Secondly
Connect you switch to your pc with hackdiskmount by using the memloader payload and selecting emmc.ini on your switch then Run hackdiskmount as administartor and the goto file and select pyhsical drive and select the the linux ums drive then ....
you need to open prodinfo enter your biskeys test and save and click on dump to file
and do the same for prodinfoF enter your biskeys and click on dump to file
MAKE SURE NOT TO OVERWRITE THE OTHER OR RENAME THEM

Spoiler: Examples

then you need to rebuild your nand.. by following this guide > Click
Skip parts 1-4 as this you should of done by now if you are following what i have said above... And start from step 5
Make sure you acquire 6.0 system files and not anything else you can find these on Auto xbins they are called
NX-6.0.0.zip
When you get to Step 8,, SKIP PARTS 8 TO 8.3 And Carry on from 8.4
As i dont want you to replace your boot 0/1 as there good...

And ship step 9 and just boot normally
Once you followed the guide correctly you should boot normally,

Sorry its a bit complicated but i layed out the steps you should and should not do...

I know there is a easier way to do this,but im not as informed about it,,
You should speak to @rajkosto before you follow my tips and ask him how to replace
BCPKG2-1-Normal-Main.bin
with hacdiskmount as i think this is were the exfat stuff is kept

You did not finish the video guide correctly with hackdiskmount so thats why i asked you to rebuild the nand.
Before you do anything speak to @rajkosto he has more experience then i

 

[HungNswitch]

Thank you for taking time to helping me. Much appreciated.

I will give you an update when I am done.

--------------------- MERGED ---------------------------

what do you mean you failed to finish with hacdiskmount thats your problem right there,, thats direct access to the nand,,

with hackdiskmount you need to backup your prodinfo and prodinfo F

first
follow this guide to backup what you have.. > CLICK
Skip the part that mentions to run cfw and kezplez as you cant boot the console anyway..
Once you have the rawnand.bin and boot 0 boot 1 save them to your pc...

Secondly
Connect you switch to your pc with hackdiskmount by using the memloader payload and selecting emmc.ini on your switch then Run hackdiskmount as administartor and the goto file and select pyhsical drive and select the the linux ums drive then ....
you need to open prodinfo enter your biskeys and click on dump to file
and do the same for prodinfoF enter your biskeys and click on dump to file
MAKE SURE NOT TO OVERWRITE THE OTHER OR RENAME THEM

Spoiler: Examples

View attachment 144808 View attachment 144809

then you need to rebuild your nand.. by following this guide > Click
Skip parts 1-4 as this you should of done by now if you are following what i have said above... And start from step 5
Make sure you acquire 6.0 system files and not anything else you can find these on Auto xbins they are called
NX-6.0.0.zip
When you get to Step 8,, SKIP PARTS 8 TO 8.3 And Carry on from 8.4
As i dont want you to replace your boot 0/1 as there good...

And ship step 9 and just boot normally
Once you followed the guide correctly you should boot normally,

Sorry its a bit complicated but i layed out the steps you should and should not do...

I know there is a easier way to do this,but im not as informed about it,,
You should speak to @rajkosto before you follow my tips and ask him how to replace
BCPKG2-1-Normal-Main.bin
with hacdiskmount as i think this is were the exfat stuff is kept

You did not finish the video guide correctly with hackdiskmount so thats why i asked you to rebuild the nand.
Before you do anything speak to @rajkosto he has more experience then i

Thank you for taking time to helping me. Much appreciated.

I will give you an update when I am done.

 

[HungNswitch]

what do you mean you failed to finish with hacdiskmount thats your problem right there,, thats direct access to the nand,,

with hackdiskmount you need to backup your prodinfo and prodinfo F

first
follow this guide to backup what you have.. > CLICK
Skip the part that mentions to run cfw and kezplez as you cant boot the console anyway..
Once you have the rawnand.bin and boot 0 boot 1 save them to your pc...

Secondly
Connect you switch to your pc with hackdiskmount by using the memloader payload and selecting emmc.ini on your switch then Run hackdiskmount as administartor and the goto file and select pyhsical drive and select the the linux ums drive then ....
you need to open prodinfo enter your biskeys test and save and click on dump to file
and do the same for prodinfoF enter your biskeys and click on dump to file
MAKE SURE NOT TO OVERWRITE THE OTHER OR RENAME THEM

Spoiler: Examples

View attachment 144808 View attachment 144809

then you need to rebuild your nand.. by following this guide > Click
Skip parts 1-4 as this you should of done by now if you are following what i have said above... And start from step 5
Make sure you acquire 6.0 system files and not anything else you can find these on Auto xbins they are called
NX-6.0.0.zip
When you get to Step 8,, SKIP PARTS 8 TO 8.3 And Carry on from 8.4
As i dont want you to replace your boot 0/1 as there good...

And ship step 9 and just boot normally
Once you followed the guide correctly you should boot normally,

Sorry its a bit complicated but i layed out the steps you should and should not do...

I know there is a easier way to do this,but im not as informed about it,,
You should speak to @rajkosto before you follow my tips and ask him how to replace
BCPKG2-1-Normal-Main.bin
with hacdiskmount as i think this is were the exfat stuff is kept

You did not finish the video guide correctly with hackdiskmount so thats why i asked you to rebuild the nand.
Before you do anything speak to @rajkosto he has more experience then i

I have four crypt biskeys and four tweak biskeys. Should I only enter one of them?

 

[Canna]

I have four crypt biskeys and four tweak biskeys. Should I only enter one of them?

dude it tells you on hackdisck mount...

Biskeys 0

crypto and encrypt

 

[HungNswitch]

My bad

 

[Canna]

 

[HungNswitch]

dude it tells you on hackdisck mount...

Biskeys 0

crypto and encrypt

EDIT: Nvm, thank you for your help. I will figure it out.

 

[NoNAND]

If you were already on 6.0.0 why not just get the update from the system settings dammit

 

[HungNswitch]

If you were already on 6.0.0 why not just get the update from the system settings dammit

Because I am stupid... Thought it was dangerous to update the system.

--------------------- MERGED ---------------------------

This is so messed up. I cant proceed from step 6 as I get an error: "Could not find keyblob_key_source_xx! Please check the integrity of the data used in the current stage!" when I try to extract the keys.txt.. fml..

--------------------- MERGED ---------------------------

Are there no solution to this? Or should I just send it in to nintendo repair service?

--------------------- MERGED ---------------------------

I will reward 50 dollars in crypto to the person who can solve this to me

 

[bundat]

I will reward 50 dollars in crypto to the person who can solve this to me

I think @Canna is willing to directly assist users via TeamViewer for a fee. You can try messaging him directly.

He's the only one who amazingly always has the patience to walk through the process every time someone posts here that they bricked.

 

[HungNswitch]

I think @Canna is willing to directly assist users via TeamViewer for a fee. You can try messaging him directly.

He's the only one who amazingly always has the patience to walk through the process every time someone posts here that they bricked.

Thank you

 

[HungNswitch]

Updat

Thank you for taking time to helping me. Much appreciated.

I will give you an update when I am done.

--------------------- MERGED ---------------------------


Thank you for taking time to helping me. Much appreciated.

I will give you an update when I am done.

UPDATE: Turns out that I messed the switch up. Big thanks to @Canna for helping me figure it out!

 

[dsrules]

Updat


UPDATE: Turns out that I messed the switch up. Big thanks to @Canna for helping me figure it out!

that means, Canna already helped you fixed it?

 

[Canna]

that means, Canna already helped you fixed it?

he formatted the console by mistake when mounting the switch and it wiped the partitions and the prodinfo... been sent for repair

 

[comput3rus3r]

If you updated to 6.0 why didn't you just get exfat support officially?

--------------------- MERGED ---------------------------

he formatted the console by mistake when mounting the switch and it wiped the partitions and the prodinfo... been sent for repair

You think Nintendo is going to repair it knowing the only way he messed it up was using unauthorized software?

 

[alkar]

how can you even format a prodinfo since you cannot even mount it (this one is CAL0, not FAT) ?

 

[Canna]

how can you even format a prodinfo since you cannot even mount it (this one is CAL0, not FAT) ?

prodinfo is corrupted.

If you updated to 6.0 why didn't you just get exfat support officially?

--------------------- MERGED ---------------------------


You think Nintendo is going to repair it knowing the only way he messed it up was using unauthorized software?

Yes there repair it.. no trace of hackdiskmount or hekate.

 

[Adran_Marit]

@Canna thanks again for helping with these errors. Should see if we can get that guide taken down :s