Hacking Hekate + LayeredFS + Full Sig Patches

[loler55]

Update to 5.1.0 or use an alternative method for your firmware.

what IS THE ALTERNATIVE?

 

[VashTS]

looks like OP is deleted, where can we grab this CFW?

 

[loler55]

anyone have a idea why no hombrewlauncher.nro is in the package and how i cann install it???

 

[slaphappygamer]

what IS THE ALTERNATIVE?

Must be the update without burning fuses. Here

 

[loler55]

sooo 3.01 when i use chrisger sd card files i get a blackscreen when i launch cfw+sigpatch
but ftp+cfw+nosigpatch runs
its that the same without ftp??
how i can get the hombrewlauncher???
in the normal hekate sdfile package its included
normal hekate runs but has so sigpatch

 

[slaphappygamer]

anyone have a idea why no hombrewlauncher.nro is in the package and how i cann install it???

Get it here. Just put the nro in the root of your sd card. Homebrew launcher is outdated. This is hbmenu.

 

[loler55]

Get it here. Just put the nro in the root of your sd card. Homebrew launcher is outdated. This is hbmenu.

when i click on album only pictures are there no homebrewlauncher whyyy???????
i have the nro in root

but with tomger sd files from op it dosnt load
only load with orginal hekate files....

plz help @tomGER

 

[slaphappygamer]

when i click on album only pictures are there no homebrewlauncher whyyy???????
i have the nro in root

but with tomger sd files from op it dosnt load
only load with orginal hekate files....

plz help

right, the link in the OP only has the original hekate payload. im not sure whyelse your homebrewlauncher wont run as i havent tried the altered version of hekate. problem MAY be in your hekate_ipl.ini file. can you post it here?

 

[loler55]

[config]
autoboot=0
bootwait=0
customlogo=0
verification=2

{-- Custom Firmwares --}
[CFW]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
[CFW for Firmware 1.0]
kip1=modules/oldfirm/loader.kip1
kip1=modules/oldfirm/sm.kip1
[CFW + Clear Log]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/nx-dreport.kip
[CFW + Sig Patches]
kip1=modules/oldlayered/loader.kip
kip1=modules/oldlayered/sm.kip
kip1=modules/oldlayered/fs_mitm.kip
kip1=modules/FS510-exfat_nocmac_nosigchk.kip1
atmosphere=1
{ }

{----- LayeredFS ------}
[LayeredFS]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/newfirm/fs_mitm.kip
atmosphere=1
kip1patch=nosigchk
[Older LayeredFS]
kip1=modules/oldlayered/loader.kip
kip1=modules/oldlayered/sm.kip
kip1=modules/oldlayered/fs_mitm.kip
atmosphere=1
kip1patch=nosigchk
[LayeredFS + Clear Log]
kip1=modules/nx-dreport.kip
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/newfirm/fs_mitm.kip
atmosphere=1
kip1patch=nosigchk
{ }

{-------- Stock -------}
[Stock]
[Stock + Clear Log]
kip1=modules/nx-dreport.kip
{ }

{----- FTP-Server -----}
{Port: 5000}
{ }
{Dont use SDFilesUpdater with this!}
{It will corrupt your SD!}
{ }
[FTP + CFW]
kip1=modules/sys-ftpd.kip
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
[FTP + CFW + No Sig Chk]
kip1=modules/sys-ftpd.kip
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/newfirm/fs_mitm.kip
atmosphere=1
kip1patch=nosigchk
{ }

{----- Atmosphere -----}
{ }
{This is just for testing!}
{Its your fault if it bricks!}
{I am not responsible for anything!}
{Neither is the Reswitched Team!}
{ }
[Atmosphere]
secmon=modules/atmosphere/exosphere.bin
kip1=modules/atmosphere/loader.kip
kip1=modules/atmosphere/sm.kip
kip1=modules/atmosphere/fs_mitm.kip
logopath=modules/atmosphere/atmosphere.bmp
atmosphere=1
{ }
{ }
{ }
{ }
{ }
{ }
{----------------------}
{ }
{Running v5.2.1 of tumGER/SDFilesSwitch}
{By: tomGER(@tumGER)}
{StevenMattera, WerWolv}
{ }
{------ Thanks to -----}
{ }
{Reswitched Team, CTCaer}
{Thog, vgmoose, Brawl345}
{GGLinnk, jpe230, Adubbz}
{thomasnet, TheDgtl}
{jakibaki, rajkosto}
{ }
{----------------------}





and here the orginal that work
[stock]
[CFW]
kip1=loader.kip1
kip1=sm.kip1




problem 1:hombrewlauncher dosnt work
problem 2:cfw+sigpatch give me a blackscreen (only with ftw work)

--------------------- MERGED ---------------------------

ok now ive edited te config

[FTP + CFW + No Sig Chk]
(kip1=modules/sys-ftpd.kip ) ive deleted this and now i can boot 0n 3.01 witf sigpatch but withouth ftp
now i need a way to launch tinfoil
i cannt geht hombrewmenu to work

--------------------- MERGED ---------------------------

ok change the athomsphere folder from tomger sd files with the orginal from hekate and hombrewlauncher is there

--------------------- MERGED ---------------------------

soo now another error from tinfoil

--------------------- MERGED ---------------------------

it feels like no sig patch its not running good on 3.01.... plz welp

 

[Migz]

[config]
autoboot=0
bootwait=0
customlogo=0
verification=2

{-- Custom Firmwares --}
[CFW]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
[CFW for Firmware 1.0]
kip1=modules/oldfirm/loader.kip1
kip1=modules/oldfirm/sm.kip1
[CFW + Clear Log]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/nx-dreport.kip
[CFW + Sig Patches]
kip1=modules/oldlayered/loader.kip
kip1=modules/oldlayered/sm.kip
kip1=modules/oldlayered/fs_mitm.kip
kip1=modules/FS510-exfat_nocmac_nosigchk.kip1
atmosphere=1
{ }

{----- LayeredFS ------}
[LayeredFS]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/newfirm/fs_mitm.kip
atmosphere=1
kip1patch=nosigchk
[Older LayeredFS]
kip1=modules/oldlayered/loader.kip
kip1=modules/oldlayered/sm.kip
kip1=modules/oldlayered/fs_mitm.kip
atmosphere=1
kip1patch=nosigchk
[LayeredFS + Clear Log]
kip1=modules/nx-dreport.kip
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/newfirm/fs_mitm.kip
atmosphere=1
kip1patch=nosigchk
{ }

{-------- Stock -------}
[Stock]
[Stock + Clear Log]
kip1=modules/nx-dreport.kip
{ }

{----- FTP-Server -----}
{Port: 5000}
{ }
{Dont use SDFilesUpdater with this!}
{It will corrupt your SD!}
{ }
[FTP + CFW]
kip1=modules/sys-ftpd.kip
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
[FTP + CFW + No Sig Chk]
kip1=modules/sys-ftpd.kip
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/newfirm/fs_mitm.kip
atmosphere=1
kip1patch=nosigchk
{ }

{----- Atmosphere -----}
{ }
{This is just for testing!}
{Its your fault if it bricks!}
{I am not responsible for anything!}
{Neither is the Reswitched Team!}
{ }
[Atmosphere]
secmon=modules/atmosphere/exosphere.bin
kip1=modules/atmosphere/loader.kip
kip1=modules/atmosphere/sm.kip
kip1=modules/atmosphere/fs_mitm.kip
logopath=modules/atmosphere/atmosphere.bmp
atmosphere=1
{ }
{ }
{ }
{ }
{ }
{ }
{----------------------}
{ }
{Running v5.2.1 of tumGER/SDFilesSwitch}
{By: tomGER(@tumGER)}
{StevenMattera, WerWolv}
{ }
{------ Thanks to -----}
{ }
{Reswitched Team, CTCaer}
{Thog, vgmoose, Brawl345}
{GGLinnk, jpe230, Adubbz}
{thomasnet, TheDgtl}
{jakibaki, rajkosto}
{ }
{----------------------}





and here the orginal that work
[stock]
[CFW]
kip1=loader.kip1
kip1=sm.kip1




problem 1:hombrewlauncher dosnt work
problem 2:cfw+sigpatch give me a blackscreen (only with ftw work)

--------------------- MERGED ---------------------------

ok now ive edited te config

[FTP + CFW + No Sig Chk]
(kip1=modules/sys-ftpd.kip ) ive deleted this and now i can boot 0n 3.01 witf sigpatch but withouth ftp
now i need a way to launch tinfoil
i cannt geht hombrewmenu to work

--------------------- MERGED ---------------------------

ok change the athomsphere folder from tomger sd files with the orginal from hekate and hombrewlauncher is there

--------------------- MERGED ---------------------------

soo now another error from tinfoil

--------------------- MERGED ---------------------------

it feels like no sig patch its not running good on 3.01.... plz welp

Yes mate no sigpatches work for lower firmwares >4.1.0 at the moment but the powers that be! Are working om it!

 

[loler55]

ok i loose enough time with this
can confirm it dosnt work on 3.01
hope we get a solution soon
best way is emunand.....

what means ftp +cfw + sig check ----------- this worked on 3.01

--------------------- MERGED ---------------------------

 

[BaamAlex]

anyone have a idea why no hombrewlauncher.nro is in the package and how i cann install it???

You cant install it. You must launch it after sending the payload and after loading the cfw via the album.

 

[loler55]

You cant install it. You must launch it after sending the payload and after loading the cfw via the album.

No idea what You mean i Launch it via Album and its on my sd

 

[BaamAlex]

On the root of your sd card? i had the same problem today. the payload was sent to the console but no hbmenu in the album.

 

[loler55]

On the root of your sd card? i had the same problem today. the payload was sent to the console but no hbmenu in the album.

You Need to read my post

ok change the athomsphere folder from tomger sd files with the orginal from hekate and hombrewlauncher is there

 

[BaamAlex]

From this thread here. If i used the files from this thread here i had a hbmenu in the album.

 

[loler55]

No way on 3.01 ...

 

[loler55]

anyone here with 3.01 and have it running without blackscreen=??

 

[issayloki]

Does any one know why new hakate 3.2 payload not give me any option to choose?. After I get into rcm and load hakate 3.2 from my NX Android it just show new logo hakate then load stright into CFW. They use to have lot of option like normal cfw layeredfs etc. Do I have to edit hekate.ini?

 

[Ashura66]

Does any one know why new hakate 3.2 payload not give me any option to choose?. After I get into rcm and load hakate 3.2 from my NX Android it just show new logo hakate then load stright into CFW. They use to have lot of option like normal cfw layeredfs etc. Do I have to edit hekate.ini?

Check the .ini. Seems to me like it has autoboot set to one. If so set it to zero