Hacking Post your WiiU cheat codes here!

[skoolzout1]

@RandomUser Do you still have the BotW Memory dump for 1.1.0? if so, may i have it?

 

[BeRnYGP]

And why is that so hard? There is a reason I made the Gecko U Updater tool so people don't even have to create folders/move files themselves since it seems kinda hard for some. However, nobody uses it so please link that tool in future.

When it isn't found, it will say the whole path so you can easily tell that you didn't put it there:

sd:/wiiu/apps/TCPGecko/codehandler.bin not found

I wish we knew how to do this relative to the ELF so the folder can be named anyhow. Even better, merging the code handler into the ELF so nobody can fail anymore.

I use the "Gecko U Updater", its more easy than searching always the new "codehandler.bin" or the updates of TCPGecko. By the way, can I still use it? It seems you have updated the TCPGecko.elf

 

[RedRose30]

yea, it should :/

I tried them again and they both still don't work for me.

When the game updates, and you have to update your codes, can the regions affect that?

 

[Casis]

I tried them again and they both still don't work for me.

When the game updates, and you have to update your codes, can the regions affect that?

I'm not particularly sure that regions can have anything to do with a code's compatibility, then again I can be wrong. But I'm 80/20 that the codes can work with any region.

 

[RandomUser]

@RandomUser Do you still have the BotW Memory dump for 1.1.0? if so, may i have it?

Yep. All dumped from 0x10000000 to 0x4C8A0000.
v1.1.0 Dump.
v1.1.1 Dump.

 

[skoolzout1]

Yep. All dumped from 0x10000000 to 0x4C8A0000.
v1.1.0 Dump.
v1.1.1 Dump.

Thank ya kindly.

 

[skoolzout1]

So ive updated some codes for BoTW version: 1.2.0

you can view them at the bottom of the post on my pastebin here:

https://pastebin.com/GhVJX4ZY

i ran out of time and wasnt able to update all of my codes, but ive updated all of the "essentials" as well as anything that used the same pointers to work.

also, @ItchyOwned Ill need the new button activator address for the pro controller. try searching for the button values between 10200000 - 10400000.

this area mostly never changes even between games (99% sure on that) so if you get an address from there we shouldnt ever have to worry about it again.




as a side note: I know this area never changes because i made a code to sort of "fix" my gamepad. the analog stick sort of sticks either forwards or backwards and i found the Left analog stick DeadZone value in this area.


Here's the code that should work on any game in case anyone else has this problem:

Universal Gamepad Left Analog Stick Vertical DeadZone Adjustment [skoolzout1]
00020000 102EF998
07500860 00000000

Raise and lower the value of 07500860 to try and find an appropriate deadzone to hopefully stop it from "sticking"
i wouldnt recommend raising it by more than like 50 at a time until you get close to a good value

 

[Smash Br0]

Didn't get any answers, so posting this again...

Two questions @CosmoCortney

1.) Does this not work with RedNAND? I got up to Step 4.2., but JGecko U can't detect my Wii U. I tried auto-detecting its IP address and adding it manually.

2.) Do I need to install your Codehandler on every boot, or just once?

Thanks for any assistance.

 

[CosmoCortney]

Didn't get any answers, so posting this again...

try entering the Wii U's IP manually. and the codehandler needs to be installed every time you reboot the system, change between NANDs or open system settings

 

[RandomUser]

Thank ya kindly.

No Problem, I had them on my computer.

@PandaOnSmack, another update for your trainer.
Updated code for the patch v1.2.0 of BOTW

Wolf Link Infinite Hearts [RandomUser]
30000000 10903D74
40000000 4C89FFFF
31000000 00000050
30100000 00000000
40000000 4C89FFFF
00120160 000000XX
D0000000 DEADCAFE
Replace XX with desired harts or use 0C if your wolf has only three hart containers

 

[BullyWiiPlaza]

I use the "Gecko U Updater", its more easy than searching always the new "codehandler.bin" or the updates of TCPGecko. By the way, can I still use it? It seems you have updated the TCPGecko.elf

All files have been updated. The code handler is now always installed and you don't have a choice because there is no reason not to since the codehandler.bin is no longer needed, it won't be downloaded anymore either.

 

[Smash Br0]

try entering the Wii U's IP manually. and the codehandler needs to be installed every time you reboot the system, change between NANDs or open system settings

I can't get past "Connecting...". Here's what I've done:

1.) Start Wii U
2.) Start Haxchi, this boots Wii U into RedNAND
3.) Start game
4.) On PC, load up JGecko U, input Wii U's IP address

From there, JGecko U either gets stuck at "Connecting...", freezes on the PC only, or freezes on the PC and also freezes the Wii U.

What am i doing wrong?

 

[KrazyBro]

I can't get past "Connecting...". Here's what I've done:

1.) Start Wii U
2.) Start Haxchi, this boots Wii U into RedNAND
3.) Start game
4.) On PC, load up JGecko U, input Wii U's IP address

From there, JGecko U either gets stuck at "Connecting...", freezes on the PC only, or freezes on the PC and also freezes the Wii U.

What am i doing wrong?

It's probably because you don't have up to date files in your SD card, if not then idk

 

[CosmoCortney]

I can't get past "Connecting...". Here's what I've done:

1.) Start Wii U
2.) Start Haxchi, this boots Wii U into RedNAND
3.) Start game
4.) On PC, load up JGecko U, input Wii U's IP address

From there, JGecko U either gets stuck at "Connecting...", freezes on the PC only, or freezes on the PC and also freezes the Wii U.

What am i doing wrong?

you need to run tcpgecko before launching the game

 

[.44 Magnum]

So ive updated some codes for BoTW version: 1.2.0

you can view them at the bottom of the post on my pastebin here:

https://pastebin.com/GhVJX4ZY

i ran out of time and wasnt able to update all of my codes, but ive updated all of the "essentials" as well as anything that used the same pointers to work.

also, @ItchyOwned Ill need the new button activator address for the pro controller. try searching for the button values between 10200000 - 10400000.

this area mostly never changes even between games (99% sure on that) so if you get an address from there we shouldnt ever have to worry about it again.




as a side note: I know this area never changes because i made a code to sort of "fix" my gamepad. the analog stick sort of sticks either forwards or backwards and i found the Left analog stick DeadZone value in this area.


Here's the code that should work on any game in case anyone else has this problem:

Universal Gamepad Left Analog Stick Vertical DeadZone Adjustment [skoolzout1]
00020000 102EF998
07500860 00000000

Raise and lower the value of 07500860 to try and find an appropriate deadzone to hopefully stop it from "sticking"
i wouldnt recommend raising it by more than like 50 at a time until you get close to a good value

Nice work!! Thank you for taking the time, it is very much appreciated!!

 

[Casis]

So ive updated some codes for BoTW version: 1.2.0

you can view them at the bottom of the post on my pastebin here:

https://pastebin.com/GhVJX4ZY

i ran out of time and wasnt able to update all of my codes, but ive updated all of the "essentials" as well as anything that used the same pointers to work.

also, @ItchyOwned Ill need the new button activator address for the pro controller. try searching for the button values between 10200000 - 10400000.

this area mostly never changes even between games (99% sure on that) so if you get an address from there we shouldnt ever have to worry about it again.




as a side note: I know this area never changes because i made a code to sort of "fix" my gamepad. the analog stick sort of sticks either forwards or backwards and i found the Left analog stick DeadZone value in this area.


Here's the code that should work on any game in case anyone else has this problem:

Universal Gamepad Left Analog Stick Vertical DeadZone Adjustment [skoolzout1]
00020000 102EF998
07500860 00000000

Raise and lower the value of 07500860 to try and find an appropriate deadzone to hopefully stop it from "sticking"
i wouldnt recommend raising it by more than like 50 at a time until you get close to a good value

Thanks for the codes, man! It is unfortunate that the one code I was waiting for (blood moon for days) has stopped working and isn't working anymore, at least not yet I hope. But this is still great, you and PandaonSmack should partner up because your codes would be an excellent addition to his trainer, if he doesn't have most or all of them!

 

[Smash Br0]

you need to run tcpgecko before launching the game

Oops, forgot to mention that I did do that.

1.) Start Wii U
2.) Start Haxchi, this boots Wii U into RedNAND
3.) Start HomeBrew Channel
4.) Install the codehandler, exit to Wii U Menu automatically
5.) Start game
6.) On PC, load up JGecko U, input Wii U's IP address

 

[skoolzout1]

Thanks for the codes, man! It is unfortunate that the one code I was waiting for (blood moon for days) has stopped working and isn't working anymore, at least not yet I hope. But this is still great, you and PandaonSmack should partner up because your codes would be an excellent addition to his trainer, if he doesn't have most or all of them!

I'll get the rest done by tonight most likely, but I won't be able to port any codes onto the pro controller until @ItchyOwned posts a new button activator address for the pro controller.
Also I'm pretty sure 99% of the codes in panda's trainer are mine at this point. Which is fine by me.

 

[Casis]

I'll get the rest done by tonight most likely, but I won't be able to port any codes onto the pro controller until @ItchyOwned posts a new button activator address for the pro controller.
Also I'm pretty sure 99% of the codes in panda's trainer are mine at this point. Which is fine by me.

Sounds great, looking forward to them but then again there are no promises which is fine by me. And yeah looking back at them I realized the codes are very similar to yours if not exact, but yeah just an idea.

 

[BeRnYGP]

All files have been updated. The code handler is now always installed and you don't have a choice because there is no reason not to since the codehandler.bin is no longer needed, it won't be downloaded anymore either.

Nice! Thank you very much