Gaming Pokemon Bank: Could not find saved data!

[Infidel]

Thanks for that. Hopefully it helps someone. There is another issue though, as PokéBank and the transporter simply don't work with GateWay EmuNAND seemingly at all. Believe me, I tried uninstalling it and reinstalling it from the eShop and the FreeShop as well, to no avail. It basically just doesn't work on GateWay. Probably not something we can fix. With this, DSiWare and GBA games I sort of wish I could upgrade to CFW without losing all my stuff. Oh well.

I don't know a lot about emunand since I don't use it but, don't some titles have to be installed to both sysnand and emunand to work on emunand?

 

[bluedart]

I don't know a lot about emunand since I don't use it but, don't some titles have to be installed to both sysnand and emunand to work on emunand?

That sounds correct. I used to have minish cap on both sys and emu nands and it ran, but once I formatted nand to unlink them it stopped working. However, the previous version of poke bank worked without being installed on sysnand, so this is still a surprise.

 

[DarkCrudus]

That sounds correct. I used to have minish cap on both sys and emu nands and it ran, but once I formatted nand to unlink them it stopped working. However, the previous version of poke bank worked without being installed on sysnand, so this is still a surprise.

I believe that was if the emunand and sysnand files where connected. I just tried installing it on luma sys and it works with my gf's physical cart, but still doesnt work on my gw emunand

 

[Predator4233]

That sounds correct. I used to have minish cap on both sys and emu nands and it ran, but once I formatted nand to unlink them it stopped working. However, the previous version of poke bank worked without being installed on sysnand, so this is still a surprise.

I got it working on emunand using gateway.
Very easy but it did took me a while of research and testing.
1. In emunand, just install NTR cfw. (Its a cia file, just install it using fbi or bluemanager etc)
2. Load the ntr cia and it should load ntr cfw
3. Then back to home and load game and use pokemon bank should work.

 

[bluedart]

I got it working on emunand using gateway.
Very easy but it did took me a while of research and testing.
1. In emunand, just install NTR cfw. (Its a cia file, just install it using fbi or bluemanager etc)
2. Load the ntr cia and it should load ntr cfw
3. Then back to home and load game and use pokemon bank should work.

This sounds too good to be true. Can someone confirm that this is safe and not a troll?

 

[BobDoleOwndU]

This sounds too good to be true. Can someone confirm that this is safe and not a troll?

It's definitely safe. NTR has been around forever. Also, multiple people have already stated that it works in this thread.

 

[bluedart]

It's definitely safe. NTR has been around forever. Also, multiple people have already stated that it works in this thread.

I cannot confirm this. Also I do not remember reading anything about people successfully running NTR within gateway emunand on this thread. Anyway, I cannot get it to run. It dumps a ton of junk and then just says "current firmware not supported." ntr.bin is on root of SD and I downloaded both ntr.bin and ntr.cia from the github using version 3.2 since the newer ones say only new3ds. Installed via FBI. I am on EmuNAND GW3D 11.2.0-35U.

 

[XenoStarJack]

It seems to work with me, my only problem is with omega ruby: Bank freezes when i click "save and exit" but with Y and Sun works fine. I have CFW N3DSXL 11.2 reinand and i runned NTR... what's the problem???

 

[Imacaredformy2ds]

It seems to work with me, my only problem is with omega ruby: Bank freezes when i click "save and exit" but with Y and Sun works fine. I have CFW N3DSXL 11.2 reinand and i runned NTR... what's the problem???

Same thing happened to me with AS
You probablly edited some IG flags
I recommend exporting all your .pk6s to a folder and then putting them into a new save game, THEN transfering
hope that helped

 

[XenoStarJack]

Sorry what?

 

[Imacaredformy2ds]

Sorry what?

Nevermind

 

[XenoStarJack]

Same thing happened to me with AS
You probablly edited some IG flags
I recommend exporting all your .pk6s to a folder and then putting them into a new save game, THEN transfering
hope that helped

Nevermind

No please explain yourself! I Hacked some pokemon in a bad way? Can i fix that whith pkhex without lose my save?

 

[DarkCrudus]

I got it working on emunand using gateway.
Very easy but it did took me a while of research and testing.
1. In emunand, just install NTR cfw. (Its a cia file, just install it using fbi or bluemanager etc)
2. Load the ntr cia and it should load ntr cfw
3. Then back to home and load game and use pokemon bank should work.

Have gw emunand, can confirm works. As stated just cia file is needed. install, launch, use bank

requires ntr launch every time, no other files needed with ntr, put the cia, install, boot. it will fail, but will let you use bank

 

[bluedart]

Have gw emunand, can confirm works. As stated just cia file is needed. install, launch, use bank

requires ntr launch every time, no other files needed with ntr, put the cia, install, boot. it will fail, but will let you use bank

All right, now you guys are making sense. I figured since it didn't succeed that was just it, but I tried poke bank afterward and there it is. Interesting. Thank you so much. Also, slight side note: why the crap does that work?

 

[Majickhat55]

All right, now you guys are making sense. I figured since it didn't succeed that was just it, but I tried poke bank afterward and there it is. Interesting. Thank you so much. Also, slight side note: why the crap does that work?

I swear everyone around here would rather work harder than smarter. All you guys had to do was go to eShop to repair your software, go into the game and resave, and then load PokeBank and it would have recognized the save. Also, the update was both a FULL new install AND an update, I suggest uninstalling it first altogether and then doing it. I had the exact same problem and everything I did worked just fine (even after save editing they don't always show up, I have to go in game and resave, then they do). But you know, do whatever works for you. PokeBank is weird.

 

[DarkCrudus]

I swear everyone around here would rather work harder than smarter. All you guys had to do was go to eShop to repair your software, go into the game and resave, and then load PokeBank and it would have recognized the save. Also, the update was both a FULL new install AND an update, I suggest uninstalling it first altogether and then doing it. I had the exact same problem and everything I did worked just fine (even after save editing they don't always show up, I have to go in game and resave, then they do). But you know, do whatever works for you. PokeBank is weird.

not sure if you have just normal cfw or a gateway emunand, but with the emunand i uninstalled and reinstalled multiple times to try to get it to work, never did. Im not sure about the repairing software thing

it works fine with luma. I installed it there. worked fine with a physical version i had lying around the house, but still didnt work with the gw emunand

 

[bluedart]

I swear everyone around here would rather work harder than smarter. All you guys had to do was go to eShop to repair your software, go into the game and resave, and then load PokeBank and it would have recognized the save. Also, the update was both a FULL new install AND an update, I suggest uninstalling it first altogether and then doing it. I had the exact same problem and everything I did worked just fine (even after save editing they don't always show up, I have to go in game and resave, then they do). But you know, do whatever works for you. PokeBank is weird.

Of course I tried that. In fact I specifically stated that, but that was before you jumped into the thread, so you had no way of knowing I suppose. DarkCrudus and I were talking about GateWay EmuNAND which doesn't always work quite right, but his solution worked for both of us.

 

[Majickhat55]

No need to be snarky dude. You're not the OP for one, and for two it's not just Gateway/Emunand users that were having the same problem. Just offering a solution that worked for me and a few others, sheesh.

 

[bluedart]

No need to be snarky dude. You're not the OP for one, and for two it's not just Gateway/Emunand users that were having the same problem. Just offering a solution that worked for me and a few others, sheesh.

I didn't intend to be "snarky." In fact, I purposely held back by giving you the benefit of the doubt instead of stating more direct facts. I'm very greatful that people here are generally helpful and even deigned to help me with my issues as well. You were assuming, rather rudely, and I was simply correcting you. Anyway, I believe the OP found their solution, as did the more niche sect of GateWay users. I'll not be responding to more off-topic posts here from now on.

So in regards to pokebank and the save detecting issue, is this working for everyone now?

 

[Dams_27]

So I've installed NTR, ran it and watched it fail and that still didn't work either. Also tried downloading the FreeShop version and that didn't work. I know nothing of modding so if anyone can point me towards what I'm actually running, that'd be great. I've been trying for days now