Hacking someone help me please black screen

[nechigawara]

Was it yakara? If so, I'm so,so,sooooo deeply sorry

Does this look like wrong OTP problem?

 

[Imacaredformy2ds]

Does this look like wrong OTP problem?

Edited, I'm an idiot kekekek

 

[nechigawara]

Edited, I'm an idiot kekekek

No, I just asking a question, since @Lilligant also has a similar problem.
And someone point out that may be wrong OTP is the cause.
Although this case it shouldn't since he can boot payload.

 

[HyperT]

No, I just asking a question, since @Lilligant also has a similar problem.
And someone point out that may be wrong OTP is the cause.
Although this case it shouldn't since he can boot payload.

Not 100% here on whether op can load payloads or not. 2nd post by OP indicates following 9.2 ctrnand but think we need confirmation that *_*9.bins load.

The description [solid blue led & black screen would == brick afaik] - I think it was me in the other thread I was trying to break actual bricks down to their simplist form.

I.e. N3DS = 2.1 sleepmode O3DS = wrong OTP.bin [N3DS/OTPless = nand corruption / / bad otp hash] and everything else being sdcard corruption / sudden crash in the second or two it takes a9lh to be added / flashing a badnand [while removing a9lh]

 

[nechigawara]

Not 100% here on whether op can load payloads or not. 2nd post by OP indicates following 9.2 ctrnand but think we need confirmation that *_*9.bins load.

The description [solid blue led & black screen would == brick afaik] - I think it was me in the other thread I was trying to break actual bricks down to their simplist form.

I.e. N3DS = 2.1 sleepmode O3DS = wrong OTP.bin [N3DS/OTPless = nand corruption / / bad otp hash] and everything else being sdcard corruption / sudden crash in the second or two it takes a9lh to be added / flashing a badnand [while removing a9lh]

If he confirm of following 9.2 ctrnand transfer, he should be able to boot payload.
Unless he was lying or confusing something. But he said he do A9LH before, so I don't think he was lying or confusing .

 

[amximo]

If he confirm of following 9.2 ctrnand transfer, he should be able to boot payload.
Unless he was lying or confusing something. But he said he do A9LH before, so I don't think he was lying or confusing .

Why would I be lying about this stuff! There is no light on the screen what so ever when I power it up. Just pitch black and the blue light at the bottom lit. Try all the method but no luck. The worst part is I didn't back up the nand. Thanks all

 

[SahierKHLover]

Why would I be lying about this stuff! There is no light on the screen what so ever when I power it up. Just pitch black and the blue light at the bottom lit. Try all the method but no luck. The worst part is I didn't back up the nand. Thanks all

drain the battery *shrugs

 

[nechigawara]

Why would I be lying about this stuff! There is no light on the screen what so ever when I power it up. Just pitch black and the blue light at the bottom lit. Try all the method but no luck. The worst part is I didn't back up the nand. Thanks all

Some people trying to cover their mistake and blame the other but not themselves.
But, I think you wouldn't do that. That's why I said a reason to covering you.

 

[HyperT]

Why would I be lying about this stuff! There is no light on the screen what so ever when I power it up. Just pitch black and the blue light at the bottom lit. Try all the method but no luck. The worst part is I didn't back up the nand. Thanks all

The part we're just checking is if you can boot into hourglass9 or not

 

[dAVID_]

Give me the link to the yt vid.
Perhaps we can find the problem.
If you used someones else's otp your 3ds is BRICKED!!11

 

[vt6446]

Try to turn your 3ds on with the SD inside and when pressing turn on button quickly take the SD card out and it should boot up. I had the same problem and for some reason this worked for me.

 

[amximo]

drain the battery *shrugs

Try that already try that, left it on the whole night. Nada

--------------------- MERGED ---------------------------

Try to turn your 3ds on with the SD inside and when pressing turn on button quickly take the SD card out and it should boot up. I had the same problem and for some reason this worked for me.

Thanks for the method but sadly it doesn't work either.

--------------------- MERGED ---------------------------

The part we're just checking is if you can boot into hourglass9 or not

No can't boot into hourglass9. Press the power by holding down start, but no sign at all not even the background light up. Just cold pitch black screen.

 

[nechigawara]

No can't boot into hourglass9. Press the power by holding down start, but no sign at all not even the background light up. Just cold pitch black screen.

Did you really finish 9.2.0 CTRNAND Transfer using Decrypt9?

 

[amximo]

Did you really finish 9.2.0 CTRNAND Transfer using Decrypt9?

YES, i did the ctrand i waited 3 steps i believe when the percentage was counting. and after that done i went into the system setting. it show the firmware was 2.1 then i installed the a9lh by pressing SELECT button. thats where it went black screen. when it ask me to press start to restart!

 

[nechigawara]

Try downloading Decrypt9WIP, rename it to arm9loaderhax_si.bin, place it on the root of SD card, then reboot.
PS. You claim to be a pro, but look like you still not understand the way of A9LH.

 

[amximo]

Try downloading Decrypt9WIP, rename it to arm9loaderhax_si.bin, place it on the root of SD card, then reboot.
PS. You claim to be a pro, but look like you still not understand the way of A9LH.

True! I though I was a proGuess I was wrong. Learn my lesson the hard way. Thanks yall