Hacking Post your WiiU cheat codes here!

[Randymmmmm]

jgecko

do you know how to use tcp gecko? im forced to use that one till i find out what im doing wrong with using jgecko(for some reason i cant find or apply cheats with jgecko)

--------------------- MERGED ---------------------------

do you know how to use tcp gecko? im forced to use that one till i find out what im doing wrong with using jgecko(for some reason i cant find or apply cheats with jgecko)

and the code i gave you is one i altered to use on tcp gecko cuz the codes are different looking

it was originally

00000000 15073C63
00000063 00000000

 

[danver]

ok and i only need how to use a little bit of tcpgecko

 

[Randymmmmm]

ok and i only need how to use a little bit of tcpgecko

its not too bad to figure out, so im assuming you already have it ready to go on your wiiu, under the search tab there is 2 empty spots to put addresses and values in on the right near the bottom of tcpgecko right below where is says 0 results on the right side is values and left side is addresses (this is differnt on jgecko its backwards on that and i also see an extra set of address and values on thoes codes) but thats fine its not too hard to see what you need from a jgecko address to use on tcp gecko

example

00000000 15073C63
00000063 00000000

what you want from this is
-----------------------------------------
00000000 15073C63
00000063 00000000
-------------------------------------------
15073C63
00000063

These parts of the code
-------------------------------------------
now switch sides for tcp gecko use

15073C63 00000063

now put it in those 2 empty boxes i mentioned in the beginning and poke

--------------------- MERGED ---------------------------

its not too bad to figure out, so im assuming you already have it ready to go on your wiiu, under the search tab there is 2 empty spots to put addresses and values in on the right near the bottom of tcpgecko right below where is says 0 results on the right side is values and left side is addresses (this is differnt on jgecko its backwards on that and i also see an extra set of address and values on thoes codes) but thats fine its not too hard to see what you need from a jgecko address to use on tcp gecko

example

00000000 15073C63
00000063 00000000

what you want from this is
-----------------------------------------
00000000 15073C63
00000063 00000000
-------------------------------------------
15073C63
00000063

These parts of the code
-------------------------------------------
now switch sides for tcp gecko use

15073C63 00000063

now put it in those 2 empty boxes i mentioned in the beginning and poke

sadly this version of gecko has no lock for the value to freeze and not change (or atleast not that iv seen)

 

[Randymmmmm]

its not too bad to figure out, so im assuming you already have it ready to go on your wiiu, under the search tab there is 2 empty spots to put addresses and values in on the right near the bottom of tcpgecko right below where is says 0 results on the right side is values and left side is addresses (this is differnt on jgecko its backwards on that and i also see an extra set of address and values on thoes codes) but thats fine its not too hard to see what you need from a jgecko address to use on tcp gecko

example

00000000 15073C63
00000063 00000000

what you want from this is
-----------------------------------------
00000000 15073C63
00000063 00000000
-------------------------------------------
15073C63
00000063

These parts of the code
-------------------------------------------
now switch sides for tcp gecko use

15073C63 00000063

now put it in those 2 empty boxes i mentioned in the beginning and poke

--------------------- MERGED ---------------------------




sadly this version of gecko has no lock for the value to freeze and not change (or atleast not that iv seen)

--------------------- MERGED ---------------------------

so im really starting to think you need atleast 1 in your inventory to make it 99
i had no butterfly emblems and i still got nothing on that poke, but earlier i had 1 and made it 99
so maby thats how this games software works, dont know why its like that.

 

[Randymmmmm]

rupee code is

15073BC4 01F40000

(this is depending on which wallet you have , i still have the first one so 500 in hex value is 01F4)

and yes this is cosmocourtneys code

from
00020000 15073BC4
00001388 00000000

my wallet is max at 500 so my value is not 1388 and its on the left side of this addresses value not right for my code

so on tcp gecko type in as the address 15073BC4 and the value is 01F40000 or 13880000 if you have the 5000 wallet

 

[Randymmmmm]

just noticed the bait bag continence values are not on cosmocourtneys code page
so for the all purpose bait seeds address is (for tcp gecko)

15073C64 63636363 ------ tested and works
15073C68 63636363 ----- this one i didnt test but should work cuz of the pattern, it changes by 4 each time
and for the other bag that has the chu's in it will be

15073C60 63636363 ------ tested and works
15073C5C 63636363 ------ tested and works
this is covering 4 items at once on each code, even if you dont have any and it doesnt show up , as soon as you pick up 1 it will put it at 99 even if the tcp gecko isnt on, you need to activate the code once then save it and you should be good to go


this covers these items

boko baba seeds
golden feathers
knight belts
red chu jellys
green chu jellys
blue chu jellys
butterfly emblems
skull necklace
and maby more......i dont have all the items in my bag yet

 

[Randymmmmm]

Hyrule Warriors 1.8.0

Character Select
3560E19C 00XXFFFF
00 - Link
01 - Zelda
02 - Sheik
03 - Impa
04 - Ganondorf
05 - Darunia
06 - Ruto
07 - Agitha
08 - Midna
09 - FI
0A - Girahim
0B - Zant
0C - DEFEAT
0D - Lana

2C - Cia
2D - Volga
2E - Wizro
2F - Twili Midna
30 - Young Link
31 - Tingle

32 - Ganon <-- Fun in maps not meant for him however cannot use items :/
33 - Cucco

for an updated code it should be
Hyrule Warriors 1.10

3561780C 00XXFFFF


i did the math for the hex addition to make up for the updates and i still dont get this code to work,
what conditions in your game do you do when you got this to work, like what level and when did you activate the code, can you poke it while in a level or do you gotta do it from character select or what? i have never got this to work but i did find it my self by searching also, just in case i was off on the addresses being 9670 (in hex value) and 38512 (in decimal value) apart, but sofar any code from version 1.8 seems to be +9670 hex or +38512 dec. apart. you can add them here http://www.csgnetwork.com/hexaddsubcalc.html

cosmocourtney, can you try this out if you have some time?

--------------------- MERGED ---------------------------

by the way, does anyone know if you can hack a regular wii game in a wiiu with tcp gecko or jgecko?

 

[Mr.???]

May I please get help? It seem the new 2017 jgecko files are acting up once again and I seem not able to connect. And don't bother asking if I updated all the files. The answer is yes( they should really translate these errors into something the user can understand so we can fix it on our own) Thank you.

 

[JingleBells]

May I please get help? It seem the new 2017 jgecko files are acting up once again and I seem not able to connect. And don't bother asking if I updated all the files. The answer is yes( they should really translate these errors into something the user can understand so we can fix it on our own) Thank you.

View attachment 73728

You will get them error when you don't have the right IP for your Wii U.....Remember your Wii U IP can and will change if you are using DHCP router settings (which you are most likely using).
I recommend double check your Wii U IP...

 

[HackingNewbie]

for an updated code it should be
Hyrule Warriors 1.10

3561780C 00XXFFFF


i did the math for the hex addition to make up for the updates and i still dont get this code to work,
what conditions in your game do you do when you got this to work, like what level and when did you activate the code, can you poke it while in a level or do you gotta do it from character select or what? i have never got this to work but i did find it my self by searching also, just in case i was off on the addresses being 9670 (in hex value) and 38512 (in decimal value) apart, but sofar any code from version 1.8 seems to be +9670 hex or +38512 dec. apart. you can add them here http://www.csgnetwork.com/hexaddsubcalc.html

cosmocourtney, can you try this out if you have some time?

--------------------- MERGED ---------------------------

by the way, does anyone know if you can hack a regular wii game in a wiiu with tcp gecko or jgecko?

The code has to be

00020000 3561780C
00XXFFFF 00000000

if it's a RAM write which is what it looks like.

 

[Randymmmmm]

The code has to be

00020000 3561780C
00XXFFFF 00000000

if it's a RAM write which is what it looks like.

yes, if you are using jgecko but its the way i first put it if you are using tcp gecko

--------------------- MERGED ---------------------------

yes, if you are using jgecko but its the way i first put it if you are using tcp gecko

i will try that on jgecko tho cuz i still havent gotten that one to work yet

 

[HackingNewbie]

yes, if you are using jgecko but its the way i first put it if you are using tcp gecko

--------------------- MERGED ---------------------------


i will try that on jgecko tho cuz i still havent gotten that one to work yet

Make sure you're using this TCPGecko.elf or JGecko U doesn't work. Keep in mind that this TCPGecko.elf doesn't work with TCPGecko .NET because of a higher buffer data transfer. But, at least with this version of TCPGecko.elf fixes memory shifting which might be the problem.
Note:
You may have to make some of your codes again (like, find the address again).

 

[Randymmmmm]

Make sure you're using this TCPGecko.elf or JGecko U doesn't work. Keep in mind that this TCPGecko.elf doesn't work with TCPGecko .NET because of a higher buffer data transfer. But, at least with this version of TCPGecko.elf fixes memory shifting which might be the problem.
Note:
You may have to make some of your codes again (like, find the address again).

i had just seen it work for me yesterday so maby i was having connection issues for the first 5 trys..??..maby

 

[HackingNewbie]

i had just seen it work for me yesterday so maby i was having connection issues for the first 5 trys..??..maby

You still have to use that version of TCPGecko.elf though or searches don't work and the memory is blank, among other things.

 

[TheWord21]

So, I've run into a little snag...

Every time I try to open J Gecko U, this is what I keep running into, but the program doesn't show up after clicking the message away. Can anyone tell me what's going on? Do I have to have the Wii U on, or what? I've got the latest TCPGecko and Java, so...

 

[HackingNewbie]

So, I've run into a little snag...

Every time I try to open J Gecko U, this is what I keep running into, but the program doesn't show up after clicking the message away. Can anyone tell me what's going on? Do I have to have the Wii U on, or what? I've got the latest TCPGecko and Java, so...

Redownload JGecko U. Bully forgot to get rid of that debug message, but just updated it. Download from the JGecko U setup guide.

 

[TheWord21]

Redownload JGecko U. Bully forgot to get rid of that debug message, but just updated it. Download from the JGecko U setup guide.

Did that, but I'm sorry to say the message still shows up and the program refuses to open.

 

[HackingNewbie]

Did that, but I'm sorry to say the message still shows up and the program refuses to open.

Make sure you're pressing the OK button, not the X button.

 

[TheWord21]

Make sure you're pressing the OK button, not the X button.

I did press OK, and it's still pretty much the same story.

 

[HackingNewbie]

In the folder where JGecko U is located, hold shift while right-clicking and select "Open Command Window Here". Then type in:

java -jar "filename.jar"

filename is what you've called JGecko U