Hacking NOOB PARADISE - ask away

  • Thread starter Thread starter richglix
  • Start date Start date
  • Views Views 1,678,150
  • Replies Replies 15,247
  • Likes Likes 14
I've had trouble finding information on a problem I'm experiencing with Homebrew Browser. Please help, if you can.

In the past I have not had trouble downloading apps directly from the browser. In the past couple days I get the same error after about 1/3 of the download "failed creating folder". I do not have the lock on the SD card and have tried reinstalling the browser. I can still use installed apps and access the browser, just no downloads will work.

I've been out of the loop for a while, is the browser still supported?

If so, I may need direction to a good guide to on how to place downloaded apps (ex. genesis plus) on my sd card to fire them up on homebrew.

TIA.
 
Hey I was just wondering if there are any new pokemon battle revolution mods that has been made recently?
 
Hi there,
I'm hoping someone can help this noob, I just grabbed a "new" wii and have been trying to softmod to allow playing games from either sd card, usb thumb drive or usb hdd drive. I've been told that the usb thumb drive / hdd drive is easier is this true?

I have followed this guide: http://www.howtogeek.com/210185/how-to-install-the-homebrew-channel-on-a-nintendo-wii-the-easy-way/

I then tried to follow the link at the end about using a usb drive for games however this required a 3rd guide where the download links are dead which i can't therefore perform. Just to confirm all that has been actioned on the wii is the first guide. The nes, snes emulators appear to be working. Unsure what direction to go now, id like to get my wii games (iso's or I believe I can convert these?) playing from a sd / usb hdd / thumb drive (which ever is easier). I'd be grateful for any advice as these guides I've been using might be outdated and there is a lot of conflicting information online.
Please help.

Usb drive guide link (not done as identifies needs the below): http://www.howtogeek.com/howto/40349/install-a-wii-game-loader-for-easy-backups-and-fast-load-times/

3rd guide (with missing files - non of this has been done): http://www.howtogeek.com/howto/3804...ection-to-safeguard-and-supercharge-your-wii/
 
Last edited by ColdEagle,
Hi there,
I'm hoping someone can help this noob, I just grabbed a "new" wii and have been trying to softmod to allow playing games from either sd card, usb thumb drive or usb hdd drive. I've been told that the usb thumb drive / hdd drive is easier is this true?

I have followed this guide: http://www.howtogeek.com/210185/how-to-install-the-homebrew-channel-on-a-nintendo-wii-the-easy-way/

I then tried to follow the link at the end about using a usb drive for games however this required a 3rd guide where the download links are dead which i can't therefore perform. Just to confirm all that has been actioned on the wii is the first guide. The nes, snes emulators appear to be working. Unsure what direction to go now, id like to get my wii games (iso's or I believe I can convert these?) playing from a sd / usb hdd / thumb drive (which ever is easier). I'd be grateful for any advice as these guides I've been using might be outdated and there is a lot of conflicting information online.
Please help.

Usb drive guide link (not done as identifies needs the below): http://www.howtogeek.com/howto/40349/install-a-wii-game-loader-for-easy-backups-and-fast-load-times/

3rd guide (with missing files - non of this has been done): http://www.howtogeek.com/howto/3804...ection-to-safeguard-and-supercharge-your-wii/
USB drive is easiest. You need to install a cIOS first to use usb: https://sites.google.com/site/completesg/backup-launchers/installation
And you need to install a usb loader (preferably usbloadergx) https://sites.google.com/site/completesg/backup-launchers/usb
 
  • Like
Reactions: ColdEagle
Thank you, do I need to do anything with back up along the lines of bootmii or Priiloader? Before I attempt the above? If so does Priiloader still require a gc controller?

Make sure when following that cIOS guide that you choose "beta52" for both slots 249 and 250. I don't know why it suggests beta53 but that can lead to compatibility problems.

Priiloader works with either Wii remote or GC controller.
 
  • Like
Reactions: ColdEagle
Make sure when following that cIOS guide that you choose "beta52" for both slots 249 and 250. I don't know why it suggests beta53 but that can lead to compatibility problems.

Priiloader works with either Wii remote or GC controller.
Right, thanks for catching that! I'm worried I'll mess it up.
So if I follow, 2, 3, 4 and 5 here: http://gbatemp.net/threads/how-to-s...backup-wii-gamecube-and-wiiware-games.360687/
But i use the newer version of the apps eg priiloader 8 etc?
... I think step 1 is basically the same as the guide I followed earlier.....?
Oh and should I check and if needed update the hbc and bootmii?

And then cross reference with the above advice, should that cover me for all? Or do i totally ignore this and just follow the first steps above and use the correct version?
Sorry for all the noob questions!
 
Last edited by ColdEagle,
I am doing my research before modding my Wii U, and I think I have settled on FlimFlam69's Kernel Exploit guide. Does anyone have any experience with this guide? Any opinions greatly appreciated, I just want to do things right. Thanks!
 
I am doing my research before modding my Wii U, and I think I have settled on FlimFlam69's Kernel Exploit guide. Does anyone have any experience with this guide? Any opinions greatly appreciated, I just want to do things right. Thanks!

I'd ask that in the Wii U section. This thread is in the old Wii support area.
 
Would someone be able to just double check my confusion above before I go ahead? I'm just unsure which route I should take - I don't want to break anything without guidance from the pros?
Thank you
 
Need some help here guys. I'm trying to install CFW on a 3DS XL on 6.2.0-10E. I've got as far as running the nds file off the flash card but I get a blank screen rather than booting into decrypt. I'm using the Decrypt 9 (MSET) tut.
.
c7e1600ed49af75aae3dc3ee63811221.jpg

173514d69be2b76b0f787c3d954f0c63.jpg


abb53bdea878767eb722d694a8da0047.jpg


a32a554fde97d2f250c47948ec89ea98.jpg


96b709829c3cf467332994b9c7f7fa24.jpg


The off line hack is the only option available to be because each time I try and use the browser hack, it promote me to update. Any help or advice with this will be very much appreciated. Thanks in advance guys.

Sent from my XT1562 using Tapatalk
 
Need some help here guys. I'm trying to install CFW on a 3DS XL on 6.2.0-10E. I've got as far as running the nds file off the flash card but I get a blank screen rather than booting into decrypt. I'm using the Decrypt 9 (MSET) tut.
.
c7e1600ed49af75aae3dc3ee63811221.jpg

173514d69be2b76b0f787c3d954f0c63.jpg


abb53bdea878767eb722d694a8da0047.jpg


a32a554fde97d2f250c47948ec89ea98.jpg


96b709829c3cf467332994b9c7f7fa24.jpg


The off line hack is the only option available to be because each time I try and use the browser hack, it promote me to update. Any help or advice with this will be very much appreciated. Thanks in advance guys.

Sent from my XT1562 using Tapatalk
Post in 3DS help section?
 
Hi guys i want to ask... I just played resident evil umbrella chornicle with usbloadergx. But when i reached stage 2 mansion incident, it's stuck on loading.. And when i played zelda TP, it just stucked on security warning screen.. I checked both wbfs files with SHA verification onwii backup manager, it told me "pass" and has a green colored font. Did it means the wbfs are okay? i have update all my ios and cios with syscheck+modmii too.. Please help me
 
Right, Ive bought my daughter a brand new WII U for christmas, I assume its on the latest FW, if it is, can it be hacked? Can someone point me in the right direction of a tutorial which is easy to follow? Thanks in advance
 
Right, Ive bought my daughter a brand new WII U for christmas, I assume its on the latest FW, if it is, can it be hacked? Can someone point me in the right direction of a tutorial which is easy to follow? Thanks in advance

This is the Wii section. You might want to post this in the Wii U area.
 
Shit you are really working on this man, I'll help you out but we need to create like a form to fill for posting questions, that way it'll be more easy for everyone to find their problem in others post, something like:


My Wii is 3.2U (so now we know 2 things in one little number of information)
I was on 3.4U but I've done the Oct23rd FIX and used the cIOS and IOS Downgraders
I installed the cIOS36_r7 installer from Waninkoko thru the Wi-Fi method
I'm using the Backup Launcher 002 fix in HBC (.dol version)

Problem:
I "bought" PIKMIN last night and today tryed to launch it but only gave me a black screen, I burnt with NERO6 at 16X in Sony DiscID: D21 DVD+R, I have many games working with this DVD's working flawlessly, what did I do wrong...?? please help cause I am a n00b and other question, can you please post a picture of where the search button is please, everybody is telling me to use it, but I haven't been able to find it, thanks in advance...!!!
smile.gif




Something like that, huh..?? what do you say..??
biggrin.gif

If you're gonna burn a disc, you should do it at a slow speed so its more likely it'll burn without mistakes.
 
With this new NES class mini I got in the retro mood and decided to buy one for Christmas for my oldest daughter (6 years old)...wrong! That thing is sold out everywhere! So to find out if she's into gaming at all I thought it would be a good idea to try out some simpler older games first. So I hacked the Wii via ModMii (great programm btw) and now I've got a custom menu and everything but when it comes to running an installed Virtual Console channels the whole things turns black and I have to hold the power button to reset it again.
Can someone please give me some pointers?
 
With this new NES class mini I got in the retro mood and decided to buy one for Christmas for my oldest daughter (6 years old)...wrong! That thing is sold out everywhere! So to find out if she's into gaming at all I thought it would be a good idea to try out some simpler older games first. So I hacked the Wii via ModMii (great programm btw) and now I've got a custom menu and everything but when it comes to running an installed Virtual Console channels the whole things turns black and I have to hold the power button to reset it again.
Can someone please give me some pointers?

If they weren't purchased on that console then you either have to patch system IOSes to restore the signing bug or run them from an EmuNAND folder. The latter is easier and much safer. :)
 
  • Like
Reactions: mdmeneer

Site & Scene News

Popular threads in this forum