Homebrew [Help] Browserhax 9.2 trouble.

[SmugNipa]

So recently I moved my N3DS Emunamd to a bigger sd. But when I tried to reboot Browserhax on the bigger sd it just stopped on a red screen. I have a boot.3dsx and my 3ds folder so I am wondering why it isn't booting up. I used the exact same files yesterday. Anyone know how to fix this?

 

[Quantumcat]

So recently I moved my N3DS Emunamd to a bigger sd. But when I tried to reboot Browserhax on the bigger sd it just stopped on a red screen. I have a boot.3dsx and my 3ds folder so I am wondering why it isn't booting up. I used the exact same files yesterday. Anyone know how to fix this?

Red screen means it can't find boot.3dsx. Make sure it's on the root, and if it is, then maybe your SD card is faulty.

 

[SmugNipa]

Red screen means it can't find boot.3dsx. Make sure it's on the root, and if it is, then maybe your SD card is faulty.

It is on the root of my SD and it can't be faulty because it reads my SD Card.

 

[tomx86]

So recently I moved my N3DS Emunamd to a bigger sd. But when I tried to reboot Browserhax on the bigger sd it just stopped on a red screen. I have a boot.3dsx and my 3ds folder so I am wondering why it isn't booting up. I used the exact same files yesterday. Anyone know how to fix this?

Did you just copy everything from your small SD to The bigger one, if yes then it doesn't work that way. You must copy all data from your small SD root to a pc, make a emuNAND backup, make a new emuNAND on your bigger SD, then restore your backup to the new emuNAND, and copy everything from pc to the root of the new SD, use a entry point of your choice, and install menuhax anew, that's how I did it and it worked for me, good luck

 

[SmugNipa]

Did you just copy everything from your small SD to The bigger one, if yes then it doesn't work that way. You must copy all data from your small SD root to a pc, make a emuNAND backup, make a new emuNAND on your bigger SD, then restore your backup to the new emuNAND, and copy everything from pc to the root of the new SD, use a entry point of your choice, and install menuhax anew, that's how I did it and it worked for me, good luck

I have done that. After this Browserhax just freezes at a red screen.

 

[tomx86]

I have done that. After this Browserhax just freezes at a red screen.

Did you changed the date on your sysNAND to 01.01.2000 and time to 00:00, that bypasses the browserhax ban?

 

[SmugNipa]

Did you changed the date on your sysNAND to 01.01.2000 and time to 00:00, that bypasses the browserhax ban?

Yes. I am able to use the browser for whatever. It's just Browserhax freezes on a red screen despite me having all the right files on my root.

 

[tomx86]

Did you just copy everything from your small SD to The bigger one, if yes then it doesn't work that way. You must copy all data from your small SD root to a pc, make a emuNAND backup, make a new emuNAND on your bigger SD, then restore your backup to the new emuNAND, and copy everything from pc to the root of the new SD, use a entry point of your choice, and install menuhax anew, that's how I did it and it worked for me, good luck

Then I can't help you, sorry

 

[SmugNipa]

It

Then I can't help you, sorry

It's fine thanks for trying. Do you think if I use a different homebrew method it will boot up?

 

[SmugNipa]

I've read a lot about this before on other sites but there have been no solutions will I have to use cubic ninja?

 

[SmugNipa]

I think I may have found out what was going on a bit. I tried with my other sd's and homebrew popped up fine so I popped my 64 gig with my emuand in while in the homebew menu and all my apps and stuff showed up. So I installed menuhax. After that I tried going back to the homebrew menu using start to exit and it froze on the red screen. So I am guessing something on my sd is making the red screen appear. But what could it be?

 

[Quantumcat]

I think I may have found out what was going on a bit. I tried with my other sd's and homebrew popped up fine so I popped my 64 gig with my emuand in while in the homebew menu and all my apps and stuff showed up. So I installed menuhax. After that I tried going back to the homebrew menu using start to exit and it froze on the red screen. So I am guessing something on my sd is making the red screen appear. But what could it be?

Told ya :-)

 

[Posghetti]

I think I may have found out what was going on a bit. I tried with my other sd's and homebrew popped up fine so I popped my 64 gig with my emuand in while in the homebew menu and all my apps and stuff showed up. So I installed menuhax. After that I tried going back to the homebrew menu using start to exit and it froze on the red screen. So I am guessing something on my sd is making the red screen appear. But what could it be?

Drag the other SD Card's Homebrew files and such and replace the stuff you have on the one that's causing a red screen and see if that makes a difference or not.

 

[SmugNipa]

So I replaced all the new stuff with my old stuff (3ds folder, boot.3dsx) But it still is going to red screen with this SD. I would hate having to use two Sd's to go to emunand each time.

 

[TechyTurtle]

Just reformat sd or reset browser. That or use 32 gig

 

[SmugNipa]

Just reformat sd or reset browser. That or use 32 gig

Did both twice. And I don't really have any more spending money for a 32 micro sd.

 

[Quantumcat]

So I replaced all the new stuff with my old stuff (3ds folder, boot.3dsx) But it still is going to red screen with this SD. I would hate having to use two Sd's to go to emunand each time.

I was going to suggest installing a9lh but then I realised the faulty SD card might prevent the console even booting up (it has to read a file on boot up). But AW is working on a release of the no-sd-needed version (you can use it now but it has problems with DS mode). So I think your options are:

1. Buy new SD card, or
2. Use old SD card, or
3. Continue swapping them back and forth, or
4. Install a9lh then update to AW's branch but not use any DS games, or
5. Wait for the full release of the no-sd-needed branch and install a9lh, meanwhile do either of 2 or 3.

 

[TechyTurtle]

Wait if you go to the Wii homebrew ( I know this is radom) they have this as formatter and it may fix your 3ds check it out

 

[SmugNipa]

I was going to suggest installing a9lh but then I realised the faulty SD card might prevent the console even booting up (it has to read a file on boot up). But AW is working on a release of the no-sd-needed version (you can use it now but it has problems with DS mode). So I think your options are:

1. Buy new SD card, or
2. Use old SD card, or
3. Continue swapping them back and forth, or
4. Install a9lh then update to AW's branch but not use any DS games, or
5. Wait for the full release of the no-sd-needed branch and install a9lh, meanwhile do either of 2 or 3.

I wouldn't say it's faulty so it may work. I heard you can get A9LH without downgrading to 2.1. How would I be able to do that? Could you link me to a guide google has had nothing for me.

 

[Quantumcat]

I wouldn't say it's faulty so it may work. I heard you can get A9LH without downgrading to 2.1. How would I be able to do that? Could you link me to a guide google has nothing for me.

Https://github.com/Plailect/Guide/wiki Or download the whole guide and tools required from my page quantumc.at

When you get to the FBI injection part please please use the tool I made (it is on my page). If one person uses it then it won't feel like such a waste of a day making it :-(

I wouldn't use the faulty one for the OTPless method. There have been 3-4 bricks reported from using cards that stopped working briefly during the installation (this was a problem with Safearm9installer 2.5 and apparently fixed in 2.5.1)