Homebrew [RetroArch] Nightly builds here!

[teampleb]

@aliaspider said that he disabled the dynarec to test the core and found that the core was so slow to not using dynarec (he got 10-12 fps or something like that)
Also, shinyquagsire said that interpreter everytime will be slower than dynarec.

That's correct. But he did try to bundle the 3dsx. His reasoning for it not being there was crashing.

 

[Stack3r]

Please someone get psx working for 3dsx

 

[the_randomizer]

well.. you have that thread here with a list of serials that you can use as a guide to try to find one. But most of all, just be careful and be lucky. lol

Or if you try to get a used one, try to ask the seller which firmware it has.

So with the N3DS LL, as long as I'm 9.2 or below, I'm fine. Just making sure and thanks

 

[lemanuel]

So with the N3DS LL, as long as I'm 9.2 or below, I'm fine. Just making sure and thanks

Not sure if that's still valid since I never really paid much attention to that thread. But you should be able to use it as a guide like I said. Just avoid new batches since it's almost sure that they bring new firmware. Old batches in stores that don't sell much are more likely to have older firmware.

 

[sj33]

The people asking for a .3dsx of PCSX are missing the point. It uses dynarec, which is only possible with kernal access and is something not provided by Ninjhax2/Ironhax/Tubehax etc.

Even if a .3dsx were released, framerates would be single digit.

 

[teampleb]

The people asking for a .3dsx of PCSX are missing the point. It uses dynarec, which is only possible with kernal access and is something not provided by Ninjhax2/Ironhax/Tubehax etc.

Even if a .3dsx were released, framerates would be single digit.

Apparently it gets 10 - 15 FPS.

 

[coinblock]

Damn, gPSP just keeps getting better and better! Hope we get a core input remapping option soon!

 

[tony_2018]

This is pretty cool

 

[the_randomizer]

Apparently it gets 10 - 15 FPS.

I hope it doesn't stay like that forever.

 

[duwen]

Don't think the compatibility is better now than 24th. It could perhaps be your roms that aren't compatible with FBA. Roms over 50 MB don't work either.

My roms are fine - I'm using the latest (0.2.97.36) FBA romset, which although newer than the set used by the retroarch core uses all the exact same roms as far as 'parent' roms are concerned (there may be additional clones and bootlegs in the newer set, but I avoid all but 'parent' roms for the sake of simplicity on the 3ds).
As for the 50mb limit; I believe it's a lot lower. I've found some roms with an uncompressed size of less than 40mb won't boot.

You don't need to save anything, everything changed on the Settings gets saved automatically. Some settings are even shared among cores.

Well, nothing is saving in the config for me... regardless of it auto saving or manually saving, no changes are applied. I'll textedit it instead for the time being.

 

[730]

My roms are fine - I'm using the latest (0.2.97.36) FBA romset, which although newer than the set used by the retroarch core uses all the exact same roms as far as 'parent' roms are concerned (there may be additional clones and bootlegs in the newer set, but I avoid all but 'parent' roms for the sake of simplicity on the 3ds).
As for the 50mb limit; I believe it's a lot lower. I've found some roms with an uncompressed size of less than 40mb won't boot.


Well, nothing is saving in the config for me... regardless of it auto saving or manually saving, no changes are applied. I'll textedit it instead for the time being.

Maybe try deleting the retroarch folder and let it be created again?

 

[Stack3r]

I hope it doesn't stay like that forever.

I hope so too, that's garbage it has to have that dynarec -_-

 

[AtlasFontaine]

I hope so too, that's garbage it has to have that dynarec -_-

Is a garbage yeah but, the dynarec is making the core run stable with a decent amount of fps.

 

[sj33]

Dynarec is probably a requirement for it to realistically run at decent framerates. What we need is a kernel mode exploit for newer firmwares.

 

[the_randomizer]

I hope so too, that's garbage it has to have that dynarec -_-

Dynamic recompiliation is actually quite useful, it's a matter of optimizing it, and is more efficient. Over time, code will be optimized and more efficiently executed, speed boost will happen.

 

[VinsCool]

Dynamic recompiliation is actually quite useful, it's a matter of optimizing it, and is more efficient. Over time, code will be optimized and more efficiently executed, speed boost will happen.

It gives a huge amount of speedup, this is the best thing any platform benefits

 

[teampleb]

Dynamic recompiliation is actually quite useful, it's a matter of optimizing it, and is more efficient. Over time, code will be optimized and more efficiently executed, speed boost will happen.

To bad only people 9.2 or below can use it.

 

[VinsCool]

To bad only people 9.2 or below can use it.

I regret my update on my n3ds.

I still have a 9.0 nand backup made with gateway, I just need an hard mod lol

 

[the_randomizer]

To bad only people 9.2 or below can use it.

That...freaking sucks AND blows, so...in other words, most people are SOL, is there any glimmer of hope for future emulation development....? -_-

Maybe my wanting to get a 3DS was nothing but a mistake just like the last time I had on, go fig.

 

[Radius4]

Damn, gPSP just keeps getting better and better! Hope we get a core input remapping option soon!

ok that request I will take, it's really easy to implement anyway, I sent a PR, gotta wait for someone to merge it