Toggle sidebar

Hacking Pasta CFW - A CFW that allows unsigned CIA to be installed on Old and New 3DS! (required ninjhax)

  • Thread starter Thread starter capito27
  • Start date Start date
  • Views Views 1,426,048
  • Replies Replies 6,595
  • Likes Likes 123
Status
Not open for further replies.
Gadorach said:
Or, you could update straight to 9.2 with SysUpdater and 3DNUS, and not need a game at all.

https://gbatemp.net/threads/how-to-...om-4-1-8-1-to-9-2-0-20-with-pasta-cfw.389187/
Click to expand...

one question again, i read this instruction and get confusing,

5. Start Pasta, install sysupdater.
6. Launch sysupdater then follow the instructions

we do this 2 steps in the 3DS or in the PC

Start pasta, install sysupdater? i'm not sure, is this related to the pasta 1.2.1 zip in this topic

how can i start pasta and install sysupdater, all files been downloaded,

thanks.

PS. is it better to use the blank new SD card, or it's ok to use the old sdcard that CFW and games are in.
 
rebirthz said:
one question again, i read this instruction and get confusing,

5. Start Pasta, install sysupdater.
6. Launch sysupdater then follow the instructions

we do this 2 steps in the 3DS or in the PC

Start pasta, install sysupdater? i'm not sure, is this related to the pasta 1.2.1 zip in this topic

how can i start pasta and install sysupdater, all files been downloaded,

thanks.

PS. is it better to use the blank new SD card, or it's ok to use the old sdcard that CFW and games are in.
Click to expand...
Wait until you actually have Cubic Ninja. There is no MSET for 9.2, and SpiderPasta isn't ready yet.
Read the instructions carefully, and use the Gateway launcher to backup your NAND before you do anything.
If you mess up, you can easily break your console.
 
ok, i have to start at the beginning of installing the Pasta CFW with Cubic ninja,

after it's done, i'll get the Old 3DS which runs the 4.x Pasta CFW, after that just follow the instruction in 9.2 update via sysupdate topic and my console gets updated to the 9.2

am i right?

thanks for your help guys!

one last question as i asked at the PS. above, is it better to use the blank new SD card, or it's ok to use the old sdcard that CFW and games are in.
 
Slushie3DS said:
Hmm, I will definitely look in to that.
Click to expand...
Problem with that is, the launcher, whose behavior is the single most important point when trying to do ARM9 stuff, is predefined as Launcher.dat. A a python script injects the ARM9 payload into Launcher.dat. So we don't really know how it gets to ARM9.
 
rebirthz said:
ok, i have to start at the beginning of installing the Pasta CFW with Cubic ninja,

after it's done, i'll get the Old 3DS which runs the 4.x Pasta CFW, after that just follow the instruction in 9.2 update via sysupdate topic and my console gets updated to the 9.2

am i right?

thanks for your help guys!

one last question as i asked at the PS. above, is it better to use the blank new SD card, or it's ok to use the old sdcard that CFW and games are in.
Click to expand...

Please direct your questions here http://gbatemp.net/threads/pasta-cfw-technical-support-thread.389765/
 
  • Like
Reactions: Slushie3DS
Suiginou said:
Problem with that is, the launcher, whose behavior is the single most important point when trying to do ARM9 stuff, is predefined as Launcher.dat. A a python script injects the ARM9 payload into Launcher.dat. So we don't really know how it gets to ARM9.
Click to expand...
I'm not entirely worried with how it does it as long as we can use it for our ideas. That's all that really matters, right?
 
rebirthz said:
ok, i have to start at the beginning of installing the Pasta CFW with Cubic ninja,

after it's done, i'll get the Old 3DS which runs the 4.x Pasta CFW, after that just follow the instruction in 9.2 update via sysupdate topic and my console gets updated to the 9.2

am i right?

thanks for your help guys!

one last question as i asked at the PS. above, is it better to use the blank new SD card, or it's ok to use the old sdcard that CFW and games are in.
Click to expand...
You can use either, it make no difference. If you intend to install CIAs, you'll want a larger SD card though.
 
I find that FBI with SocketPunch works wonders and you don't have to take up space storing the CIA files on the SD in order to install.
 
Please help, I had this all up and running without issue on my old 3DS, but now I have a New 3DS XL that is 9.0.0.20U I run Pasta CFW fine, I then get into FBI and this is where I start to have issues:

If I try to install any .cia file to my sd card, I get the error: database does not exist (0x2b)

Initially my thought is that this is the issue in the first post:
If you get an error when installing a CIA with FBI, remember to make a title.db file in your "Nintendo 3DS/id1/id2/dbs" folder, and go to software management to fix the issue, you will then be able to install CIAs with FBI.
So of course I create the title.db file and put it in that folder. But then I go to data management in the 3DS settings (I assume thats what it means by software management), I'm not sure what more I need to do from there, I go into each option, but I don't know what it is I need to do to fix this issue, I try the process over again and I still get that issue.

So then I try installing a .cia to my NAND instead of the micro sd card, and that seemingly works, but no matter what, when I return to the menu, be it normally or through pasta, a block appears for a moment as if I have installed new software, but it quickly disappears.

Doe anyone have any idea what I am doing wrong here?
 
duffmmann said:
Please help, I had this all up and running without issue on my old 3DS, but now I have a New 3DS XL that is 9.0.0.20U I run Pasta CFW fine, I then get into FBI and this is where I start to have issues:

If I try to install any .cia file to my sd card, I get the error: database does not exist (0x2b)

Initially my thought is that this is the issue in the first post:
If you get an error when installing a CIA with FBI, remember to make a title.db file in your "Nintendo 3DS/id1/id2/dbs" folder, and go to software management to fix the issue, you will then be able to install CIAs with FBI.
So of course I create the title.db file and put it in that folder. But then I go to data management in the 3DS settings (I assume thats what it means by software management), I'm not sure what more I need to do from there, I go into each option, but I don't know what it is I need to do to fix this issue, I try the process over again and I still get that issue.

So then I try installing a .cia to my NAND instead of the micro sd card, and that seemingly works, but no matter what, when I return to the menu, be it normally or through pasta, a block appears for a moment as if I have installed new software, but it quickly disappears.

Doe anyone have any idea what I am doing wrong here?
Click to expand...

Not sure on the "Database does not exist" one, but on the matter of the CIA icon disappearing in SysNAND and Pasta is most likely from installing an out-of-region CIA, as Pasta does not have region free at the moment.

As a side note, when you go into your software management menu, it should tell you the database needs to be rebuilt, that's how you know you did the .db file thing right.

*edit*
Try adding both a blank title.db AND import.db file.
 
duffmmann said:
Please help, I had this all up and running without issue on my old 3DS, but now I have a New 3DS XL that is 9.0.0.20U I run Pasta CFW fine, I then get into FBI and this is where I start to have issues:

If I try to install any .cia file to my sd card, I get the error: database does not exist (0x2b)

Initially my thought is that this is the issue in the first post:
If you get an error when installing a CIA with FBI, remember to make a title.db file in your "Nintendo 3DS/id1/id2/dbs" folder, and go to software management to fix the issue, you will then be able to install CIAs with FBI.
So of course I create the title.db file and put it in that folder. But then I go to data management in the 3DS settings (I assume thats what it means by software management), I'm not sure what more I need to do from there, I go into each option, but I don't know what it is I need to do to fix this issue, I try the process over again and I still get that issue.

So then I try installing a .cia to my NAND instead of the micro sd card, and that seemingly works, but no matter what, when I return to the menu, be it normally or through pasta, a block appears for a moment as if I have installed new software, but it quickly disappears.

Doe anyone have any idea what I am doing wrong here?
Click to expand...
Are you in Pasta mode? At each reboot, it exits Pasta mode.
Is it an out-of-region game? If it is, launch it with YAGW Region Free Launcher.
Are you in the right thread? No. Technical support is here.
 
Last edited by motezazer,
  • Like
Reactions: Margen67 and Slushie3DS
CravingCritic said:
Not sure on the "Database does not exist" one, but on the matter of the CIA icon disappearing in SysNAND and Pasta is most likely from installing an out-of-region CIA, as Pasta does not have region free at the moment.

As a side note, when you go into your software management menu, it should tell you the database needs to be rebuilt, that's how you know you did the .db file thing right.

*edit*
Try adding both a blank title.db AND import.db file.
Click to expand...

The files disappearing seem to be due to the system NAND itself rejecting channels installed to it. Because I was able to fix my issue, I used the NTR Cfw spoof to use the shop and installed a small old title I had on my account (flipnote 3D) and then tried the process over and was able to install the same .cia files to my sd card.
 
duffmmann said:
Doe anyone have any idea what I am doing wrong here?
Click to expand...

How did you create the two .db files? If you cerated two .txt file and then renamed them, when you renamed were you able to see the .txt extension?
If not (extension hide checked in windows explorer) the name of you files was ending in .db.txt and the 3DS couldn't recognize them.
 
Spider support is great, but it will never work on N3DS due to the fact that it uses a different web browser. How long must I wait for CN-less N3DS support? Is it even possible?
 
Generation 16 said:
Spider support is great, but it will never work on N3DS due to the fact that it uses a different web browser. How long must I wait for CN-less N3DS support? Is it even possible?
Click to expand...
MSET :)
But you will need CN at least once (for downgrading MSET)
 
Hey @motezazer,

did you get your NAND dump from an unused N3DS? If yes, can you tell what your up to? I'm really wondering what you want to do with it.
 
Status
Not open for further replies.

Site & Scene News

Go to forum More news

Popular threads in this forum

Why did the price of 3ds shoot up ?

Hacking Homebrew Project  BlazerTube - a YouTube 3DS revival using the REAL app!

Homebrew app Emulator  [Release] 3DS-CLI - Run a real RISC-V Linux environment on the Nintendo 3DS

Hardware  2 Broken 3DSes, need help

Gaming  any good rpgs on 3ds?

Website for finding alternative games for 3DS

Hacking  Modding Reassurance

GodMode9 wont launch, holding START just goes to home screen