Hacking Running Virtual Console titles on vWii.

[Henkow]

A few things that come to mind:
- Make sure the channel NAND emulation is set to "full" in the settings (I think the setting starts this way, but you never know)
- What version of D2X do you have? v10 is better at emuNAND than v10-alt
- What titles were they? Some games are just not compatible. Could be bad luck that all 3 fall into that category.
- I know the SDHC card has to be FAT32 formatted (probably already is) and I'm not sure about this one but there's a possibility that it has a cluster size limit of either 64k or 32k so there MIGHT be a format problem on your SDHC card.

It´s set to FULL.
I got the d2x-v10-beta52 one.
I tried World of Goo, Bomberman Blast and UNO.
It´s formatted FAT32, I have also tried a smaller standard 2GB SD card with the same result, should I use NEEK2o or whatever it is? It was installed with the emunand but I removed it with ShowMiiWads.

 

[Maxternal]

should I use NEEK2o or whatever it is? It was installed with the emunand but I removed it with ShowMiiWads.

everything else looks good ... just not sure what you're talking about here ^ with this one since Neek2o should be separate from your emuNAND and should not show up in ShowMiiWAD's at all. I'm wondering if you accidentally removed something else?

 

[Henkow]

everything else looks good ... just not sure what you're talking about here since Neek2o should be separate from your emuNAND and should not show up in ShowMiiWAD's at all. I'm wondering if you accidentally removed something else?

Well in ModMii you don´t get a option to create a emuNAND without Sneek.

Too bad none uploaded a working wii NAND for this purpose.

 

[Maxternal]

Well in ModMii you don´t get a option to create a emuNAND without Sneek.

Too bad none uploaded a working wii NAND for this purpose.

If anything was removed from the emuNAND itself it might explain what's going on. Neek2o does not work with Wii U, correct, but it's completely separate from your emuNAND and having it sitting there won't break your emuNAND either. You might try again without using the "remove" option in ShowMiiWADs at all and see if it helps your problem.

 

[Henkow]

If anything was removed from the emuNAND itself it might explain what's going on. Neek2o does not work with Wii U, correct, but it's completely separate from your emuNAND and having it sitting there won't break your emuNAND either. You might try again without using the "remove" option in ShowMiiWADs at all and see if it helps your problem.

I have just tried that with the same result:/

Starting to get annoyed by this, I really can´t see why it wouldn´t wanna work.

Everything else have worked flawlessly.

 

[Henkow]

Gonna test with my vwiis NAND this time although I doubt that will work when the ModMii one didn´t.

 

[Maxternal]

I have just tried that with the same result:/
Starting to get annoyed by this, I really can´t see why it wouldn´t wanna work.
Everything else have worked flawlessly.

I can't see why not either.
You could always remove your current emuNAND and use the loader's option to extract your realNAND into emuNAND just as a test.
Other than that, maybe it's time for someone else to lend a hand here.

EDIT : 'd
ok, let me know if that works for you.

 

[Henkow]

I can't see why not either.
You could always remove your current emuNAND and use the loader's option to extract your realNAND into emuNAND just as a test.
Other than that, maybe it's time for someone else to lend a hand here.

Same result, took my realNAND with WiiFlow and in USB Loader GX I installed World of Go but the console froze once I launched it.

 

[Henkow]

Could anyone please test a NAND from ModMii and se if runs?

I must be doing something wrong when I constantly get "The system files are corrupted" msg.

 

[Maxternal]

hmm, I also remember that there's an option in USB Loader GX about extracting JUST the system config into the current emuNAND. It's near the NAND extract option. Try that with a modmii emuNAND. (I'm running out of ideas here.)

 

[Henkow]

hmm, I also remember that there's an option in USB Loader GX about extracting JUST the system config into the current emuNAND. It's near the NAND extract option. Try that with a modmii emuNAND. (I'm running out of ideas here.)

How do I choose to run that conf with ModMiis NAND?

Also Global settings on emuNAND refers do the settings I use in USB Loader GX with my realNAND right?

 

[Maxternal]

How do I choose to run that conf with ModMiis NAND?

Also Global settings on emuNAND refers do the settings I use in USB Loader GX with my realNAND right?

1. have the modmii emuNAND on your SD card
2. in USBLoader GX go to settings->features and near the bottom (IIRC) there's something about extracting system config files to emuNAND ... do that.

It should copy the system settings from your real NAND onto the modmii emuNAND you have on your SD card.

 

[Henkow]

1. have the modmii emuNAND on your SD card
2. in USBLoader GX go to settings->features and near the bottom (IIRC) there's something about extracting system config files to emuNAND ... do that.

It should copy the system settings from your real NAND onto the modmii emuNAND you have on your SD card.

I tried but ended up with the annoying "The system files are corrupted" message.

 

[Henkow]

The only thing I haven´t ruled out is if my SDHC card is formatted improperly, I used it for my Raspberry Pi before so I ended up formating it with my digital camera.

Edit: But all mt other apps runs from it and don´t have any issues whatsoever.

 

[Henkow]

1. have the modmii emuNAND on your SD card
2. in USBLoader GX go to settings->features and near the bottom (IIRC) there's something about extracting system config files to emuNAND ... do that.

It should copy the system settings from your real NAND onto the modmii emuNAND you have on your SD card.

I´ve noticed a strange thing, channels installed on my realNAND work in emuNAND while my channels/wiiware on my emuNAND that aren´t installed on my realNAND are the one who brings up the System files are corrupted message.

So it feels as my system files can´t be corrupted when I can run channels on realNAND (when they also are installed on my realNAND).

 

[Maxternal]

I´ve noticed a strange thing, channels installed on my realNAND work in emuNAND while my channels/wiiware on my emuNAND that aren´t installed on my realNAND are the one who brings up the System files are corrupted message.

So it feels as my system files can´t be corrupted when I can run channels on realNAND (when they also are installed on my realNAND).

So, if I understand right, the channels you already had on your real NAND and extracted over into the emuNAND work on both emuNAND and real NAND but the ones that you installed with either the USBLoaderGX WAD installing feature or ShowMiiWADs DON'T work off of emuNAND?
Have you tried installing those WAD files into your real NAND with a WAD manager to see if they run fine off of your real NAND? and if they do, there's always the possibility of installing at least what will fit onto your real NAND and THEN extracting real NAND into your emuNAND and see if it works THAT way (and then deleting them off of real NAND to save space ... and perhaps repeating the install/extract/delete process until you've gotten them all build up on your emuNAND ... I do assume extracting emuNAND doesn't delete existing emuNAND files but I could be wrong.)

 

[Henkow]

So, if I understand right, the channels you already had on your real NAND and extracted over into the emuNAND work on both emuNAND and real NAND but the ones that you installed with either the USBLoaderGX WAD installing feature or ShowMiiWADs DON'T work off of emuNAND?
Have you tried installing those WAD files into your real NAND with a WAD manager to see if they run fine off of your real NAND? and if they do, there's always the possibility of installing at least what will fit onto your real NAND and THEN extracting real NAND into your emuNAND and see if it works THAT way (and then deleting them off of real NAND to save space ... and perhaps repeating the install/extract/delete process until you've gotten them all build up on your emuNAND ... I do assume extracting emuNAND doesn't delete existing emuNAND files but I could be wrong.)

Exactly!

Is there any way that installing a wiiware .wad may result in a brick?

EDIT: Nevemind IT WORKS , FINALLY!

I had used ModMiis Nand as the emuNAND the whole time, the only time I tried the vwiis NAND as emuNAND was when I used the USB Loader GXs WAD install function.

When using my vwiis NAND + ShowMiiWads it WORKS!

I will need to do some more extensive testing (only tried Bomberman Blast) but it booted.

All other tries have resulted in the corrupted system files message which froze the system.

Almost gave up .

 

[Henkow]

Also do you have any idea on how to get rid of th black bars? There aren´t 4:3 proportions, but noticable black bars. When running a Wii game of USB Loader GX it runs in full 16:9.

 

[Maxternal]

Exactly!

Is there any way that installing a wiiware .wad may result in a brick?

The only thing is if their banner is broken but I think if the banner shows up in USBLoaderGX you should be fine.

 

[Henkow]

The only thing is if their banner is broken but I think if the banner shows up in USBLoaderGX you should be fine.

Do you have any idea of why i get the error code 20109 when trying to play a wiiware game online?

I think I read somewhere than emuNAND + wiiware = offline play if the emuNAND don´t got a genuine wii key tied to it, but since this is my vwiis NAND I thought that it would work without a problem!