Hacking SWITCH NOOB PARADISE - Ask questions here

[Hayato213]

So the switch was jailbroken with rp2040 chip. Emunand was functioning flawless but ofw won't boot, only to this color screen. In my opinion something was messed up with installing jailbreak chip

Sound like corrupted NAND, that is pretty common with RP2040.

 

[Dlacica]

Sound like corrupted NAND, that is pretty common with RP2040.

What are my options?

 

[Hayato213]

What are my options?

You have NAND backup? That is an OLED correct?

 

[Dlacica]

Oled, no nand backup. I bought it like this

 

[Hayato213]

Oled, no nand backup. I bought it like this

The problem is the chip, if you installed an instinct-NX V6 or HWFLY V4/V5 you wouldn't have this problem,

 

[Dlacica]

I've bought it without the chip but it was previously installed. So no way I can ever again boot into ofw?

 

[Hayato213]

I've bought it without the chip but it was previously installed. So no way I can ever again boot into ofw?

Since you have no NAND backup, I don't know if you can use a hardware programmer with emmchaccgen to rebuild your NAND, the other option is to replace the modchip, probably can get it working again if you use HWFLY V4 or V5 chip or Instinct NX.

 

[GuilhermePedroso]

Hello, i have a switch modded with the rp2040, im on fw 17, i have the latest atmosphere, latest hekate, latest everything.
I installed super mario wonder via dbi installer, it installed all correctly but when i try to open it it gives me 2155-8007 error and i cannot open it. Everithing works fine but i cannot install new games...
Any solution?

 

[Dlacica]

Since you have no NAND backup, I don't know if you can use a hardware programmer with emmchaccgen to rebuild your NAND, the other option is to replace the modchip, probably can get it working again if you use HWFLY V4 or V5 chip or Instinct NX.

I think I can still use it with modchip, only ofw is the problem

 

[Adelherz]

Don't give up. I had the same thing happen. Try installing the atmosphere prerelease on the sd card and booting into it, it has a fix for the error you likely have (runs automatically). if that doesnt work, I used Emmchaccgen with my old prod keys file and the 17.0 firmware update to generate a new boot and then tegraexplorer with the firmware update script and I can now boot to stock.

"atmosphere prerelease"? do you have any instructions or links for which files i have to use and where?

Post automatically merged: Oct 19, 2023

very old guide, use: https://rentry.org/SwitchHackingIsEasy

is it just enough to delete all files on the sd card and start with one of those guides? which one should i pick?

 

[impeeza]

Hello Guys.
I have bougth several years ago switch V1 with soox and dongle. I'm using them to play game by lanching them with dongle.
I want to play new game like Mario Wonder but I read what I need to install Atmosphere on my switch can you please help me ?
DO I still need the dongle ?

Thanks

you didn't use the dongle to run the games, you use the dongle to inject a payload at the power on of the console and be able to run a CFW The CFW alloys you to run homebrew.

You will still need the dongle, you can migrate your current setup from that CFW to Atmosphère, you can read and follow the guide>

https://rentry.org/mys8q

I suggest you to read all the guide on https://rentry.org/SwitchHackingIsEasy to start understanding the concepts.

Once you migrated your setup from that CFW to Atmosphère, you can upgrade your firmware and use any game you like.

Also I do recommend to change your Dongle to use ArgonNX-SE as your payload.

Post automatically merged: Oct 19, 2023

"atmosphere prerelease"? do you have any instructions or links for which files i have to use and where?

https://gbatemp.net/threads/updating-hekate-atmosphere-and-hos.631739/post-10271786

 

[Adelherz]

you didn't use the dongle to run the games, you use the dongle to inject a payload at the turn on of the console and be able to run a CFW The CFW alloys you to run homebrew.

You will still need the dongle, you can migrate your current setup from that CFW to Atmosphère, you can read and follow the guide>

https://rentry.org/mys8q

I suggest you to read all the guide on https://rentry.org/SwitchHackingIsEasy to start understanding the concepts.

Once you migrated your setup from that CFW to Atmosphère, you can upgrade your firmware and use any game you like.

Also I do recommend to change your Dongle to use ArgonNX-SE as your payload.

Post automatically merged: Oct 19, 2023

https://gbatemp.net/threads/updating-hekate-atmosphere-and-hos.631739/post-10271786

great now i have a working switch again thanks! (i used the 1.6.1 prerelease)

1. So when i wanna play my private games i use Atmosphee CFW and for my bought games for playing online i use Stock SysNAND right?
2. When i open SysNAND my serial number is XAW000000000, is it correct like that?
3. I used to have 3 options to Launch 1. EmuNAND 2. SysNAND 3. Stock or something. Wasnt that better?
4. I used to boot into hekate when i rebooted my device so i didnt need a payloader to change the NANDs. How can i get this back?
5. I moved the files from the switch folder from my sd card backup into the almost empty new switch folder so i would have my apps again like Goldleaf which i used to install the nsp files, but its only showing a very low amount of these apps now ...

 

[impeeza]

great now i have a working switch again thanks! (i used the 1.6.1 prerelease)

1. So when i wanna play my private games i use Atmosphee CFW and for my bought games for playing online i use Stock SysNAND right?
2. When i open SysNAND my serial number is XAW000000000, is it correct like that?
3. I used to have 3 options to Launch 1. EmuNAND 2. SysNAND 3. Stock or something. Wasnt that better?
4. I used to boot into hekate when i rebooted my device so i didnt need a payloader to change the NANDs. How can i get this back?
5. I moved the files from the switch folder from my sd card backup into the almost empty new switch folder so i would have my apps again like Goldleaf which i used to install the nsp files, but its only showing a very low amount of these apps now ...

View attachment 400181

if you are affraid of been banned you can go to the official thread:https://gbatemp.net/threads/nintendo-switch-banning-hub-warning.508710/

 

[illlmac]

looking for some help, just got my RP2040 Picofly oled from getting the chip installed. i used the HATS pack to setup my sd card and now i keep getting this error on my SYSNand (CFW). it takes about 10 seconds before it pops up.

i looked for the folder in content but i do not see a folder with that program name.

 

[impeeza]

if you are usins Sys-Patch module try to desactivate (remove the flag file) and start again and look if yor SD card have a folder SDMC:/atmosphere/contents/010000000000025 and rename it

the title 010000000000025 is NIM service and i don't think is modified by themes.

as you are using a prepackaged installation I also exhort you to download latest Atmosphère and update the one on your SD card, and Update your payloads also.

Latest Atmosphère as today: https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.6.1-prerelease

 

[illlmac]

so i just created an emummc and when i went to launch it i got an error so i took out the sd card and plugged it in my pc and it wiped everything except for these folders

 

[impeeza]

Bootloader, is the folder of Hekate
emuMMC should have the files of emuNAND (if is file based) and Nintendo folder of the emuNAND.
Warmboot_mariko I don know but I haven't pay to much attention to mariko consoles because I don't own one.


you need at least Atmosphère to be copied to that SD Card. better if is 1.6.1

 

[illlmac]

im just confused as to why it deleted mostly everything after having created the EmuMMC. bug i clicked the link you posted and got the latest atmosphere from there. Also i looked in SDMC:/atmosphere/contents/but did not find the folder 010000000000025.

 

[impeeza]

This guide could help you to understand the basics and how to setup your SD card:

https://rentry.org/SwitchHackingIsEasy

 

[illlmac]

cool thank you ill check it out!

Post automatically merged: Oct 20, 2023

if you are usins Sys-Patch module try to desactivate (remove the flag file) and start again and look if yor SD card have a folder SDMC:/atmosphere/contents/010000000000025 and rename it

the title 010000000000025 is NIM service and i don't think is modified by themes.

as you are using a prepackaged installation I also exhort you to download latest Atmosphère and update the one on your SD card, and Update your payloads also.

Latest Atmosphère as today: https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.6.1-prerelease

so i just saw the Sys-Patch module on the tesla overlay, how do i disable it?