Is this procedure safe?Try the RCM jig, enter RCM mode, it reset the chip.
If this doesn't work, what next? I can't find a single post with anyone else having the same problem.
Is this procedure safe?Try the RCM jig, enter RCM mode, it reset the chip.
Is this procedure safe?
If this doesn't work, what next? I can't find a single post with anyone else having the same problem.
It is safe , it is just to reset the chip, but im not sure if your glitching time would be any better. I would leave it alone if it glitch 100% of the time.
What causes slow glitch time? I don't have this problem on my other switch.
NH Switch Guide https://nh-server.github.io/switch-guide/
| Homebrew Guide https://switch.homebrew.guide/index.html
|
Hello,
I got an unpatched switch and wanted to try getting into HB with help of a guide. Seems there are two major ones iv'e seen: NH Switch Guide and Homebrew Guide. I wanted advice for which one to follow, and general pro/con of each. I made a crude summary table doc for comparison. Thanks!
Also, since this is a 2nd, prev used switch with a factory reset, do the risks of banning still exist if emuNAND is connected online? I assume so.
NH Switch Guide
https://nh-server.github.io/switch-guide/
- Getting Started (Check Patched)
- Check if Patched (Serial Number)
- Install 1 free eshop game/app/demo
- RCM
- emuNAND
- sysNAND
- Entering RMC
- RCM Jig
- Sending Payload (Tegra, Hekate)
- Install TegraRcmGUI
- Inject Hekate payload
- Partition SD
- Inject Tegra payload > Partition the SD > Fat32 + emuMMC
- SD Preparations
- Add a bunch to SD card
- Making emuMMC
- Inject Hekate > create emuMMC > SD Partition > Part 1
- Change emuMMC > SD RAW 1
- NAND Backup
- Hekate > Tools > Backup eMMC > eMMC BOOT0 & BOOT1 / eMMC RAW GPP
- Keys Backup
- Hekate > Lockpick_RCM > sysNAND
- Launching CFW
- RCM > Inject Hekate > Launch > Atmosphere
- Accessing Homebrew Menu (place NRO file into /switch folder
- Updating CFW
Homebrew Guide
https://switch.homebrew.guide/index.html
- Before getting stared
- Fusee-gelee (hardware)
- Deja-vu (software via browser)
- Nereba (1.0.0)
- Caffeine (2.0.0-3.0.0; 4.0.1-4.1.0)
- Checking RCM
- Access RCM
- Check if Patched (TegraRcmGUI)
- Choosing an Exploit
- Fusee-gelee
- Nereba
- Caffeine
- SD Card Setup (through PC)
- Get homebrew pack
- Extract to PC and copy to SD Card
- Safety Precautions
- Backup NAND
- RCM > Hekate > Tools > Backup eMMC > eMMC BOOT0 & BOOT1 / RAW GPP
- Backup BIS Keys
- RCM > Lockpick_RCM (Dump form sysNAND) > switch/prod.key
- DNS Blocking
- blocks eShop, online play, updates
- After Setup [Launching CFW]
- Launch Atmosphere: Hekate > Launch > CFW (sysMMC)
- Accessing Homebrew Menu (place NRO file into /switch folder
- Hold R when launching title
- Create an emuMMC
- Hekate > Partition SD Card > drag emuMMC (RAW) to 32 GB > back to Home Menu > eMMC > Create eMMC > select SD Partition > Part 1
Alright next we're gonna try something a little different. Have you ever heard of Maintenance Mode? Its fine if you haven't. What you're going to do is turn off your console if it isn't powered down already. Then you're going to turn it on but as you're turning it on, you're going to hold down the volume + and - buttons. If successfully executed, you will enter Maintenance Mode. From here, there is nothing else you need to do. Simply exit or turn the console off then try launching or installing the games again.@Draxzelex
grabbed tinwoo and NS-USB and......installs gave exactly the same errors as my initial post
'the software has closed due to an error' with the 2x DLC files, and the combined XCI tries to get internet connection and then just goes to 'internet settings or cancel' screen.
Do you have any more ideas I could try?
Hekate uses an update.bin file whenever you push a newer version of Hekate so ultimately, it doesn't matter what version of Hekate you send as a payload. Anyways, what is the error message you see?My Switch battery drained out and I cannot turn it on anymore. Previously I used TegraRcmGUI and hekate_ctcaer_X.X.X.bin to turn it on when this happened but this time I'm not sure which hekate_crcaer_X.X.X.bin file version I used the last time I updated the CFW, is that important? Should I always wake it up with the same hekate_crcaer file version or it can be any?
Anyway, I managed to turn it on and boot into Hekate but on launch it gives me error.
how i can use atmospherèe 1.6.0 for boot an mariko in sysnand without cfw ?
Post automatically merged:
Hello guys, i dont understand so much about the configs of hekate,i have an switch Mariko, i updated the sysnand to the last version, now i cant power on sysnand, i only can power on, Emunand, can someone help how i can configure hekate to power on sysnand using the 1.6.0 atmospherèe?
So , thats no way to bot my console on sysnand ? Cause my console is a chip console ?Hekate needs a new update.
So , thats no way to bot my console on sysnand ? Cause my console is a chip console ?
I never update my Emummc, only when i have to do it , i only update the sysmmc , its the first time that i cant enter on my OFW when i update it.Just wait for update, people jump the gun and update when firmware just came out yesterday.
I never update my Emummc, only when i have to do it , i only update the sysmmc , its the first time that i cant enter on my OFW when i update it.
https://github.com/CTCaer/hekate/issues/616Please help, I'm getting an error: Failed to match warmboot.
Post automatically merged:
Please help, I'm getting an error: Failed to match warmboot.
Загрузитесь в sys CFW или в стоковой версии, чтобы исправить теплую перезагрузку.