View attachment 375522
I guess is a 0603 package
Sorry for the questions I'm pretty new to this, based on what you said is this:
The correct resistor I'm looking for?
Thanks!
View attachment 375522
I guess is a 0603 package
No, you found a resistor, but you need a capacitor.Sorry for the questions I'm pretty new to this, based on what you said is this:
View attachment 375569
The correct resistor I'm looking for?
Thanks!
Picture of your mosfet install? What version spec mosfets are you using? Any pull down resistors attached? If so what value are those resistors? Is the smoke coming out of the console motherboard in a certain location or from the mosfets directly?okay sometimes ive botched some mosfet installs and as soon as i turn them on, i see smoke comming out of the console, as soon as that happens, i turn it off. I take out the mosfets to see what i did wrong, test them to see which one is shorted but for they both pass... what? shouldnt one be shorted? it fent up in fucking smokes so.
dont have pictures of that previous install, IRFHS8342, no resistors, honestly i paniced so i couldnt see where it exactly came from, but i think that if it came from the console, it wouldnt have had turned on right?Picture of your mosfet install? What version spec mosfets are you using? Any pull down resistors attached? If so what value are those resistors? Is the smoke coming out of the console motherboard in a certain location or from the mosfets directly?
Hard to help without pictures and visuals of your solder joints and work in general. Regards to where the smoke came from, probably the mosfet. Was it a double mosfet install? Remember, resistors generally limit current to a diode or part of a circuit so it doesn't get over loaded with current. If this happens, heat follows etc etc What awg wires did you use? The botched switch with this problem, does it still work at all?dont have pictures of that previous install, IRFHS8342, no resistors, honestly i paniced so i couldnt see where it exactly came from, but i think that if it came from the console, it wouldnt have had turned on right?
Format card in Fat32.i have v2 with no wifi detected its in 13. and when i insert the sd it is asking for update...can i update it using daybreak after mod? will it ask for update and will prevent me going to album, daybreak?
yeah, worked perfectly, just got new mosfets and the hacked worked and the switch worked too.double mosfet, sorry that i couldnt provide pictures, if this ever happens again ill let you know. Thannk you anyways!Hard to help without pictures and visuals of your solder joints and work in general. Regards to where the smoke came from, probably the mosfet. Was it a double mosfet install? Remember, resistors generally limit current to a diode or part of a circuit so it doesn't get over loaded with current. If this happens, heat follows etc etc What awg wires did you use? The botched switch with this problem, does it still work at all?
Can you take another picture here, looks like a lifted pad (although it should work without that cap but you never know).yeah, worked perfectly, just got new mosfets and the hacked worked and the switch worked too.double mosfet, sorry that i couldnt provide pictures, if this ever happens again ill let you know. Thannk you anyways!
Post automatically merged:
New problem though (this is adifferent switch btw) modchip saying mosfet issue, these are brand new mosfets. i think i did the install properly. But i just dont get why its not working? anything you guys see that i mightve done wrong? thanks!
What size are your wires and I can't see your pull down resistor on the mosfet install!?yeah, worked perfectly, just got new mosfets and the hacked worked and the switch worked too.double mosfet, sorry that i couldnt provide pictures, if this ever happens again ill let you know. Thannk you anyways!
Post automatically merged:
New problem though (this is adifferent switch btw) modchip saying mosfet issue, these are brand new mosfets. i think i did the install properly. But i just dont get why its not working? anything you guys see that i mightve done wrong? thanks!
If not asking too much (already asking) can someone please mark the necessary points of the emmc to reball on a switch lite? I'm looking to pass some jumper wires and want to know the absolute necessary balls of the emmc to make a trail
The cknsole just need these three poibts to work?a3, m5, m6 if that is the emmc pinout
Oh no those are just the points used by the mod. All the rest of the labelled points are neededThe cknsole just need these three poibts to work?
I see a lot of points with the same label....maybe can use just oneOh no those are just the points used by the mod. All the rest of the labelled points are needed
The source is bridge, its just at a glaring angle that looks bad haha. Ill fix the other thing though.Can you take another picture here, looks like a lifted pad (although it should work without that cap but you never know).
Also you should bridge the Source terminal because it is all going through single mosfet the way it is.
And, I would suggest a bit thicker wire for this installation.
0.10m, i dont have a resistor in this install, didnt know one was needed, ive done several instals without one so im curious on what its used for? And the second wire is there, i swear lol look closely and you can see a little bit of it. Ill fix the caps, 1 sec.What size are your wires and I can't see your pull down resistor on the mosfet install!?
That Cap looks toast and is probably why your getting mosfet error, there barely anything for the mosfet wire to adhere too.
There seems to be only one gate wire on your pico board at point 15!? Where is the second one?
I removed the regulator of the rp but the shortcut between gnd and 3.3v persisted so i removed all the rp2040 and now the switch at least works fine in ofw mode, the battery was completely drained and took some time to charge, maybe the shortcut of the rp2040 drained it, i tried to turn on the rp2040 outside the switch but no lights blinked so i think is damaged. I will replace the rp2040 for a new one and change the 3.3v point to the emmc board instead of the cap, and maybe i will use a rp 2040 tiny instead of the zero.Yes, thats the one. Some people used to remove it so it fits a little better but to be honest I don't remember it being recomended to remove it from the functional perspective