Hacking SWITCH NOOB PARADISE - Ask questions here

[Veralyn]

We might have to compile it under the new libnx. I can do it real quick if you want to try it.

I have achieved my goal, so i don't need it But it might help someone else out perhaps if they check the Avatool thread, I'm happy to test it out though if you want to do it.

 

[binkinator]

I have achieved my goal, so i don't need it But it might help someone else out perhaps if they check the Avatool thread, I'm happy to test it out though if you want to do it.

Cool! I attached a hacky build to the original thread over here:

https://gbatemp.net/threads/avatool-homebrew-tool-to-change-avatars.525654/post-10089017

 

[Veralyn]

Cool! I attached a hacky build to the original thread over here:

https://gbatemp.net/threads/avatool-homebrew-tool-to-change-avatars.525654/post-10089017

Hm windows exploror nor 7zip wants to unzip this. Says the file/folder is invalid.

 

[binkinator]

Hm windows exploror nor 7zip wants to unzip this. Says the file/folder is invalid.

it is not now a zip file. Change the .zip to .nro. Imjust changed the name so I could upload it to GBATemp.

 

[Dust2dust]

Hm windows exploror nor 7zip wants to unzip this. Says the file/folder is invalid.

it is not a zip file. Change the .zip to .nro. Imjust changed the name so I could upload it to GBATemp.

Probably would have been better to just zip the nro file and not renaming anything. Windows users sometimes have trouble with their hidden file extensions.

 

[binkinator]

Probably would have been better to just zip the nro file and not renaming anything. Windows users sometimes have trouble with their hidden file extensions.

Fixed. It is now a true zip file with a .nro file inside. Just place it in /switch dir and good to go.

 

[Veralyn]

Fixed. It is now a true zip file with a .nro file inside. Just place it in /switch dir and good to go.

It still crashes on boot (full ram mode) "The software was closed because an error occurred".

 

[binkinator]

It still crashes on boot (full ram mode) "The software was closed because an error occurred".

OK. It’s bigger than a bread box. Thank you for trying! We’ll just have to wait for @JK_ to take a look.

 

[NoClueatall]

Could someone on here posable help? ive just had a hyfly v4 install installed to my sons v2 switch. Am I correct thinking I only need to follow this part of this guide rentry .org EristaSXCoreEmuNAND to be able to start uploading games to it??
I remember reading on another thread about flashing the v4 chip due to higher voltage or something???

 

[Hayato213]

Could someone on here posable help? ive just had a hyfly v4 install installed to my sons v2 switch. Am I correct thinking I only need to follow this part of this guide rentry .org EristaSXCoreEmuNAND to be able to start uploading games to it??
I remember reading on another thread about flashing the v4 chip due to higher voltage or something???

if it work fine leave it alone, pretty sure the recommend firmware update was for people that was on v3 0.1.0 HWFLY.

 

[NoClueatall]

if it work fine leave it alone, pretty sure the recommend firmware update was for people that was on v3 0.1.0 HWFLY.

Thanks
Im just following a guide to get setup.
could you tell me what the best payload to use ?
also should i create a EmuNAND CFW or SysNAND ?

 

[Hayato213]

Thanks
Im just following a guide to get setup.
could you tell me what the best payload to use ?
also should i create a EmuNAND CFW or SysNAND ?

I have mine setup to load hekate first, you can decide if you want to use sysnand or a emunand, emunand take up 29GB on the SD card.

 

[NoClueatall]

I have mine setup to load hekate first, you can decide if you want to use sysnand or a emunand, emunand take up 29GB on the SD card.

Ive got Hekate on it working but the guide says to add a payload of choice to the bootloader/payloaders folder do i need to do this? if so what payloader

 

[Hayato213]

Ive got Hekate on it working but the guide says to add a payload of choice to the bootloader/payloaders folder do i need to do this? if so what payloader

Yes payload like lockpick_RCM goes in there, that is the default folder it looks for when using hekate.

 

[Draxzelex]

sucks. thanks for the information!

Post automatically merged: Mar 2, 2023

so, even booting into stock sysnand on a modded switch and going online risks a ban?

If all you ever do is boot Stock, its not an issue. But if you ever boot CFW or homebrew then proceed to go online even in Stock, you risk a ban. That is because the Switch is a telemetry monster that records everything that happens while the OS is running so the actions you perform in CFW will persist when you reboot back into Stock.

 

[worm28]

Does anyone know where on the sd card the photo channel pics are stored i know it in SD/private/wii but im lost from there any help would be very appreciated.

 

[miniadri]

Try the advice found in this thread.

I suppose you can. It does help in finding the files needed to use CFW and homebrew. Keep in mind not all hacks work on all consoles. For example, Mariko units cannot utilize reboot to payload.

It depends who you ask. Worth is subjective and while some people focus on the positives. others will look at the negatives. Objectively speaking, there are a plethora of things you can only do with a modded Switch and the worst case scenario is that you are banned. However even in the worst scenario, there are ways to emulate online multiplayer such as LAN play or Xlink Kai so being banned isn't the end of the world. Couple that with the fact that hackable consoles, even banned, sell for far more than MSRP than consoles that require a modchip to be hacked and you will understand that many people are interested in hacking their device.

The most obvious risk was already stated to be being banned however there are ways to avoid a ban even with a modded Switch. The only other risk is the potential to brick the device. But as long as you create a dump of the eMMC (and BOOT0/1), you can always recover from a brick. Outside of that, there aren't really any other risks associated with hacking a Nintendo Switch. Of course, all of this only applies if your console isn't patched. If it is, then you will need solder a modchip inside which opens a whole other can of worms.

Thanks, it works now perfectly, i use Deep Sea now, maybe i updated something wrong, i'm going to use this pack from now

 

[rems1989]

Hi sorry for this kind of post again and again but couldn't find answer.. i'm back on my switch which was on sxos with an emunand.
I dit this tuto to go to atmosphere : rentry.org/mys8q with the "SysNAND users" parts

After done it, I see after that I have to format my sdcard to FAT32. So I did it and bring back all my files into the sd card.

Now I'm trying to launch with the dongle and the jig as usual with volume + and power but now nothing happen.. no hekate, no sxos..

A really big thanks to help me on it
I'm a noob so please keep it simple if possible

What dongle are you using?

Please share you /bootloader/hekate_ipl.ini file.

Thanks for your answer.

My dongle looks like "SX TX Pro" that we can find on aliexpress

My /bootloader/hekate_ipl.in is attached in txt format because I can't upload it in " .ini " . This is what is writing in it :
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp

 

[Plermpel]

Hi,
Just update my CFW to 16.0.0, I think I made a mistake and forgot to backup something there, now all my games are unused tickets, console shows they are not downloaded, is there any way to reinitialise the games or do I really need to reinstall 500Gig?

 

[Draxzelex]

Hi,
Just update my CFW to 16.0.0, I think I made a mistake and forgot to backup something there, now all my games are unused tickets, console shows they are not downloaded, is there any way to reinitialise the games or do I really need to reinstall 500Gig?

You don't need to backup anything when you update. You just have to make sure you update everything when you update. It sounds like you didn't update your patches which make sense as these needed to updated whenever your firmware or CFW change. You can download the latest patches from here