Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 6,003,289
  • Replies Replies 47,917
  • Likes Likes 66
DBI 504 released. It looks like it's back to normal, with an english version (not tested yet, but no r in the version number is a hint). Thank god the "crisis" is over. I'm not about to give up on my favorite homebrew for the Switch.

Tested. It works great! Posted in downloads.

(and I don’t have to scan w/ Google translate.)
 
My nintendo switch was automatically updated to version 16.0.0, I have autorcm activated and when today I went to play in emunand mode (atmosphere) the switch turned on directly and did not stay with the black screen as it normally does. It doesn't detect rcm on the tegra either. Is there a way to activate the autorcm again without using the jig?
First off, the Switch does not "automatically" update. It always the prompts the user if they want to update or not. Accidents do happen so lying won't get you anywhere. Secondly, there is no way to install RCM without hacking the console so you do need a jig.
 
  • Haha
Reactions: BigOnYa and impeeza
I have been having a couple issues after updating the CFW. The screen either goes yellow or I get this error. Any help would be appreciated on resolving this matter. I have done multiple things and attempted to resolve this issue in every way possible that I have seen. Starting from a fully clean SD card.
Upgrade or delete Tesla.

better yet, move/rename /atmosphere/contents/ to /atmosphere/contents.bk and reboot, and see if that fixes things for you.
Post automatically merged:

I don't have tesla or I don't have the file named tesla is that the ovlmenu OVL file?
Yes, you do. Look at the title ID in the error you posted.. It spells 7E51A (TESLA) in leet-speak.

A718189E-AEFD-4CA0-B6E4-CB493390AC11.jpeg


The files causing the problem are located in /atmosphere/contents

move/rename /atmosphere/contents to /atmosphere/contents.bk and reboot and you will know instantly.

if that works, you can restore and upgrade.

https://gbatemp.net/threads/updated-edizon-overlay-added-feature.603725/
 
Last edited by binkinator,
Check nogc and autonogc setting in Hekate and Atmosphere to enable/disable GC (Game Card)

Autonogc settings are set up in Hekate based on this doc:

Nogc setting are setup in Atmosphere based on this doc:
I found it that the Hekate Nogc setting was enabled but nothing in Atmosphere unless I'm doing it wrong. Now I get this when inserting a game...
 

Attachments

  • PXL_20230228_041653421.jpg
    PXL_20230228_041653421.jpg
    2.8 MB · Views: 77
Last edited by DaddyDingDong,
I found it that the Hekate Nogc setting was enabled but nothing in Atmosphere unless I'm doing it wrong. Now I get this when inserting a game...
So it’s booting without the game card inserted but crashes the instant you put in a GC? Is it any GC or just one in particular?

What firmware version is on your Sysnand and what version is on your Emunand?

e: I just re-read you OP…this happens in stock as well? Can you just let the system boot w/o hax and see if it will play that way?
 
Last edited by binkinator,
So it’s booting without the game card inserted but does the instant you put in a GC? Is it any GC or just one in particular?

What firmware version is on your Sysnand and what version is on your Emunand?

e: I just re-read you OP…this happens in stock as well? Can you just let the system boot w/o hax and see if it will play that way?
OFW 9.1.0 Hekate 6.0.2 Atmosphere 1.4.1
It will give the same error regardless of what I boot into. I bought this switch pre-modded (V1 no chip) and it appears they had the NOGC activated. If I update the switch to OFW to the latest firmware could that possibly cure it?

I just took off auto RCM mode and removed the SD card and to get it to boot normal and the picture is what I got.
 

Attachments

  • PXL_20230228_060351465.jpg
    PXL_20230228_060351465.jpg
    3.6 MB · Views: 80
Last edited by DaddyDingDong,
Whatthe fuck is this is it real

What the fuck is this it is it real


@Milenko knows:

https://gbatemp.net/threads/who-said-switch-gamecube-emulation-was-impossible.626870/

will he tell?

I’m thinking yes.
Post automatically merged:

OFW 9.1.0 Hekate 6.0.2 Atmosphere 1.4.1
It will give the same error regardless of what I boot into. I bought this switch pre-modded (V1 no chip) and it appears they had the NOGC activated. If I update the switch to OFW to the latest firmware could that possibly cure it?

I just took off auto RCM mode and removed the SD card and to get it to boot normal and the picture is what I got.
It could very well. The error you’re getting is sometimes related to the GC firmware level mismatch. It’s different than the Switch FW. GC has way fewer versions but I’m less familiar with the cut offs…mostly because with a hacked Switch, who needs game carts? ;-)

Here’s link for the various fuse level:

https://gbatemp.net/blogs/fuses-gc-fw-key-versions.19175/

If you’re too low you will have to update and again, I’m less familiar but I think the update is one way?
 
Last edited by binkinator,
@Milenko knows:



will he tell?

I’m thinking yes.
Post automatically merged:


It could very well. The error you’re getting is sometimes related to the GC firmware level mismatch. It’s different than the Switch FW. GC has way fewer versions but I’m less familiar with the cut offs…mostly because with a hacked Switch, who needs game carts? ;-)

Here’s link for the various fuse level:



If you’re too low you will have to update and again, I’m less familiar but I think the update is one way?
Just updated to OFW and now it reads games. wild stuff but thanks for the help.
 
  • Like
Reactions: binkinator
Absolutely, by the time a breaking FW on a cart gets to you, it’s high time to upgrade anyway. Nothing will be coming out with FW16 for many months and we’ve already got the majority of homebrew updated.
Hey again. I bought Kirby and the gamecard did work :)
Unfortunately, I was unable to find gamecard version of Metroid Prime Remaster. I am on a wait list at a local game store (Based in Iowa and Illinois).
 
  • Like
Reactions: binkinator
After I updated Atmosphere and the Fuuse file and did the injection it won't load it just shows the battery charging than a black screen I am freaking out and idk what to do I am on latest atmosphere but not latest switch update I was updating my atmosphere and fuse before I did system update if anyone can help will be appreciated
Post automatically merged:

Also the atmosphere logo that shows up flickers and turns red than disappears

Move/rename /atmosphere/contents to /atmosphere/contents.bk and reboot to see if that fixes you.
 
Hey folks is there a set of cheats for MH Rise Sunbreak that work with Edizon, can't seem to find a thread about it here but i might be looking it up wrong
 
howdy
wise dan (in progress) here
i have 2 interesting questions for now.
1. why is no bazar subforum here?
2. patron of this gbatemp forum is invited to explain the meaning of the ''gbatemp''. is it a word? is it a plane?
 
howdy
wise dan (in progress) here
i have 2 interesting questions for now.
1. why is no bazar subforum here?
12. patron of this gbatemp forum is invited to explain the meaning of the ''gbatemp''. is it a word? is it a plane?
What should be in this "bazar" subforum? xD
 

Site & Scene News

Popular threads in this forum