Hacking SWITCH NOOB PARADISE - Ask questions here

[binkinator]

My SD card is 512G and partition based NAND at 29G if I recall correctly.

View attachment 354621

Try creating a files based emummc and see if that fixes anything. Don’t change anything else. Just add files based emummc.

 

[SaionWi]

Hello Binkinator !
Thank you for your quick answer, I understand I will wait until the update is released.
For now I wish you a good day, and good luck to everyone working on it. You are doing an awesome work on this !

Thanks again ! <3

 

[binkinator]

Hello Binkinator !
Thank you for your quick answer, I understand I will wait until the update is released.
For now I wish you a good day, and good luck to everyone working on it. You are doing an awesome work on this !

Thanks again ! <3

Oh it’s certainly not me doing the work on this. SciresM and the Reswitched team are the ones that produce Atmosphere.

 

[ricky88]

Try creating a files based emummc and see if that fixes anything. Don’t change anything else. Just add files based emummc.

It deleted a few files and as per the guide I had to recopy atmosphere, fusee, etc. Only thing that changed is my emuMMC tab now shows Type as SD File, Base folder is SD00. It still displays Atmosphere logo for split second and black screen.

My HOS is showing up as 13.2.1 - 14.1.2 though. Does that mean I've got 2 operating systems? 1 SysNand the other EmuNand?

 

[binkinator]

It deleted a few files and as per the guide I had to recopy atmosphere, fusee, etc. Only thing that changed is my emuMMC tab now shows Type as SD File, Base folder is SD00. It still displays Atmosphere logo for split second and black screen.

Good deal. Thank you.

Let’s temporarily do the following…don’t skip anything or use files you already have.


1) download Atmosphere 1.4.1 zip file release and fusee.bin from here https://github.com/Atmosphere-NX/Atmosphere/releases
2) download Hekate 6.0.1 release from here: https://github.com/CTCaer/hekate/releases/tag/v6.0.1
3) temporarily move/rename /atmosphere to /atmosphere.bk
4) temporarily move/rename /bootloader to /bootloader.bk
5) unzip atmosphere.x.x.x.zip and hekat.x.x.x.zip to the root of your sdcard.
6) copy fusee.bin to /bootloader/payloads/fusee.bin
7) copy /bootloader.bk/hekate_ipl.ini to /bootloader/hekte_ipl.ini
8) reboot


e: are you on a Mac?

 

[Temaps]

What size SDCard are you using? 512G or higher perhaps?

128Go Sandisk Extreme (the one that is classified U3, it takes roughly 8-9 min to create the emuNAND).

If someone one day run into my messages : If you have a SD card in FAT32 and you want to put your games in a USB stick, there is no requirements on the USB stick, you can put a NSP > 4Go in the USB stick (obviously the USB stick should not be formatted to FAT32 in this case), then plut the usb stick in the usb port of the dock, put the switch in the dock open DBI and install from USB (even if the file is bigger than 4Go it will work, DBI is able to manage the installation of a game that is bigger than 4Go even if your SD card is FAT32).

 

[ricky88]

Good deal. Thank you.

Let’s temporarily do the following…don’t skip anything or use files you already have.


1) download Atmosphere 1.4.1 zip file release and fusee.bin from here https://github.com/Atmosphere-NX/Atmosphere/releases
2) download Hekate 6.0.1 release from here: https://github.com/CTCaer/hekate/releases/tag/v6.0.1
3) temporarily move/rename /atmosphere to /atmosphere.bk
4) temporarily move/rename /bootloader to /bootloader.bk
5) unzip atmosphere.x.x.x.zip and hekat.x.x.x.zip to the root of your sdcard.
6) copy fusee.bin to /bootloader/payloads/fusee.bin
7) copy /bootloader.bk/hekate_ipl.ini to /bootloader/hekte_ipl.ini
8) reboot


e: are you on a Mac?

Followed everything to the T. Other than the Hekate initial setup of date and time. It is still a black screen.
No, I am doing this on Windows.

 

[ss3kev]

Hi,

Have recently just modded my switch so I am very new to this. I was running my switch in [CFW - sysMMC] when I accidently clicked the update switch prompt. I cannot launch CFW - sysMMC and CFW - emuMMC anymore and I am giving the message unknown pkg1 version hos version not supported. I also cant launch via fusee.bin either I get the message
"A fatal error occured when running Fusee. Unable to identity package1! I have the latest atmophere and fuse files 1.4.1. Could updating the system caused a problem? Thanks in advance for anyones help.

Ps. I might not reply very fast due to work commitments but I will get back once I finish. Thanks



hekate_ipl.ini file.
[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[CFW - sysMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp

[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/icon_payload.bmp

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp

 

[Hayato213]

Hi,

Have recently just modded my switch so I am very new to this. I was running my switch in [CFW - sysMMC] when I accidently clicked the update switch prompt. I cannot launch CFW - sysMMC and CFW - emuMMC anymore and I am giving the message unknown pkg1 version hos version not supported. I also cant launch via fusee.bin either I get the message
"A fatal error occured when running Fusee. Unable to identity package1! I have the latest atmophere and fuse files 1.4.1. Could updating the system caused a problem? Thanks in advance for anyones help.

Ps. I might not reply very fast due to work commitments but I will get back once I finish. Thanks



hekate_ipl.ini file.
[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[CFW - sysMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp

[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/icon_payload.bmp

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp

What firmware you are on?

 

[ss3kev]

What firmware you are on?

Hi Thank you for getting back my switch current system version is 16.0.0.

 

[Hayato213]

Hi Thank you for getting back my switch current system version is 16.0.0.

Currently there is no CFW for firmware 16.0.0, wait a few days.

 

[ss3kev]

Currently there is no CFW for firmware 16.0.0, wait a few days.

Thank you so much!! Thought it was something I done

 

[albert1996]

Anyone having issues with Atmosphere 1.4.1 on switch? I updated it, changed the fusee to the one for 1.4.1, yet it still doesn't boot. Keep getting the "unable to find package1!" message even though the hekate.ipl is set to package3. Does it work for firmware 16.0.0?

 

[Hayato213]

Anyone having issues with Atmosphere 1.4.1 on switch? I updated it, changed the fusee to the one for 1.4.1, yet it still doesn't boot. Keep getting the "unable to find package1!" message even though the hekate.ipl is set to package3. Does it work for firmware 16.0.0?

Read post above, no CFW for 16.0.0 at the moment.

 

[albert1996]

oh! that answered my question! Thx!

 

[WiseDan]

@binkinator readed somewhere on gbatemp that you will open gamestore for switch.
please enlight us!

 

[engagelover]

You install them simply by downloading sigpatches then, you'll see a folder named atmosphere, simply drop the contents of this folder onto the atmosphere folder on your sd card. Tada! now you can play games.
Edit: you might need to overwrite some files while installing the sigpatches. That is normal and you should do so.

Can I do it using DBI MTP Responder seeing there is external SD card folder there?

 

[Hayato213]

Can I do it using DBI MTP Responder seeing there is external SD card folder there?

You can do that or use like FTP, just that you need to find the correct folder, after you update the sig patches, you need a restart to apply change.

 

[engagelover]

You can do that or use like FTP, just that you need to find the correct folder, after you update the sig patches, you need a restart to apply change.

Alright much appreciated, will try it soon after I have done clearing some backlog of game lol.

 

[binkinator]

@binkinator readed somewhere on gbatemp that you will open gamestore for switch.
please enlight us!

LOL. That's just for my own internal configuration of homebrew configs and such. I needed a way to "destroy" my Switch and recover quickly to a known working but fully customized state. Certainly not looking to get into the 'shop business. No time for that!

Post automatically merged: Feb 21, 2023

Followed everything to the T. Other than the Hekate initial setup of date and time. It is still a black screen.
No, I am doing this on Windows.

Very interesting. That is a completely new deployment w/ no tricks. How did you format your sdcard? exfat or fat32?