Hacking SWITCH NOOB PARADISE - Ask questions here

[binkinator]

Okay, this gets more strange:

Things that work:
When I start OFW, do nothing, power off, and jump to RCM->Hekate, it loads no problem.
When I start OFW, open Nintendo Switch Online, power off, and jump to RCM->Hekate, it loads no problem.
When I start OFW, open Minecraft to title, power off, and jump to RCM->Hekate, it loads no problem.
When I start OFW, open Minecraft load level, power off, and jump to RCM->Hekate, it loads no problem.
When I start OFW, open eShop, and jump to RCM->Hekate, it loads no problem.

Things that do NOT work:
When I start OFW, open Fortnite get into game lobby, power off, and jump to RCM->Hekate, it does NOT load

The work around is after I launch Hekate and the splash fades out to nothing, I then "power up+power" and jump to RCM. On the second injection, it loads Hekate with no issues.

I upgraded to "hekate v6.0.1 & Nyx v1.5.1" and it's the same issue. So this is not related to patches.ini after all, but clearly something is happening to the bootloader/sdcard. Is there a way to see a log of Hekate when it fails?

Nyx has a logging option. Go to Nyx setting in the lower left corner. Be sure to save changes.

Also might want to try a maintenance mode + reboot. You don’t want to change anything…just do steps 1 and 2 and then reboot. It’s been known to fix weird things on the Switch.

 

[Bunklung]

Nyx has a logging option. Go to Nyx setting in the lower left corner. Be sure to save changes.

Also might want to try a ..... + reboot. You don’t want to change anything…just do steps 1 and 2 and then reboot. It’s been known to fix weird things on the Switch.

I read somewhere that the logging is for HOS only. Does that seem to make sense?

I did boot direct to fusee.bin/Atmosphere (emuMMC) and I had no issues skipping Hekate. So it seems like an odd/old issue with Hekate. I read an old thread with the same fade out Hekate issues and some people said it's just kinda how it works sometimes. A few people saying you needed to make certain you were no plugged into a USB hub, which I am not.

Thanks for your help. I think I will deal with the workarounds for now. Happy Holidays and Happy New year.

 

[impeeza]

Any new switch REQUIRE a modchip, hwfly for oled is the one you need

 

[Lunatics]

Hey guys, I am looking for some help/advice with my friends switch. Previously had it hacked on SX OS, made the conversion to Atmosphere a couple months ago and everything was working. My friend went to use his Switch one day and Atmosphere would not boot and was giving some quick error message/screen when trying to boot emummc which I did not see.

I tried to update his Atmosphere folder, delete the contents folder, update sigpatches etc etc and nothing is working. All I am getting is after I select emuMMC, it shows me the Atmosphere screen/logo for a second and then everything goes black.

I believe his old Microsd was on its way out and may have corrupt the emummc. I tried a new microSD card and copied everything over and tried Atmosphere from scratch etc but the same issue happens.

Does anyone have any advice on how to recover this before I try to blow away the entire microsd card and rebuild everything from scratch? I am trying to save his existing emummc and saves etc however since the issue is carrying over to a new SD, I am afraid the emummc may be messed up since this issue keeps happening.

If anyone has ay suggestions or advice it would be greatly apreciated.

 

[dariosq]

Got my Switch recently and I tried to install a custom theme, but it showed up the 2162-0002 error. I managed to solve the problem, but I wanna know how do I install the custom themes properly

 

[binkinator]

Hey guys, I am looking for some help/advice with my friends switch. Previously had it hacked on SX OS, made the conversion to Atmosphere a couple months ago and everything was working. My friend went to use his Switch one day and Atmosphere would not boot and was giving some quick error message/screen when trying to boot emummc which I did not see.

I tried to update his Atmosphere folder, delete the contents folder, update sigpatches etc etc and nothing is working. All I am getting is after I select emuMMC, it shows me the Atmosphere screen/logo for a second and then everything goes black.

I believe his old Microsd was on its way out and may have corrupt the emummc. I tried a new microSD card and copied everything over and tried Atmosphere from scratch etc but the same issue happens.

Does anyone have any advice on how to recover this before I try to blow away the entire microsd card and rebuild everything from scratch? I am trying to save his existing emummc and saves etc however since the issue is carrying over to a new SD, I am afraid the emummc may be messed up since this issue keeps happening.

If anyone has ay suggestions or advice it would be greatly apreciated.

Please post the contents of your /bootloader/hekate_ipl.ini file.

You can check the SDCard with h2testw.

Post automatically merged: Dec 26, 2022

Got my Switch recently and I tried to install a custom theme, but it showed up the 2162-0002 error. I managed to solve the problem, but I wanna know how do I install the custom themes properly

NXThemesInstaller and Themezer are the goto apps for themes.

You would kick these off using Home Brew Menu app using title override or by clicking album but first we need to install them. I use the hbappstore.

here’s the HB AppStore app. https://github.com/fortheusers/hb-appstore

A short guide on how to get started with Themezer:

1. Download the NXThemesInstaller and (optionally) the Themezer homebrew app from the HB Appstore or manually copy them to your SDCard's /switch folder.
2. Launch the NXThemes Installer Homebrew app at least once and follow the steps.
3. You're now ready to browse themes directly on your Switch using the Themezer-NX homebrew app or by downloading nxthemes and copying them to the themes folder on your MicroSD!

 

[Lunatics]

Please post the contents of your /bootloader/hekate_ipl.ini file.

You can check the SDCard with h2testw.

[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0
[Atmosphere CFW]
payload=bootloader/payloads/fusee.bin
icon=bootloader/res/icon_payload.bmp
[Stock SysNAND]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp

I got this from the guide to migrate from SXOS to Atmosphere and is the same thing I use on my switch.

 

[binkinator]

[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0
[Atmosphere CFW]
payload=bootloader/payloads/fusee.bin
icon=bootloader/res/icon_payload.bmp
[Stock SysNAND]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp

I got this from the guide to migrate from SXOS to Atmosphere and is the same thing I use on my switch.

Everything looks good. Have you upgraded Hekate and downloaded the latest fusee.bin and placed it in /bootloader/payloads/

 

[Lunatics]

Everything looks good. Have you upgraded Hekate and downloaded the latest fusee.bin and placed it in /bootloader/payloads/

Yes I have deleted everything and started from complete scratch minus the emummc folder I copied from the old microsd card.

 

[binkinator]

Yes I have deleted everything and started from complete scratch minus the emummc folder I copied from the old microsd card.

E: are you using files based or partition based emunand?

Might as well try with a new emummc and see if you can get anything running at all. I believe we’re both looking at this, correct?

https://rentry.org/SwitchHackingIsEasy (if not, take a look and see if there’s anything you missed.)

 

[NitroHedgehog]

I have a similar problem here... when I updated Atmosphere, Hekate, then boot into CFW, the Nintendo Switch logo stays for a whole minute, and I can't play any games, even retail-carts because they become ''corrupted''. The only way to access HomeBrew Menu is to go to the album. And if you are asking, there are NO pirated/warez stuff on my Switch, so don't ask me about .ncp or other dumps...

Here is my hekate_ipl.ini contents -

[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/icon_payload.bmp

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp




Something wrong? I dunno what to do...

 

[tictacmentosmint]

How do I do emunand on the switch?

 

[SylverReZ]

How do I do emunand on the switch?

https://nh-server.github.io/switch-guide/user_guide/emummc/making_emummc/

 

[binkinator]

I have a similar problem here... when I updated Atmosphere, Hekate, then boot into CFW, the Nintendo Switch logo stays for a whole minute, and I can't play any games, even retail-carts because they become ''corrupted''. The only way to access HomeBrew Menu is to go to the album. And if you are asking, there are NO pirated/warez stuff on my Switch, so don't ask me about .ncp or other dumps...

Here is my hekate_ipl.ini contents -

[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/icon_payload.bmp

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp




Something wrong? I dunno what to do...

Are you injecting Hekate.x.x.x.bin or Fusee.bin?

Did you update your Sigpatches?

Try temporarily moving /atmosphere/contents to /atmosphere/contents.bk and reboot to see if you have incompatible sys-modules that require updating as well.

These t-shooting steps might help as well: https://gbatemp.net/threads/how-to-fix-switch-games-not-booting-after-a-fw-cfw-update.563960/

 

[yukumo06]

hi! can someone help me with this. i tried upgrading my SD card then i follow the steps where my emunand type is SD file so i just have to format my memory card to Fat32 then copy the content of my old SD to my new SD. then every time i tried to boot to atmosphere im getting this error.

 

[NitroHedgehog]

Are you injecting Hekate.x.x.x.bin or Fusee.bin?

Did you update your Sigpatches?

Try temporarily moving /atmosphere/contents to /atmosphere/contents.bk and reboot to see if you have incompatible sys-modules that require updating as well.

These t-shooting steps might help as well: https://gbatemp.net/threads/how-to-fix-switch-games-not-booting-after-a-fw-cfw-update.563960/

I inject Hekate.bin but have no SigPatches due to the lack of tutorials AND thinking they only were used for pirated games... maybe that's why. I'll test it ASAP to see if things change.

EDIT - Now most things work, but CFW is INCREDIBLY SLOW. Console is lagging when starting a game, can take up to 30 seconds to view profile, system data, etc... And I use Hekate 6.0.1.bin, by the way.

 

[binkinator]

I inject Hekate.bin but have no SigPatches due to the lack of tutorials AND thinking they only were used for pirated games... maybe that's why. I'll test it ASAP to see if things change.

EDIT - Now most things work, but CFW is INCREDIBLY SLOW. Console is lagging when starting a game, can take up to 30 seconds to view profile, system data, etc... And I use Hekate 6.0.1.bin, by the way.

Great. So we got the software working but it seems there’s something causing slowness. Let’s check the SDCard and make sure it;s still performing.

On your Switch, in Hekate, please show the SDCard information and the results of a benchmark test of your sdcard.





On your PC, please run h2testw on your SDCard and post the results.

Post automatically merged: Dec 27, 2022

hi! can someone help me with this. i tried upgrading my SD card then i follow the steps where my emunand type is SD file so i just have to format my memory card to Fat32 then copy the content of my old SD to my new SD. then every time i tried to boot to atmosphere im getting this error.

Please share your /bootloader/hekate_ipl.ini file and if you are injecting using RCM or using a modchip.

 

[NitroHedgehog]

Great. So we got the software working but it seems there’s something causing slowness. Let’s check the SDCard and make sure it;s still performing.

On your Switch, in Hekate, please show the SDCard information and the results of a benchmark test of your sdcard.
View attachment 344591

View attachment 344592


On your PC, please run h2testw on your SDCard and post the results.

Post automatically merged: Dec 27, 2022

Please share your /bootloader/hekate_ipl.ini file and if you are injecting using RCM or using a modchip.

There you go. Was I doing something wrong, especially on partitioning the SD Card with only 7GB for EmuNand(EmuMMC)? As for H2Testw, I'll edit this post later with the results.

 

[binkinator]

There you go. Was I doing something wrong, especially on partitioning the SD Card with only 7GB for EmuNand(EmuMMC)? As for H2Testw, I'll edit this post later with the results.

Your SDCard looks good except for that tiny partition. Unless you went out of your way to shrink you emunand partition, it should be 29G x1 FULL.

Check out this guide for more details: https://rentry.org/SwitchHackingIsEasy

 

[Livebythecoin]

Can anyone help? I’m following the idiots guide and checking if my switch is vulnerable to fusee-gelee, but upon injecting the payload 3 error messages come up:

(ERROR) uSD: failed to configure controller!

(ERROR) uSD: failed to initialise the SDMMC Driver!

(ERROR) Fatal error: Failed to initialise the SD Card!

The tegrarcmgui says “smashed the stack with a 0x7000 byte SETUP and that it was successfully injected.

The console has been used as a hacked console before using SXOS and I still have the SD card with all the games on, but since my ex partner put a normal game in and updated the system firmware it hasn’t worked. Spent hours trying to work out what I needed to tweak with no luck, so thought I’d just start again.

Any help appreciated