Hacking SWITCH NOOB PARADISE - Ask questions here

[HelloShitty]

Hi.
I'm still trying to understand what this nut is doing when we click on "Organize files".
I have Bayonetta 3 already installed but in the scanned folder, if I put there the .xci file, it gets moved from the scanned folder to the folder ./nut/titles/duplicate. However, the same is not happening to other games I have installed and also ave their (in this case) .nsp files in the scanned folder.

So, my question is why is only my Bayonetta 3 xci file being moved into ./nut/titles/duplicate and not the .nsp files of other games I have also installed in the console?

 

[Lamcza]

oh no iam stuck at 0% preparing update perhaps i schould select just fat option? :X
can i reboot it now :x?

Lol ok nevermind it went from long time at 0% to 100% xD so it is still going

 

[veggav]

Hey, what tool can I use to automatically rename a NSP or NSZ file to Game Title [Title ID] [version] ?

specially that can do batch work and even better if it's for linux

 

[Lamcza]

Look up that Darthsternie Firmware guy and then use daybreak.nro to upgrade your FW to 15.0.1 FW and see if that helps. Everything else looks good.

Post automatically merged: Dec 4, 2022

This is for the new card.

You will have to copy the FAT32 data from your original card to the newly formatted card again.

Post automatically merged: Dec 4, 2022

Are you using the lates 15.0.0 compatible version of tegraexplorer?
https://github.com/suchmememanyskill/TegraExplorer/releases

Is your SDCard formatted as exfat or fat32?

What brand is your SDCard and how much did you pay for it?

Might be worth testing your card with h2testw
https://3ds.hacks.guide/h2testw-(windows).html

Look up that Darthsternie Firmware guy and then use daybreak.nro to upgrade your FW to 15.0.1 FW. Easier than dumping. Same result.

Ehh xD still nothing iam now on 15.1. Sys overley even pop when swicth ask for controlers confirmation so it works everywhere besides a game in dock
hmm plus now i cant boot to just emmmc by hekate it is stucking on blackscreen after nintendo logo but by fusee there is no problemo perhaps it is the config thing ?

 

[Reoseb]

Hello all

sorry if it's already been asked but how do you actually use cheats with aio-switch-updater plz ?

I installed the cheats correctly and I can see them in the list. But there is no option to activate them.
I tried to launch aiosu both via applet and album button, it says : 'restart via redirection method'.
Nothing in Tesla either.

Thanks for your help

 

[binkinator]

Hey, what tool can I use to automatically rename a NSP or NSZ file to Game Title [Title ID] [version] ?

specially that can do batch work and even better if it's for linux

Look at nspindexer. It does a pretty good job.

https://github.com/proconsule/nspindexer

Post automatically merged: Dec 4, 2022

Ehh xD still nothing iam now on 15.1. Sys overley even pop when swicth ask for controlers confirmation so it works everywhere besides a game in dock

Yikes, man. I’m not sure then. Perhaps remove all the Tesla stack and reinstall from scratch. Very odd though that it works everywhere but dock…so I’m not confident that will fix anything,

 

[97shadow]

Hola a todos alguien sabe cómo usar lan play desde un dispositivo Android con root?
Solo me aparecen las salas pero no me deja entrar a las salas (
Hello everyone, does anyone know how to use lan play from a rooted Android device?

Only the rooms appear but it does not let me enter the rooms) thanks gracias

 

[impeeza]

Using the search function at top of page and reading the instructions:
https://gbatemp.net/threads/building-a-switch-lan-play-client-on-your-android-phone.522535/
https://gbatemp.net/threads/official-switch-lan-play.520912/page-15#post-10013876

and do not forget read:

https://gbatemp.net/help/terms/

 

[binkinator]

But how do I make the annoying message (that says to update) to end?

Screenshot of the error please…

Post automatically merged: Dec 4, 2022

Hello all

sorry if it's already been asked but how do you actually use cheats with aio-switch-updater plz ?

I installed the cheats correctly and I can see them in the list. But there is no option to activate them.
I tried to launch aiosu both via applet and album button, it says : 'restart via redirection method'.
Nothing in Tesla either.

Thanks for your help

Redirection mode is also called title override. Title override means to hold down the (R)ight shoulder button while clicking a game title…keep holding it down until you see hbmenu. Once inside hbmenu the red “Applet” warning will be gone and you can continue your work.

 

[h00die]

It will take a bit to confirm a large card like that but in general FAT32 and Samsung are a good mix. Let’s see what h2testw says.

E: I the mean time do you have another 64G+ SDCard we can do some tests with?

Post automatically merged: Dec 4, 2022

So I checked it, its a 128 GB Samsung Evo Plus. I ran h2testw on one partition on my sd card (the one where I install atmosphere and nro's etc.) and it returned an error immediately on startup.

I can scrounge up another sd card for testing, yes.

 

[impeeza]

So I checked it, its a 128 GB Samsung Evo Plus. I ran h2testw on one partition on my sd card (the one where I install atmosphere and nro's etc.) and it returned an error immediately on startup.

I can scrounge up another sd card for testing, yes.

Bad news mate, you have a bad card (or reader)

 

[h00die]

Bad news mate, you have a bad card (or reader)

Alright well if there's nothing I can do I may as well replace the card. Is there a list of good cards somewhere I can use as reference?

Also if I take a backups of the raw, boot0 and boot1 of this sd card in the state that its in now (i have already made a backup of them inbetween testing stuff with it) and move it to a new sd card, would that work/is that worth trying?

Edit: hmm, it seems i can't write to it. Creating a blank txt document returned this. Should i try chkdsk?

 

[veggav]

Look at nspindexer. It does a pretty good job.

https://github.com/proconsule/nspindexer

The problem is that it needs at least the Title ID, I was hopping something that might be able to extract the Title ID from the NSP and rename it.

 

[impeeza]

The problem is that it needs at least the Title ID, I was hopping something that might be able to extract the Title ID from the NSP and rename it.

you are looking for NxFileViewer have a tool for renaming files on a folder.

 

[veggav]

you are looking for NxFileViewer have a tool for renaming files on a folder.

That's it! thanks man!

 

[SylverReZ]

Alright well if there's nothing I can do I may as well replace the card. Is there a list of good cards somewhere I can use as reference?

Also if I take a backups of the raw, boot0 and boot1 of this sd card in the state that its in now (i have already made a backup of them inbetween testing stuff with it) and move it to a new sd card, would that work/is that worth trying?

Edit: hmm, it seems i can't write to it. Creating a blank txt document returned this. Should i try chkdsk?

You might have gotten a fake Samsung card. You can tell if this is the case if the card does not have white edges around it.

 

[h00die]

You might have gotten a fake Samsung card. You can tell if this is the case if the card does not have white edges around it.

I bought it at a local and very popular technology store here in Australia in order to avoid that

 

[SylverReZ]

I bought it at a local and very popular technology store here in Australia in order to avoid that

I do the same as well.

 

[binkinator]

The problem is that it needs at least the Title ID, I was hopping something that might be able to extract the Title ID from the NSP and rename it.

E: Try the app @impeeza suggested. I think it’s better suited for what you’re trying to do.

————————————-
Nspindexer does in fact look inside the file and extract the data and change the file name to match. Automatically renaming tons of random NSPs and XCIs is exactly what I use it for.

 

[Lamcza]

Look at nspindexer. It does a pretty good job.

https://github.com/proconsule/nspindexer

Post automatically merged: Dec 4, 2022

Yikes, man. I’m not sure then. Perhaps remove all the Tesla stack and reinstall from scratch. Very odd though that it works everywhere but dock…so I’m not confident that will fix anything,

Heh i just update and swap all atmo and hekate files on sd xD just to find out that tesla will not work in dock when screen size is scaled down from 100% but now i know :X