Zombie thread, RAAAGH

[CIAwesome526]

While we're talking of flash carts, do you know if you can run the MT Launcher via a GW cart? I don't see why it wouldn't be possible, but I can't test it until my OG3DS comes in...

you launch it in the browser, no cart needed

 

[gamesquest1]

While we're talking of flash carts, do you know if you can run the MT Launcher via a GW cart? I don't see why it wouldn't be possible, but I can't test it until my OG3DS comes in...

nope you can't, you can run the MT launcher without a MT card though for classic mode, but you can only use each respective clone on their appropriate FW, apart from orange3ds,R4 DE, and 3DS link which where all just rebadged cards, also the MT launcher can only be launched via the MSET exploit (the 4.x NDS profile exploit)

 

[CIAwesome526]

nope you can't, you can run the MT launcher without a MT card though for classic mode, but you can only use each respective clone on their appropriate FW, apart from orange3ds,R4 DE, and 3DS link which where all just rebadged cards, also the MT launcher can only be launched via the MSET exploit (the 4.x NDS profile exploit)

why cant i run gateway software on the R4 clone?

 

[Kirbs]

well by the look of things, they will.
They already dumped a NAND backup for a N3DS and they also showed a video in which one of the hackers ran a CFW (possibly emuNAND).
So yeah, they might be beating them to it.

Too bad KARL3DS is not open source in order to unlock the full capabilities like the wii did.

 

[gamesquest1]

inb4 gateway release their new exploit which is just activating a single rom sky3ds mode update that allows people to exploit the n3DS with a copy of cubic ninja

 

[ShadowOne333]

why cant i run gateway software on the R4 clone?

Why can't you run a Belkin Driver with a SanDisk hardware?
I think that pretty much answers your question.

The code is specific to the card's hardware.

 

[_eyCaRambA_]

inb4 gateway release their new exploit which is just activating a single rom sky3ds mode update that allows people to exploit the n3DS with a copy of cubic ninja

I'd be okay with that lol

 

[guitarheroknight]

inb4 gateway release their new exploit which is just activating a single rom sky3ds mode update that allows people to exploit the n3DS with a copy of cubic ninja

Didnt Smea said something about not being possible to gain kernel access with Ninjhax? I remember there was a whole fuss about it on Twitter and such, I guess someone was "wrong"...

All in all my theory is that GW initially showed a elevated Ninjhax on the video with full kernel access. But you never know...

 

[weatMod]

inb4 gateway release their new exploit which is just activating a single rom sky3ds mode update that allows people to exploit the n3DS with a copy of cubic ninja

well that is not a bad idea actually the only problems would be this

1)can the FPGA be reprogrammed to act as a sky 1:1 clone card and then be flashed back to red card functionality

2} GW would have to tell their customers they need to use an old exploitable 3ds to run the GW menu and flash the FPGA or find a copy of CN

id be ok with the 1st option since i still have my old 3ds and old xl

i also have a sealed copy of CN but it's US and my N3ds is AU

 

[2Hack]

well that is not a bad idea actually the only problems would be this

1)can the FPGA be reprogrammed to act as a sly 1:1 clone card and then be flashed back to red card functionality

2} GW would have to tell their customers they need to use an old exploitable 3ds to run the W menu and flash the FPGA or find a copy of CN

id be ok with the 1st option since i still have my old 3ds and old xl

i also have a sealed copy of CN but it's US and my N3ds is AU

Use KARL3DS to run regionfree, and install it

 

[gamesquest1]

Didnt Smea said something about not being possible to gain kernel access with Ninjhax? I remember there was a whole fuss about it on Twitter and such, I guess someone was "wrong"...

All in all my theory is that GW initially showed a elevated Ninjhax on the video with full kernel access. But you never know...

look at karl3ds....basically ninjhax couldnt get full control on itself, but combined with gateway exploits from GW ultra, ninjhax is a ready made entry point

 

[weatMod]

Didnt Smea said something about not being possible to gain kernel access with Ninjhax? I remember there was a whole fuss about it on Twitter and such, I guess someone was "wrong"...

All in all my theory is that GW initially showed a elevated Ninjhax on the video with full kernel access. But you never know...

because its a multiple exploits GW would supply their second part ,second stage exploit the CN could just be used for the entry point, GW's mii maker entrypoint and CN entrypoint are probably almost totally the same but CN would not break mii maker

 

[weatMod]

Use KARL3DS to run regionfree, and install it

i havent been following the project that closely but i assume it doesnt work on N3ds yet but will "SOON"' right

 

[CIAwesome526]

Why can't you run a Belkin Driver with a SanDisk hardware?
I think that pretty much answers your question.

The code is specific to the card's hardware.

yeah, but arnt they the same cards, just "different"

 

[alepman90]

Is it out yet?

 

[gamesquest1]

well that is not a bad idea actually the only problems would be this

1)can the FPGA be reprogrammed to act as a sly 1:1 clone card and then be flashed back to red card functionality

2} GW would have to tell their customers they need to use an old exploitable 3ds to run the W menu and flash the FPGA or find a copy of CN

id be ok with the 1st option since i still have my old 3ds and old xl

i also have a sealed copy of CN but it's US and my N3ds is AU

well i have no idea if they could manage to fit a 1:1 cart emulation routine into the FPGA and their existing code too....but supposing they could, they should be able to have people put cubic ninja on the SD with the name boot.3DS or whatever, then when the gateway card is inserted always use boot.3ds as the 1:1 game and then that can be used to enter gateway mode, once in gateway mode just auto switch back to gateway card mode

 

[CIAwesome526]

if i had a 4.5 3DS, could i use the gateway blue card to launch the R4 launcher.dat?

 

[gamesquest1]

if i had a 4.5 3DS, could i use the gateway blue card to launch the R4 launcher.dat?

why would you want to, it has zero functionality without a R4 DE, you could load it up but it wouldnt really do anything without the card, MT launcher is atleast a bit useful, it allows 9.x emunand (although its buggy with 9.5) and plays 7.0 encrypted games even if you dont own a MT card

 

[weatMod]

well i have no idea if they could manage to fit a 1:1 cart emulation routine into the FPGA and their existing code too....but supposing they could, they should be able to have people put cubic ninja on the SD with the name boot.3DS or whatever, then when the gateway card is inserted always use boot.3ds as the 1:1 game and then that can be used to enter gateway mode, once in gateway mode just auto switch back to gateway card mode

well existing customers would still need an old exploitable console either way to update the FPGA
if both modes dont fit at once then they could just have you reflash the FPGA on the red card to work as a sky, then you install the exploit which only has to be installed once,
then flash the red card back to its normal ultra mode

funny because after we flashed the card to get the multirom update they said there was no going back to the single rom mode, the FPGA could only be updated and not downgraded

but then when ultra came out you could hold R trigger and get a menu to downrade the FPGA back to omega

i am guessing they just didn bother to put it in with the multirom update but that it was probably physically possible

 

[gamesquest1]

well existing customers would still need an old exploitable console either way to update the FPGA
if both modes dont fit at once then they could just have you reflash the FPGA on the red card to work as a sky, then you install the exploit which only has to be installed once,
then flash the red card back to its normal omega mode

funny because after we flashed the card to get the multirom update they said there was no going back to the single rom mode, the FPGA could only be updated and not downgraded

but then when omega came out you could hold R trigger and get a menu to downrade the FPGA back

i am guessing they just didn bother to put it in with the multirom update but that it was probably physically possible

well cubic ninja would most likely have to be run each time you want to enter gateway mode, so it would have to both fit in or you would be tethered to FPGA flashing with a exploitable console.......i don't think finding an exploitable console to update the FPGA would be that major an issue for the majority of people(as long as its a one time thing).....better than no update at all