After a long drought in any new Xbox 360 mod hardware, a proper hybrid programmer from Element18592 is out now. Claiming support for all Xbox 360 consoles, this is a swiss army knife for any enthusiast. Supporting all NAND sizes natively and read/write speeds up to 3x it's ancestor, the NAND-X, along with the bonus of having the ability to flash glitch chips for tuning your RGH on the same board. It's not changing the state of homebrew on the system - but it makes improvements for a one time hack or a shop owner that's a nice proposal for anyone diving into Xbox 360 homebrew 15 years later.​

​

The Xflasher 360 is THE FIRST all-in-one Xbox 360 Nand reading/writing and glitch chip programming device.

It can read small block and big block phats, Trinity and Corona 16mb nands, AND the 4gb nands on some Corona consoles!​

It works natively with Jrunner and is a drop-in replacement for any tutorial you're following that uses a JR-Programmer or a Nand-X.​

Features:​

-Twice as fast as the NAND-X
-An all in one design compatible with every Xbox 360 motherboard
-Easily toggle between SPI and eMMC mode with the flip of a switch
-Reads/writes 4GB NANDs in 5 seconds
-Reads/writes 16MB NANDs in under 50 seconds
-No more single use 4GB QSB's
-Native integration with the J-Runner with Extras software
-Flashing compatibility for all Xilinx based glitch chips including the Ace V3, Coolrunner, Matrix, etc
-Native Windows x64 drivers, no more hassling with unsigned drivers​

You can purchase the xFlasher 360 from resellers from The Mod Shop https://themodshop.co/shop/xflasher​

​

 

[DinohScene]

The native 64 bit drivers alone make it worth it.
Sweet, might pick one up very soon!

 

[Deleted member 668561]

no more fucking vm, until M$ decides to block drivers from installing

 

[tech3475]

Any good for Xenon? I have a banned one lying around and don’t care about RROD risk.

 

[Viri]

I guess time to take my Xbox 360 that my sister "borrowed" for a year+ back! This looks like a fun project.

I tried Googling it, but couldn't find an answer. But, can an Xbox Series X controller work on an Xbox 360? If not, is there an adapter?

 

[HollowGrams]

View attachment 270628
​

After a long drought in any new Xbox 360 mod hardware, a proper hybrid programmer from Element18592 is out now. Claiming support for all Xbox 360 consoles, this is a swiss army knife for any enthusiast. Supporting all NAND sizes natively and read/write speeds up to 3x it's ancestor, the NAND-X, along with the bonus of having the ability to flash glitch chips for tuning your RGH on the same board. It's not changing the state of homebrew on the system - but it makes improvements for a one time hack or a shop owner that's a nice proposal for anyone diving into Xbox 360 homebrew 15 years later.​

​

​

You can purchase the xFlasher 360 from resellers from The Mod Shop https://themodshop.co/shop/xflasher​

​

Winchester possible now without reball'N? That would be a no.

 

[lisreal2401]

Not for glitching, can still read/write NAND on win

Can change your fans speeds?

 

[HollowGrams]

Not for glitching, can still read/write NAND on win

Can change your fans speeds?

Yeah, title is misleading since it aint in AIO if ALL isnt possible. All good, win demand is super low ne-wayz.

 

[chrisrlink]

Winchester possible now without reball'N? That would be a no.

yeah rgh doesn't work at all with winchester it was patched in that rev. I'm sure the one's security measures were copied over too making it impossible to crack

 

[HollowGrams]

yeah rgh doesn't work at all with winchester it was patched in that rev. I'm sure the one's security measures were copied over too making it impossible to crack

Winchester is rgh possible with reballing and re-viving post out. Its been done. Not to practical I guess.

 

[chrisrlink]

but i heard the brick rate is high with doing so

 

[DinohScene]

Winchester is rgh possible with reballing and re-viving post out. Its been done. Not to practical I guess.

True but not worth it nor practical for your avarage end user.

 

[Octal450]

natively with Jrunner

Native support is ONLY with my custom J-Runner with Extras software.

We wrote a custom DLL in order for this to work. I spent many months ensuring the integration is as seamless as possible.

Kind Regards,
Josh

 

[HollowGrams]

but i heard the brick rate is high with doing so

No bricks if you know how to reball. Its the same hardware/security with post out hidden under xcgpu.

--------------------- MERGED ---------------------------

Just pointing out that it will work natively ONLY with my custom J-Runner with Extras software. We wrote a custom DLL based off Squirter in order for this to work. I spent many months ensuring the integration is as seamless as possible.

Kind Regards,
Josh

I'm going to be picking one of these up as I still RGH many many systems for people. Thank you to all involved.

 

[Octal450]

Winchester is rgh possible with reballing and re-viving post out. Its been done. Not to practical I guess.

That is not true. POST_OUT is blocked when fuses are blown at the factory, and CPU Reset is filtered. Even if you get a zero'd CPU with POST_OUT enabled, you can't reset glitch the CPU (its been tried). A long enough pulse to bypass the filter resets the CPU cleanly. So "RGH" itself won't work anymore -> but other glitching methods still may.... and that is something I plan to look into should a zero'd Winch CPU ever land in my hands.

Kind Regards,
Josh

 

[Darth Meteos]

Finally, I can hack an Xbox 360. Looking forward to it.

 

[StrayGuitarist]

I tried Googling it, but couldn't find an answer. But, can an Xbox Series X controller work on an Xbox 360? If not, is there an adapter?

Natively, no. There is an adapter, though, that I use frequently. The Brook Wingman XB. I use it to play Xbox 360 stuff with an Xbox One controller, but it also supports the Series X controllers.

 

[HollowGrams]

That is not true. POST_OUT is blocked when fuses are blown at the factory, and CPU Reset is filtered. Even if you get a zero'd CPU with POST_OUT enabled, you can't reset glitch the CPU (its been tried). A long enough pulse to bypass the filter resets the CPU cleanly. So "RGH" itself won't work anymore -> but other glitching methods still may.... and that is something I plan to look into should a zero'd Winch CPU ever land in my hands.

Kind Regards,
Josh

Was done by Russian hacker years ago.

 

[Deleted member 546149]

So it makes glitches?

 

[Octal450]

If you mean 15432, he didn't get RGH working.

They put a zero CPU on and soldered post manually to the balls. They got POST activity but could not glitch the machine.
They did launch freeboot via DEVGL though, which uses no chip, you can see it in YouTube, I can't send links here, but if you search YouTube for 0 fuse Slim you will see it.

Kind Regards,
Josh