Hacking xbox rgh jtag help

[GoldenGun13]

So i am not that good when it comes with the x360 but i do want to mod it rgh or jtag would do fine and so i came here since i know a lot of people are probably gonna know this
My x360:
Corona v1
dash 2.0.17526.0
no soft or hard mods done, quite new
probably has a faulty laser since 1/6 of the times it doesn't want to read my disks
does anyone know a good way to mod it i have fairly good soldering skills and equipment, so i just want to know what is the essentials to buy to mod it.
if you are wondering why its because i want to make it run emulators

 

[GoldenGun13]

oh also im from the uk so uk prices are best

 

[DinohScene]

You'll need a JR Programmer and a Ace360 V3.
That's pretty much it haha.

 

[GoldenGun13]

found them (master drawing skills for the second one)

 

[DinohScene]

Post fix isn't needed for Corona V1 nope.

 

[GoldenGun13]

will update you when they arrive, oh also what program do i use with the programmer

 

[DinohScene]

JRunner.
It basically does everything you'll need to get it to work.

 

[GoldenGun13]

question 1. does the console have to be powered on like on the character select screen and if so after i use the program to write the thing to the console do i just restart and boom its applied.
2. after writing to the console do i have to leave the chip installed in the console or take it out

 

[DinohScene]

It only needs to be plugged in.
Do not power it on, it can and will fry your NAND dumper.

Yes, glitchchip needs to stay in at all times.

 

[GoldenGun13]

post fix needed? just want to make sure

 

[DinohScene]

Corona v1 doesn't need postfix nope.

 

[GoldenGun13]

question i saw in a video the person just wired the nand-x straight to the xbox with no chip is that possible?
he does have a corona 16mb version

 

[DinohScene]

You can wire up the NAND-X without the QSBs yes.
It works on all 16 MB NANDs (consoles that came with harddrives)

 

[GoldenGun13]

can you use it to write to the console because if yes then why would you need a chip

 

[GoldenGun13]

tho he only used it to read and not write
link ""

 

[GoldenGun13]

can you use it to write to the console because if yes then why would you need a chip

i'm writing this because my console has a 250 GB original Microsoft HDD installed (most likely from factory)

 

[DinohScene]

You need the glitch chip to boot into the hacked state.
It has to stay in at all times.

You can remove the NAND wires later on.

 

[GoldenGun13]

do you have a tutorial like on youtube for my type of console since i want to know wht files i need since i want free style dash on it would i need xexmenu and dash launch to get the launcher on it

 

[DinohScene]

https://gbatemp.net/threads/setting-up-freestyle-dash.350470/

The tut you need to install FSD.

 

[GoldenGun13]

In order to mod the console is it sufficient to just solder the chip onto the motherboard?
or do i need to program it

Edit:
luckily i found a fairly noob friendly on how to do this but i wont post the link since it might count as advertising and don't feel like getting a ban or warn

 

[DinohScene]

You need to dump the NAND and solder in the chip.
Then write a EEC file back to obtain your CPU keys to create a hacked NAND.

That's basically the gist of it.
JRunner will help you go through it with ease.

 

[GoldenGun13]

write the ECC to the chip?

Also is this like your job since you are on way too much

 

[DinohScene]

Yes, after you've dumped the NAND, you'll need to create an ECC file and write that back.
By booting the 360 and the chip soldered properly, it'll display your fusesets and CPU key.
Write it down to create a hacked NAND which can be written back to the console again.

After that, you can pop in a XeXMenu disc or extract it all to a flash drive.
Load it up and install FSD.