Wii & USB Loader GX

Discussion in 'Wii - Backup Loaders' started by Haemogoblin, Apr 3, 2015.

  1. Haemogoblin
    OP

    Haemogoblin Newbie

    Newcomer
    5
    0
    Apr 3, 2015
    Hi there guys

    I'm relatively new to soft modding my Wii and I've hit something of a snag. I've tried to play Mario Kart on my Wii but when I select the game on the menu. The screen will go blank for a few seconds before throwing me back in to the Homebrew Channel.

    Following this guide and one I found on Youtube, I used Custom IOS installer to install to slot IOS36. I found another user on this board had similair problems to me and was told to installed to slot 249/250. I've tried doing this, but it gives me an error ret 1035.

    Would really appreaciate some help :)

    Here is a sysinfo

    sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
    ...runs on IOS58 (rev 6176).

    Region: PAL
    System Menu 4.3E (v514)

    Drive date: 2006.09.07
    Homebrew Channel 1.1.2 running on IOS58
    HomebrewFilter ist nicht installiert
    Hollywood v0x11
    Console ID: 36650574
    Boot2 v4
    Found 76 titles.
    Found 46 IOS on this console. 17 of them are stub.

    IOS4 (rev 65280): Stub
    IOS9 (rev 1034): No Patches
    IOS10 (rev 768): Stub
    IOS11 (rev 256): Stub
    IOS12 (rev 526): No Patches
    IOS13 (rev 1032): No Patches
    IOS14 (rev 1032): No Patches
    IOS15 (rev 1032): No Patches
    IOS16 (rev 512): Stub
    IOS17 (rev 1032): No Patches
    IOS20 (rev 256): Stub
    IOS21 (rev 1039): No Patches
    IOS22 (rev 1294): No Patches
    IOS28 (rev 1807): No Patches
    IOS30 (rev 2816): Stub
    IOS31 (rev 3608): No Patches
    IOS33 (rev 3608): No Patches
    IOS34 (rev 3608): No Patches
    IOS35 (rev 3608): No Patches
    IOS36 (rev 3351): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 5663): No Patches
    IOS38 (rev 4124): No Patches
    IOS40 (rev 3072): Stub
    IOS41 (rev 3607): No Patches
    IOS43 (rev 3607): No Patches
    IOS45 (rev 3607): No Patches
    IOS46 (rev 3607): No Patches
    IOS48 (rev 4124): No Patches
    IOS50 (rev 5120): Stub
    IOS51 (rev 4864): Stub
    IOS52 (rev 5888): Stub
    IOS53 (rev 5663): No Patches
    IOS55 (rev 5663): No Patches
    IOS56 (rev 5662): No Patches
    IOS57 (rev 5919): No Patches
    IOS58 (rev 6176): USB 2.0
    IOS60 (rev 6400): Stub
    IOS61 (rev 5662): No Patches
    IOS62 (rev 6430): No Patches
    IOS70 (rev 6912): Stub
    IOS80 (rev 6944): No Patches
    IOS222 (rev 65280): Stub
    IOS223 (rev 65280): Stub
    IOS249 (rev 65280): Stub
    IOS250 (rev 65280): Stub
    IOS254 (rev 65280): Stub
    BC v6
    MIOS v10

    Report generated on 2015/04/03.
     
  2. TecXero

    TecXero Technovert

    Member
    2,814
    909
    Apr 13, 2014
    United States
    Mainframe
    D2x will probably be closer to what you're looking for, it's a lot simpler to set up. v10 Beta 52 or v8 Final should work fine. Here's a starting point. The guide on there is a bit old, but should work. Just make sure you're using either v10 or v8, instead of the version the guide recommends. You need to use a cIOS that will allow USB access, which d2x allows.
     
  3. Haemogoblin
    OP

    Haemogoblin Newbie

    Newcomer
    5
    0
    Apr 3, 2015
    Do i just leave what i installed in slot 39? or do i have to uninstall it?
     
  4. TecXero

    TecXero Technovert

    Member
    2,814
    909
    Apr 13, 2014
    United States
    Mainframe
    You mean 36? It's not hurting anything, you can remove it if you really want. For the most part, you'll probably be using IOS58 for homebrew and cIOS249 for Wii backups. There will be a few exceptions, though it's nothing to worry about unless you want to get into EmuNAND or older homebrew.
     
  5. Haemogoblin
    OP

    Haemogoblin Newbie

    Newcomer
    5
    0
    Apr 3, 2015
    TecXero - Thank you for the advice, your gentle nudge in the right direction sorted me out. I was a little confuzzled when it came to using the D2x installer, specially when you hit the screen with the squares filled with numbers. The guide didn't really explain what to do ther so i just went for broke and selected the only block that was flashing and crossed my fingers.

    Now my Wii is modded, does this mean i can play backups of my Wii games? I like taking my Wii over to friends and not having to use original discs would be great.
     
  6. Haemogoblin
    OP

    Haemogoblin Newbie

    Newcomer
    5
    0
    Apr 3, 2015
    I installed that because i thought it would do what the D2x installer did for me just now, but i was still unable to run anything off the USB port.

    "IOS58 for homebrew and cIOS249 for Wii backups" I'm really sorry, but could I trouble you to explain that. The guides tell you to install stuff, but they dont really stop to explain why. I thought I was merely patching the rom, but I gather from your comment, i'm actually installing two seperate patches, is that about right?
     
  7. cobleman

    cobleman GBAtemp Maniac

    Member
    1,458
    19
    Jun 23, 2009
    Australia
    Try going into settings and choose default for Usbloadergx. If you still get a black screen go into wii settings and set up TV type.
    You basically want cios 236, cios 249 base 56, cios 250 base 57 and cios 251 base 58
     
  8. Haemogoblin
    OP

    Haemogoblin Newbie

    Newcomer
    5
    0
    Apr 3, 2015
    I wish understood what the last half of that meant..Its like your speaking code lol
     
  9. cobleman

    cobleman GBAtemp Maniac

    Member
    1,458
    19
    Jun 23, 2009
    Australia
    http://filetrip.net/wii-downloads/homebrew/download-ios236-installer-8-mod-f32100.html
    http://code.google.com/p/d2x-cios-installer/
    http://filetrip.net/wii-downloads/tools-utilities/download-nus-downloader-1-9-f23757.html
    So much easier if your wii is connected to the internet. If not online Download these with NUS and pack as WAD- IOS bases:IOS56 v5661, IOS57 v5918, IOS58 v6175 (you will need ios36 on the root as well not sure which one just download them all and put them on the root of sd card)place these as wads on the root of sd card. You should know at least to have an sd with the rite folder structure with an apps folder.
    Install ios236 useful for installing wads wad manager 1.7. install d2x cios249 base 56 d2x cios250 base 57 and d2x cios251 base 58. Then try usbloadergx again
     
  10. TecXero

    TecXero Technovert

    Member
    2,814
    909
    Apr 13, 2014
    United States
    Mainframe
    An IOS is sort of like a mini OS. Generally software will load with an IOS that gives it access to what it needs. On USB Loader GX, you can go into the settings and set which IOS you want it to use. Since you installed d2x base 56 on the IOS slot 249, you want to set it to 249.