i get a wii u eruop when i turn it on the dvd dont spin and have no power
is there any fuse to check on the motherboard
is there any fuse to check on the motherboard
yah and i tried a driver for my friend wiiu the wii u is powering on but the drive dont spin when i remove it it gave my the error of no drive . so the problem is no power to the driveWhy the motherboard?? Have you tried a new power supply first??
So you have different errors with and without the drive? It should be the same error if the drive gets no power.the wii u is powering on but the drive dont spin when i remove it it gave my the error of no drive .
the voltage for pin 1 to pin 15 are present the rest got -3.3 v . but the strange thing there is no 3.3v on pin 21 and that's always on as it saidThe console starts normally, but there is no noise from the optical drive? then you may need to check the 12V .
https://wiiubrew.org/wiki/Disc_drive
I rechecked all the pins again like the diagram all the Power rails present so the fault must my in the driver bord . What should I check next . Or is there a simple way to remarry a new drive .The console starts normally, but there is no noise from the optical drive? then you may need to check the 12V .
https://wiiubrew.org/wiki/Disc_drive
Did you get the 160-1402 error when connecting your friend's drive?yah and i tried a driver for my friend wiiu the wii u is powering on but the drive dont spin when i remove it it gave my the error of no drive . so the problem is no power to the drive
Yah I reconnected my friend driver and GOT 160-1402 errorDid you get the 160-1402 error when connecting your friend's drive?