Hacking Wii don't boot with priiloader installed file

[TekThink]

Hi, I'm tekthink and I have a problem with my wii with HBC + priiloader installed. Today, while I was exploring the priiloader menu, I see that you can load boot channels with "load / save file" and then going to settings / boot: installed file. So I decided to put as a boot USB loader, following the guide. I restart the Wii, and it doesn't work anymore ... it seems on, because the "eject" button works, but it doesn't return any audio / video output and the ON / OFF and RESET buttons don't work, so I can't access priiloader. Please, can you tell me if there is an external method to reset the priiloader settings, or directly reset the wii!

P.S. I would be eternally grateful to you!

 

[Cyan]

are you sure the reset button doesn't work ?
shutdown the console. Press (and keep pressed until you are inside priiloader) reset, and press power to boot the console.

installing a dol to autoboot shouldn't prevent priiloader from booting.
unless you enabled password protected mode inadvertently to prevent booting ?

Also: we are not blind
Writing in big font doesn't help you get help faster.
you can write in normal font size. thank you.
Using color, it's fine as long as it's not rainbow or yellow on white background.

 

[TekThink]

Ok, the RESET button does not work both when the wii is on and when it is off. I have no password on wii or priiloader. Everything worked, then I went to change the boot on the saved file of USB loader and it no longer works.

 

[Cyan]

do you know if you have bootmii installed?
do you see blue LED flashing quickly 2-3 times when booting the console?

 

[TekThink]

No initially the led is red, then when I turn it on it turns directly green.

 

[Cyan]

Sorry then, I don't know what the problem is or how to help you.
someone else would probably have some ideas why it broke when installing a dol in the boot menu.

 

[Alexander1970]

Hello.

So I decided to put as a boot USB loader, following the guide.

Would you be so kind and can you tell us which Guide you have used please ?
Also,did you remember,which "USBLoader GX File" you have installed ?
Did you tried to boot without the SD Card ?

Maybe we can reproduce what is happened on this Way.

Thank you.

 

[TekThink]

I used USB loader GX (v3.0 i think) as wii channel (WAM). Then, I installed USB loader GX file in priiloader with "load/install file" and then i go in settings and selected "Autoboot: installed file".
When I reboot my wii, died. I could extract or insert games, but the power and reboot buttons were dead and there isnt audio/video output.
If it can be useful, I found the name of the WAD file: USBLoaderGX_v3.0_IOS249.wad

.. and yes, i deconnected HDD and SD from the wii.

This is the video:

 

[Alexander1970]

Thank you.

If it can be useful, I found the name of the WAD file: USBLoaderGX_v3.0_IOS249.wad

Not good - maybe a wrong or "bad" WAD File.Please ONLY use them from here:

https://sourceforge.net/projects/usbloadergx/files/Releases/Forwarders/

https://sourceforge.net/projects/usbloadergx/files/Releases/Forwarders dols/

and

This is the video:

Not good.
Sorry.....using Video Tutorials.......never a good Idea....they never show you ANY Step or which File/Forwarder he used.
Please,why do you not use/read an GBAtemp Tutorial ? Like this one from the Developer himself:
https://gbatemp.net/threads/usb-loader-gx.149922/page-1111#post-6478222

Ok,it is too late now - It is as it is.

Do you have maybe BootMii as boot2 installed ?
Can you still access the Homebrew Channel ?
(I hope one of this Steps...otherwise your Wii is maybe out of Options....)

Thank you and
Good Luck (I really mean it for your Wii !!).

 

[TekThink]

Hi! I has bootmii in HBC menu, but i never opened it, and probably isn’t installed (in boot2)

... and congratulations, the community is much more active than I expected

 

[JumperSama]

Im facing the same issue right now
please tell me if you found any solution to this issue.

 

[AK_Vision]

Yes, I also have the same problem... the only, catch is that I returnera my, Nintendo Wii Games, device to my, supplier at the galleria... I never it to be that Alive and kicking, since it's not the first one that I have owned ... I had a white one about four year's ago, but it got stolen about a year ago, when my, maitnence guy We're at my, home rebuilding my, flat I returnera even my, Sony's PS3 was gone and all I had left was the Xbox one which I only, had one summer with a friend... I forced him to pick it up... and was called up, as he said he's still kept it for Fifa '23, the game... anyway recently, I got money and picked a never unit they are always used... actually, I got the never unit in peace black and my, older one was pale white... I have only, had it for about 2, Months now... things are still Running, good because I still Adobe that gaming for device ... but I modified the newer device unit as well... only, now... I never have done it this way, so was kind of rough on the edges with the internal Wii system... but like my, older one I made it Scott free with no, mistakes and 2/3 try, it brought me back the Homebrew Channnel as a wad... since then I have now a newer Sony's, PS4 and PS3 with the Nintendo Wii but got kind of left out and upload new Games from the romsdl.net about 5 Games for a startup, action sequence and I got lots of apps from my, HP envy for notebook laptop... usbloadergx to Custom ios installer with bootmii or Homebrew launcher and hackmii of course... now, my Nintendo Wii has a booting, error fix (infinite, bootsequence...) at the priiloader app and install priiloader bootloop... it's, going nowhere all get is the priiloader system menu and can't reboot my, Nintendo Wii actually, at the regular wads, channel and I also even have Homebrew Channnel installed and modify, at the online Nintendo Wii modifing, procedure please help, I don't really, think that I have a situation or issue.. the catch is I can't Leave my, Nintendo Wii with a priiloader system menu it's, giving me a headache what Should I do, I am still doing some research because I was not new to the mechanism I actually, only need to handle the bootmii sequence cause I saw how it works, at Youtube but Easy, come Easy go... the main task and goal... never give up...