Hacking Which is better Ps3key or Ps3break???

[Nobunaga]

Well i am planing to buy one of them but i wanna know which one is better

 

[naved.islam14]

ps3break most likely

 

[mixxxk]

im going with the ps3key....
same makers of the wiikey, and before usb softmodding, it was the way to go for me.

 

[theADDict]

PS3Key = updateable, and supported.
ps3break = non updateable...new version V1.1 released, no support for V1 owners.

obvious yeh ?

 

[Nobunaga]

hmm i see so i should buy a ps3key

 

[Pakatus]

PS3Key = updateable, and supported.
ps3break = non updateable...new version V1.1 released, no support for V1 owners.

obvious yeh ?

Wrong.

I have both so i'll tell you.

PS3Key = updatable...but only for the official ps3key updates (and we have already some).
PS3Break = updatable...its an AMTEL T90USB1620 board, so it can be updated from psgroove git (already did mine and it works perfect).

Both are good...just choose the one you like the best

 

[Nobunaga]

Ps3 Break
Original

- Upgradable hardware firmware thoroughly!
- The key "Upgrade" for software upgrading. Users can also upgrade the updated software through computer.
- Reading speed will be 2 times faster and it makes users to play more smoothly.
- Games can be copied and saved to internal or external hard disk, in this way, the expensive blue-ray driver and disc can be abandoned.
- Plug & play USB port, the installation will be finished in a few seconds.
- Homebrew software is supported.
- Simple and clear illustrations will guide you to install step by step.
- PS3 Break is compatible with all fat and slim model.
- Open up your console to a new generation of homebrew applications.

More info from manufacturer: http://www.ps3break.com/

PS3Key

Original - With Serial Number.

PS3Key Modchip Features List:-


* - USB Plug and Play solution that installs in seconds without any need to open up the PS3.
* - Does not break your warranty seal.
* - Compatible with all PS3 models, both Fat and Slim.
* - Supports all regions: USA, JAP, PAL and KOREA.
* - USB device fully updatable by PC.
* - Disables forced software updates and will never brick your console.
* - Supports most games, homebrew and Open Source applications.
* - Easy-to-use software for backing up, managing, and playing games from external USB Hard Drive.
* - Playing games from HDD is much more enjoyable, benefiting from greatly enhanced seek and loading times.
* - Supports installing homebrew application on PS3 and external USB media.
* - Optionally PS3Key can be supplied with an “open” firmware which does not support backup loading. Users would then have to download a firmware update for PS3Key to get full functionality.

- Compatible with all production models FAT and SLIM. Supports all regions: USA, JAP, PAL and KOREA
- Disables forced software updates and will never brick your console. It Supports all games (it does not allow backups of bluray movies , dvd movies , or past consoles games).
- Backup games to your internal hard drive or external hard drive through USB, and boot directly off GUI. Eliminating the need for expensive blueray burners and costly blank media.
- Play backups off your hard drives 2x as fast as off the blueray drive. This eliminates lags and glitches to provide you with smoother game play. Open up your console to a new generation of homebrew applications. Load homebrew apps/games off any USB hard drive/flash drive.
- Fully updatable with new features/updates by connecting PS Jailbreak to any computers USB port.

 

[Pakatus]

as i said...both are updatable.
However ps3key can only be updated from the ps3key official support (and thats not necessarilly bad)

 

[Joe88]

ps3key just uses psgroove anyway

 

[Groomery]

I have both so i'll tell you.

PS3Key = updatable...but only for the official ps3key updates (and we have already some).
PS3Break = updatable...its an AMTEL T90USB1620 board, so it can be updated from psgroove git (already did mine and it works perfect).

Both are good...just choose the one you like the best


How do you do that, i tried to update with the official update but no luck????

 

[Pakatus]

I have both so i'll tell you.

PS3Key = updatable...but only for the official ps3key updates (and we have already some).
PS3Break = updatable...its an AMTEL T90USB1620 board, so it can be updated from psgroove git (already did mine and it works perfect).

Both are good...just choose the one you like the best


How do you do that, i tried to update with the official update but no luck????

Wich one? Ps3key? you couldnt update it? or Ps3break?

 

[Groomery]

I have both so i'll tell you.

PS3Key = updatable...but only for the official ps3key updates (and we have already some).
PS3Break = updatable...its an AMTEL T90USB1620 board, so it can be updated from psgroove git (already did mine and it works perfect).

Both are good...just choose the one you like the best


How do you do that, i tried to update with the official update but no luck????

Wich one? Ps3key? you couldnt update it? or Ps3break?

PS3 BREAK v1.0 Genuine

 

[Twilight Loz]

so they've bypassed the 3.41 firmware?

 

[MakiManPR]

none of them too expensive buy a USBBREAK I have and it works perfectly and its updatable

 

[Pakatus]

I have both so i'll tell you.

PS3Key = updatable...but only for the official ps3key updates (and we have already some).
PS3Break = updatable...its an AMTEL T90USB1620 board, so it can be updated from psgroove git (already did mine and it works perfect).

Both are good...just choose the one you like the best


How do you do that, i tried to update with the official update but no luck????

Wich one? Ps3key? you couldnt update it? or Ps3break?


PS3 BREAK v1.0 Genuine

I updated it with FLIP that i downloaded from the AMTEL website.
I already posted the details in another post...but i'll copy it here:

QUOTE

1 - Download flip and install
2 - Connect dongle to my pc
3 - It installed the "Generic Hub shit" leave him.
4 - Pressed the update button
5 - It started installing a new device.
6 - It installed some shitty thing
7 - Update driver @ device manager
8 - Pointed to FLIP installed directory
9 - Installed ok.
10 - FLIP flashed ok.

 

[turbotronic]

I have both so i'll tell you.

PS3Key = updatable...but only for the official ps3key updates (and we have already some).
PS3Break = updatable...its an AMTEL T90USB1620 board, so it can be updated from psgroove git (already did mine and it works perfect).

Both are good...just choose the one you like the best


How do you do that, i tried to update with the official update but no luck????

Wich one? Ps3key? you couldnt update it? or Ps3break?

PS3 BREAK v1.0 Genuine

only the first generation of ps3break dongles got an amtel chipset... probably you got one with pic chipset which isnt upgradable atm.

 

[Adr990]

PS3Key, its a known team from Wii Mod chips. And good at updates and adding features.

They are also the first to UPDATE their PSJB Device.
Besides PS Groove devices that is.

Their last update added all PS Groove features n stuff.
So all Homebrew n new backuploaders are supported.

And they're working on a totally new backup loader, with ext4 support.

 

[Rydian]

so they've bypassed the 3.41 firmware?

No, nobody has.

The updates are additional features once jailbroken, such as the ability to play backups without a game in the disc drive.

 

[Madhatta]

none of them too expensive buy a USBBREAK I have and it works perfectly and its updatable

How did you update a USBBreak? They have a PIC chipset. I haven't heard anyone say they can be upgraded.

 

[MakiManPR]

none of them too expensive buy a USBBREAK I have and it works perfectly and its updatable

How did you update a USBBreak? They have a PIC chipset. I haven't heard anyone say they can be upgraded.

USBbreak the worldwide release is coming ![2010.09.15]USBbreak has been successfully launched and It's on sale globally.

The exquisite package is as following:
? Upgradeable hardware firmware thoroughly!

? Reading speed will be 2 times faster and it makes users to play more smoothly.

? Games can be copied and saved to internal or external hard disk, in this way, the expensive blue-ray driver and disc can be abandoned.

? Plug & play USB port, the installation will be finished in a few seconds.

? Homebrew software is supported.

? Simple and clear illustrations will guide you to install step by step.

? USBbreak is compatible with all fat and slim model.

For further information, users may visit our website at:www.USBbreak.com; or contact our distributors worderwide. or you may email us at:[email protected]