Hacking USB Loader GX

[Logan]

It shouldn't ask to download r691 anymore.

Thanks Logan

Just tested and no prompts to download

that will save 100's of posts saying it code dumps

warlord

Dimok is now aware of the issue and knows the problem. Keep you posted

 

[warlord007]

It shouldn't ask to download r691 anymore.

Thanks Logan

Just tested and no prompts to download

that will save 100's of posts saying it code dumps

warlord

Dimok is now aware of the issue and knows the problem. Keep you posted

Can you make him aware of the WiiLoader issue as well

warlord

 

[Logan]

It shouldn't ask to download r691 anymore.

Thanks Logan

Just tested and no prompts to download

that will save 100's of posts saying it code dumps

warlord

Dimok is now aware of the issue and knows the problem. Keep you posted

Can you make him aware of the WiiLoader issue as well

warlord

I'll have a look at it once I test it agian. I've not tested file transfer for a few revisions

 

[warlord007]

Thanks logan

Its a pain in the a**e keep unpluging the usb drive all the time

warlord

ps if you want it tested please give me a shout

 

[Logan]

r691 temporary fix.

Extract this:

http://www.4shared.com/file/122153392/3aa73500/language.html

To the SD:\config\ folder. So should have SD:\config\language\*.lang

Theorhetically you should only need your .lang file in the language folder, I only tested with all .lang files.

 

[warlord007]

Done and working

i already had a Language folder, so i deleted ALL files in there

then i copied just the english.lang file

and Wiiload is no different lol jk

warlord

 

[Logan]

USB Loader GX r692 - Click HERE to download

Changes (copied from Google project page):

• *Fixed the CodeDump caused by Rev 690 when no language path or file was on the bootDevice

Both DOL and ELF versions included in archive

!DOWNLOAD AND USE AT YOUR OWN RISK!

Note: If you are going to 'test' these revisions and you're having some issues, first please start from scratch. Backup your SD card, wipe your SD card, and start again. If you're not at least prepared to try this first, please don't download and test these revisions, stick to the released stable versions. Thank you.

This will fix the code dump problems with r690 and r691 guys.

Posts merged

Done and working

i already had a Language folder, so i deleted ALL files in there

then i copied just the english.lang file

and Wiiload is no different lol jk

warlord

Run me by the Wiiload issue again please?

 

[warlord007]

Thats a strange fix ?

i already had the files there.....

unless its in a different format , or name change ?

but thanks for the fix

warlord

 

[Logan]

Thats a strange fix ?

i already had the files there.....

unless its in a different format , or name change ?

but thanks for the fix

warlord

Nah I think if you don't have the /language/ folder on the drive, this revision will create.

 

[warlord007]

AH WiiLoad

yes it was working fine a couple of issues ago, but i remeber reading somewhere that ther was an issue if it was a large file there was a problem ( i didnt get that one though)

but now i get this error

Ecco The Dolphin.wad"
wiiload v0.4
coded by dhewg, #wiidev efnet

connecting to 192.168.101.103:4299
error connecting: Result too large
transfer failed.

the file is 14k

and it transfered a few versions ago ( i want to unintall the wad now )

warlord

 

[Logan]

AH WiiLoad

yes it was working fine a couple of issues ago, but i remeber reading somewhere that ther was an issue if it was a large file there was a problem ( i didnt get that one though)

but now i get this error

Ecco The Dolphin.wad"
wiiload v0.4
coded by dhewg, #wiidev efnet

connecting to IP
error connecting: Result too large
transfer failed.

the file is 14k

and it transfered a few versions ago ( i want to unintall the wad now )

warlord

Ok I just spoke to Dimok. I believe it is a limitation of WiiLoad. It won't handle files over a certain size. There 'was' a filesize limitation in GX, however Dimok removed it around revision 685.

The only way round it is to use a different program called SendELF.

Load up the Wii, go to the title list screen. Click the WiFi icon bottom right (sometimes have to do this twice) unless you have Auto Init Network enabled in options.

Run SendELF once, input your Wii's IP address (I think it fills port in for you). Leave protocol as HB Channel. Close SendElf. Open SendElf again to make sure settings remain. If they don't you may need to first try sending a file through the GUI. After that though, the below should work.

Now you need to associate your .DOL, .ELF and .WAD files with the SendElf application. So just use the open with comman in Windows and setup SendElf to always open those file types.

Once done, just double click a .DOL, .ELF or .WAD file and all should be good.

Let me know if it works.

EDIT: BTW I would remove the IP address from your post or I'll send shit to your Wii

j/k (about the sending shit, but remove your IP

)

EDIT: Hmm I just tried using SendElf for .WAD and it wasn't having it. Leave it with me.

 

[warlord007]

LOL about the IP

its an internal local ip anyway 90% of home pc,s will have a 196.168 one anyway

you will find 10000's of them on the internet

the strange thing with the wiiload problem is that the file was sent with it a couple of revisions ago, but now it wont send the same file ?

i will give sendelf a go when i get it installed


warlord

 

[Logan]

Ah right lol didn't think about that, just saw IP address and thought oops! But yeah you're right internal.

Oh that is strange. I'll let them know

 

[warlord007]

Ah right lol didn't think about that, just saw IP address and thought oops! But yeah you're right internal.

Oh that is strange. I'll let them know

Please et them know ............

SendElf dosent work for me............. Running windows 7 RTM and it just errors.

looks like Wiiload will be my only option, and i guess those others with win7

warlord

 

[HyperVisor]

I've seen a lot of discussions about dol replacement, but I don't seem to get an option for that in the game settings.

I've got an NTSC version of Sports Resort and have put the extracted file from Wiiscrubber in the root of the SD drive and renamed it to the correct 5 digit number for the NTSC version of the game.

However, I don't see any option to enable the dol replacement. I'd seen it on a video in an earlier version, but I don't see it in 1.0.

Any ideas?

 

[warlord007]

I've seen a lot of discussions about dol replacement, but I don't seem to get an option for that in the game settings.

I've got an NTSC version of Sports Resort and have put the extracted file from Wiiscrubber in the root of the SD drive and renamed it to the correct 5 digit number for the NTSC version of the game.

However, I don't see any option to enable the dol replacement. I'd seen it on a video in an earlier version, but I don't see it in 1.0.

Any ideas?

Click on the game (Sports resort) the click the settings tab , then click on the Game settings. Alternat dol can be set there.


@logan Got SendElf working, had to set it to WindowsXP sp3 compatability

warlord

 

[Deleted-119707]

so many releases XD hard to keep up

.
no probs so far...

 

[warlord007]

@logan

Sendelf is now working for ELF and DOL files

I have just seen in your earlier post as well that it DOSENT do WAD files lol

i found the same thing out

it wont allow a .wad extension so wont send it

EDIT: ok got it to send a WAD file but after it sent it , it errored with "not a dol.elf file" so no go for wads this way

warlord

 

[marinos35]

Ah right lol didn't think about that, just saw IP address and thought oops! But yeah you're right internal.

Oh that is strange. I'll let them know

Please et them know ............

SendElf dosent work for me............. Running windows 7 RTM and it just errors.

looks like Wiiload will be my only option, and i guess those others with win7

warlord

it works... in a way.

I while ago, the gx dol was crashing when it was send with wiiload (has been fixed long ago) so I tried sendelf with w7. I had to run the program by right-clicking it and as administrator (if I remember right). When I was using it that way it was working except some random crashes after it finished sending the data.

EDIT: I just saw you got it working.

 

[CoolGeneral]

i have a Problem with USB Loader GX.

since rev. 668 i can't load the following games:

Resident Evil - The Umbrella Chronicles
Resident Evil 4
The House of Dead: Overkill
The House of Dead 2 & 3

A Code Dump appears when i start one of the games. Can anyone help me?