piss off with your fear mongering bullshit. people recommend this particular anker cable because it's been tested by Benson Leung. It's on his list. https://www.amazon.com/gp/registry/wishlist/KF89JCHI0KT4/ref=pdp_new_wl
If you don't know what you are talking about just STFU.
It has the recommended backing by a Google Engineer: Benson Leung. I've never personally used it but I don't see anything wrong with it either...I call that passive recommendation
I cancelled Amazonbasics & purchasing this
https://www.amazon.com/dp/B018S827G...colid=KF89JCHI0KT4&psc=0&ref_=lv_vv_lig_dp_it
Since I have too many microusb cables lying around & this has also been recommended by Benson Leung.
https://www.amazon.com/dp/B018S827G...colid=KF89JCHI0KT4&psc=0&ref_=lv_vv_lig_dp_it
Since I have too many microusb cables lying around & this has also been recommended by Benson Leung.
Reference the link willdunz posted: https://www.amazon.com/gp/registry/wishlist/KF89JCHI0KT4/ref=pdp_new_wl
P.s. it's undervolting that is the issue. The switch will try to pull more power than the host can provide.
With extended use: the host will short out killing USB ports and sending spike through the system. I've provided ample doucmentation in this thread if you would like to know more.
https://www.amazon.de/USB-Kabel-auf...pID=41FdTJMvw3L&preST=_SY300_QL70_&dpSrc=srch
This one should do just fine right?
This one should do just fine right?
Well, the OTG should be on the Micro USB end. Otherwise the Switch will be the host and your phone will be the client, and it probably won't work.
The OTG adapter should always be plugged into the device that's acting as host. Having it the wrong way around may work in certain cases (just a guess), but in this case both the phone and Switch are capable of acting as host and the cable arrangement is the only thing deciding which one is host.
These cords are like four dollars next to the register at CVS. They'll charge your switch hella slow, but I'm assuming most people here aren't using it for that purpose anyway. But go ahead, order a ten dollar cord off Amazon and wait two weeks. Some people on here who think they are technically-inclined may in fact be technically-retarded.
What are you talking about? Amazon takes 3-5 days to ship and 1-2 days for prime users. People may opt to spend 10 dollars more on a cable rather than spend 200 dollars more for a new switch...
What is it you are getting at exactly?
Last edited by Shadow LAG,
Hey guys. The only USB-C cable I currently own is from my old OnePlus 2 phone charger. I've already used it once on my Switch to try out the
Fusée Gelée payload and it worked fine, but it also had a pink screen for a few seconds when I tried to reboot it if that means anything. It still works fine after that but after doing some research on that cable I've found out that it is type-C 1.1 and uses a 10kΩ resistor instead of a 56kΩ resistor. I did buy the phone a couple years after release so I don't know if I got a revised cable (doubt it). That being said do you think it is dangerous to use it for the Switch to run coldboot exploits from now on and I should purchase a new cable?
Fusée Gelée payload and it worked fine, but it also had a pink screen for a few seconds when I tried to reboot it if that means anything. It still works fine after that but after doing some research on that cable I've found out that it is type-C 1.1 and uses a 10kΩ resistor instead of a 56kΩ resistor. I did buy the phone a couple years after release so I don't know if I got a revised cable (doubt it). That being said do you think it is dangerous to use it for the Switch to run coldboot exploits from now on and I should purchase a new cable?
Most phone manufacturers are USB-IF compliant armed with the new knowledge of the 56k ohm pull up resistor rule; however, if you are unsure, you can always buy a new cable tested by Benson Leung:
https://www.amazon.com/gp/registry/wishlist/KF89JCHI0KT4
Interesting. After more googling I saw that Benson Leung himself is the one that reported that my OnePlus 2's USB cable specifically is dangerous to use with other devices. "According to Google Engineer Benson Leung, the OnePlus Type-C USB cables do not comply with the specification and are potentially dangerous to use with some devices." He also mentioned that it's not good to use for devices that use fast charging. I don't use the cable to charge my Switch. I only planned to use it for delivering the payloads from my PC. Do you think that's still dangerous? I'll probably buy a new one just to be safe though.
I believe that decision is ultimately up to you. I can only warn people away from unregulated cables. You are not guaranteed to brick your switch right away with an unregulated cable, but each time you plug it in you are playing a game of chance.
If it were my decision personally, I would spend a couple bucks for a safe cable over buying a new switch / battery.
Last edited by Shadow LAG,
Similar threads
