Homebrew [Tutorial] Setting up Pegaswitch and Preparing for Homebrew

  • Thread starter Thread starter iAqua
  • Start date Start date
  • Views Views 151,909
  • Replies Replies 368
  • Likes Likes 44
yeah i think this might be the way to go at this point. i know you already set it all up on the vm, maybe it will be easier doing it over again on windows? silver lining? no?

here are some details on how i had mine set up:
https://msdn.microsoft.com/en-us/commandline/wsl/install-win10

i need to go to bed i'm fried

The WUBI Installer, install Ubuntu to a Drive Letter of your choice.
No partition is required.
WUBI Installer make a Boot Menu for Windows 10 and Ubuntu.
You must UEFI switch off for correct installation and running for Ubuntu.

Good night.. :-)
 
The WUBI Installer, install Ubuntu to a Drive Letter of your choice.
No partition is required.
WUBI Installer make a Boot Menu for Windows 10 and Ubuntu.
You must UEFI switch off for correct installation and running for Ubuntu.

Good night.. :-)
I'm on win8.1 I install ubuntu with WUBI and when I boot I get the choice between Win8.1 and ubuntu, when I chose ubuntu the don't but and say windows has been modified (I put a photo later)
any idea ?
 
I'm on win8.1 I install ubuntu with WUBI and when I boot I get the choice between Win8.1 and ubuntu, when I chose ubuntu the don't but and say windows has been modified (I put a photo later)
any idea ?

hum.. have you UEFI Bios on?
Check the Bios Setup, then go to Boot, Security = off or from UEFI Bios to Other OS.

OR:

Go to into BIOS, Boot Menu, then start the WUBI...
 
Last edited by merlin555,
this
20171118_184955.jpg
 

First, try to boot from Boot Menu in the Bios setup.
Hold [DEL] key by reset and go to BOOT option or you have a Bootmenu in the Bios setup.
Or by RESET press and hold the F8 key for Boot Menu.

If this not help, press option (3) for repair the windows.

--------------------- MERGED ---------------------------

Apparently I have UEFI and not BIOS

Change to "OTHER OS", or switch the Security MODE = off , in the Boot option (This is in the BIOS!)
 
Last edited by merlin555,
First, try to boot from Boot Menu in the Bios setup.
Hold [DEL] key by reset and go to BOOT option or you have a Bootmenu in the Bios setup.
Or by RESET press and hold the F8 key for Boot Menu.

If this not help, press option (3) for repair the windows.

--------------------- MERGED ---------------------------



Change to "OTHER OS", or switch the Security MODE = off , in the Boot option (This is in the BIOS!)
I can boot on win8.1

I turn the security off nothing change

change to other os, where ?
 
Asus PC after I don't know

okay. i have also a Mainboard from Asus.
see here:


You must only switch the Option from UEFI to OTHER BIOS.

IF this not help, press F8 by RESET your PC and hold it this key.
A Boot Menu appears.
Now, press the entry WUPI..
 
I think I don't have this bios, I have it (here I'm on the security tab) :

View attachment 106345

I see, you have a older PC.
Forget that with the UEFI.

Go with F8 (hold by RESET PC) into Boot Menu.
When you have no Boot menu with F8,
press the key DEL by RESET PC and go to the Boot option.
Select as first the WUBI.. as boot sequence.

If you see no WUBI, uninstall WUBI in Windows 8 and install it new.
 
I see, you have a older PC.
Forget that with the UEFI.

Go with F8 (hold by RESET PC) into Boot Menu.
When you have no Boot menu with F8,
press the key DEL by RESET PC and go to the Boot option.
Select as first the WUBI.. as boot sequence.

If you see no WUBI, uninstall WUBI in Windows 8 and install it new.
I dont understand when I must do what ^^'
 
Last edited by merlin555,

Site & Scene News

Popular threads in this forum