Homebrew trying to load arm11.bin on o3ds... not working..

[Yami_Industries]

I downgraded to 2.1.0 and I'm trying to install a9lh and I type in the link into the browser and it loads but it only flashes the black screen for like a second and then freezes... I press select to install and wait 10 seconds then shut off the system but, when I turn it back on, I'm still on 2.1.0 and luma doesn't load...

 

[Bu2d85]

Do you have the correct arm9.bin and arm11.bin in the root of your sd card?

 

[Yami_Industries]

Do you have the correct arm9.bin and arm11.bin in the root of your sd card?

I have arm9 but no arm 11... where do I get the arm11.bin at??? doesn't say on the tutorial for o3ds anywhere...

 

[GerbilSoft]

I encountered this last night. Try the following:

• Clear the browser save data ("initialize" save data).
• Use a different SD card. (This is what fixed it for my case.) You only need the arm9.bin, arm11.bin, SaleA9LHInstaller.dat, and /a9lh directories on the second card for testing.

The 2xrsa exploit is notably finicky in what cards it wants to work with.

EDIT: A missing arm11.bin would also be a problem. :V

 

[Deleted member 381889]

I have arm9 but no arm 11... where do I get the arm11.bin at??? doesn't say on the tutorial for o3ds anywhere...

Why were you trying to boot arm11.bin with no arm11.bin? What made you think that would work xD
What guide were you using? You should always use https://3ds.guide/
Start again from here https://3ds.guide/installing-arm9loaderhax

 

[el_gonz87]

I downgraded to 2.1.0 and I'm trying to install a9lh and I type in the link into the browser and it loads but it only flashes the black screen for like a second and then freezes... I press select to install and wait 10 seconds then shut off the system but, when I turn it back on, I'm still on 2.1.0 and luma doesn't load...

No CFW can boot 2.1, you need to flash backup with hourglass9 like plailect guide says. What are you following?

 

[Deleted member 381889]

No CFW can boot 2.1, you need to flash backup with hourglass9 like plailect guide says. What are you following?

They hasn't installed A9LH yet, please read. They're missing their arm11.bin.

 

[el_gonz87]

They hasn't installed A9LH yet, please read. They're missing their arm11.bin.

I didn't see the updated posts, not sure why it wouldn't reboot tho. To boot 2.1 without A9LH I didn't thin you don't need arm11.bin on sd card

Edit: NVM I read original post wrong, he can boot into 2.1, then yes A9LH is not installed you are correct.

 

[Bu2d85]

I have arm9 but no arm 11... where do I get the arm11.bin at??? doesn't say on the tutorial for o3ds anywhere...

It should be in the a9lh installer download.

 

[Yami_Industries]

No CFW can boot 2.1, you need to flash backup with hourglass9 like plailect guide says. What are you following?

https://3ds.guide/installing-arm9loaderhax I'm following this guide like everyone else but, I read through each step like 3 times now... nothing mentions an arm11.bin file....

--------------------- MERGED ---------------------------

It should be in the a9lh installer download.

nope, just payloads 1 and 2...

 

[Kyusetzu]

They hasn't installed A9LH yet, please read. They're missing their arm11.bin.

Same for me (funny this thread comes when I got this error.)
I am also missing arm11.bin..
And I'm following the guide with so fucking much attention pwp

 

[Yami_Industries]

Same for me (funny this thread comes when I got this error.)
I am also missing arm11.bin..
And I'm following the guide with so fucking much attention pwp

its inside the safea9lh installer...

 

[el_gonz87]

Prep Work:
6. Copy the contents of the SafeA9LHInstaller .7z to the root of your SD card

 

[Joom]

https://3ds.guide/installing-arm9loaderhax I'm following this guide like everyone else but, I read through each step like 3 times now... nothing mentions an arm11.bin file....

--------------------- MERGED ---------------------------


nope, just payloads 1 and 2...

https://github.com/AuroraWright/SafeA9LHInstaller/releases/tag/v2.0.3

Dunno how you missed this, but here you go.

 

[Bu2d85]

its inside the safea9lh installer...

Hmm..... weird.

 

[Astral_]

Step 6 : Copy the contents of the SafeA9LHInstaller .7z to the root of your SD card

 

[MuratTemp]

I downgraded to 2.1.0 and I'm trying to install a9lh and I type in the link into the browser and it loads but it only flashes the black screen for like a second and then freezes... I press select to install and wait 10 seconds then shut off the system but, when I turn it back on, I'm still on 2.1.0 and luma doesn't load...

Please read the guide again....it says:,,Move the files from A9LH installer to the root if your sd card....

 

[Kyusetzu]

its inside the safea9lh installer...

Ur good. We could be one person. In this moment I realized that too xD
You guys can stop saying it to him, we found it! Thanks! ^-^

 

[Yami_Industries]

installed a9lh on my o3ds... thanks guys...

 

[GerbilSoft]

No CFW can boot 2.1, you need to flash backup with hourglass9 like plailect guide says. What are you following?

For what it's worth, Luma was updated some time ago to support booting 1.x and 2.x on SysNAND. However, this will only work on Old 3DS. If you try it on New 3DS, Luma will get thoroughly confused because it's expecting the CTRNAND partition to be encrypted with keyslot 0x05 (the downgraded version uses keyslot 0x04 like Old 3DS), and it will fail to load with a CTRNAND mount error. The solution, of course, is to chainload Hourglass9 and restore the original N3DS NAND while preserving A9LH.

I suppose it would be possible for Luma to check the NCSD header to see if it's a downgraded N3DS, but that's more trouble than it's worth, especially due to the sleep mode issues.