Sounds like a SXOS prob to me... What happens under AMS? Same thing?
Yes same thing for that as well - I've attached my uf2 in the above post - can you test it for me please, so I can rule that out as an issue? thanks.
Sounds like a SXOS prob to me... What happens under AMS? Same thing?
I can. But you may have a bit of a wait.
I`m working on the file-based emuMMC. Made some changes and got it booting.
Getting an exception though.
OK. Which one worked fine?@mattytrog you can fix rcm-x86 to search payload.bin on sd? because when use this UF2 file chip keep on and can't use Goldleaf usb install, i try all uf2 disponible, only 1 work fine but kill joycon on right side ( i refeer to switchboot uf2)
OK. Which one worked fine?
I thought I had fixed RCM-X86. Will take a look.this one https://github.com/mattytrog/Switchboot_PART_2/blob/master/Switchboot-V1.3.5/Switchboot Part 2 UF2/REBUG_SWITCHME_SWITCHBOOT_PART2_V135a.UF2
won't "kill" usb but "kill" right joycon on portable mode
I thought I had fixed RCM-X86. Will take a look.
RCMX86 internal
Sounds like your reset button is stuck down on the chip or something.this one you mean https://github.com/mattytrog/Fusee-UF2/blob/master/Fusee_UF2_V3/RCMX86_INTERNAL_FUSEE_UF2_V3.UF2 ?
kill joycon on portable mode too
Sounds like your reset button is stuck down on the chip or something.
I am running it currently on my bench board and two other consoles.
Any chance of a picture of your install sir?
Your wiring is incorrect sir.
The joycon strap is incorrect.
Also please reflow the GND and RESET pad with flux. They look like a bit like "pigeon shit" as we say in the trade.
Apart from that, good job.
Follow this:
https://gbatemp.b-cdn.net/attachments/rcmx86-internal-final-jpg.154658/
You only need to connect the joycon strap. Things will be better then.
Solder the orange one to the correct point.
You have it connected correctly it seems on the Switch side, but it is connected to D0 on the RCMX86. This is incorrect. At least for my software anyway.
Connect to D2 instead.
No problem! Let me know if it is workingBtw the pidgey shit yoy reter ( i laungh so much )
Is hot glue down the chip
--------------------- MERGED ---------------------------
Thank you so much for the help and sorry for bother you, i don't check your wiring os diff from rcm-x86 Github, thank you for the support and for you work on the scene