Hacking [Tools] AmiiBomb

[DeoNaught]

Does this work with a Arduino mini? like this?
https://www.amazon.com/OSOYOO-ATMEG...8&qid=1492637950&sr=8-5&keywords=arduino+mini
and this should work with the wii u too? right?

 

[leerpsp]

I was hoping something like this would come out I'm gonna buy the stuff up and set it up the best i can then i'm gonna 3d print a case for it all and set it up tell this comes out! keep up the good work I know Ill enjoy using it when it comes out.

 

[leerpsp]

Does this work with a Arduino mini? like this?
https://www.amazon.com/OSOYOO-ATMEG...8&qid=1492637950&sr=8-5&keywords=arduino+mini
and this should work with the wii u too? right?

if it works with the switch it will work with the wii u and the 3ds as well.

 

[leerpsp]

I just put in my order for the Arduino Uno R3 with the USB Cable Type AB and the RFID Module RC522 and only payed $2.15 because of coupons/gift card i got for free and using aliexpress I think I did some smart shopping!

 

[aut0mat3d]

@LoDeus
The RFID Module seems to be the right one
For the Wires i would suggest https://www.aliexpress.com/item/Free-shipping-Dupont-line-120pcs-10cm-male-to-male-male-to-female-and-female-to-female/32347691887.html? as they are insulated
The Arduino is a standard Arduino with AtMEGA 328 - should be fine when comparing to the OP

As there is no released Software from the OP you have always a risk of having components not supported (design changes), but having an arduino laying around is never a lost (go get coding)

 

[ToX Y-Ray]

WOW, very interested in this! It seems like a super cool project!

 

[Bergerking]

All Parts ordered from Ali...

 

[leerpsp]

This is gonna be big this stuff is gonna end up selling out every were lol.

 

[aleksandyr]

Folks buying clones and random NFC522 boards - match your pin labels (SCK, GND, 3v3, etc.) on the boards you get - they might not match the AmiiBomb diagram!

Here's a $17 (shipped with Prime) combination kit from Amazon:

http://smile.amazon.com/dp/B01KXCLGHU

• Arduino R3 clone
• NFC522 board
• USB A-to-B cable
• Various headers and wires
• NFC card and NFC keychain fob

You'll still need a soldering iron to attach the headers to the NFC522 board - and no guarantee the card/fob are useful at all - but it might be easier than dealing with AliExpress. I ordered their NFC522 board and will post results this weekend.

Thanks for putting this together OP - looking forward to the release!

 

[leerpsp]

Folks buying clones and random NFC522 boards - match your pin labels (SCK, GND, 3v3, etc.) on the boards you get - they might not match the AmiiBomb diagram!

Here's a $17 (shipped with Prime) combination kit from Amazon:

http://smile.amazon.com/dp/B01KXCLGHU

• Arduino R3 clone
• NFC522 board
• USB A-to-B cable
• Various headers and wires
• NFC card and NFC keychain fob

You'll still need a soldering iron to attach the headers to the NFC522 board - and no guarantee the card/fob are useful at all - but it might be easier than dealing with AliExpress. I ordered their NFC522 board and will post results this weekend.

Thanks for putting this together OP - looking forward to the release!

https://www.amazon.com/gp/product/B01EWOE0UU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 I got this Arduino R3 hope this one works the same as the one listed.

 

[aleksandyr]

https://www.amazon.com/gp/product/B01EWOE0UU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 I got this Arduino R3 hope this one works the same as the one you listed.

Arduino R3 clones are common enough (and the design is simple enough) that you're probably not going to have any issues.

 

[Jiehfeng]

Ahh finally, while searching on ebay a few months ago I came across the cheap RFID R/W and I thought if it could be used with a Raspberry Pi in some way to write amiibos. Good luck with the project!

 

[Sliter]

well I think I should order my kit here , maybe they came after the program release xD the only problem is investment of 100 tags in one time :v well I guess some friends gonna win some "amiibos" here xD

7x Pin Wire Male-Female (around $1 for x20)

I'm a bit lost, the modules and arduino pins aren't all M? so we need F-F, right? (Maybe I don't buy these anyway, I can recicle from these "hddled", "porwerled", etc wires from old computers :v

 

[AdamRav]

Thanks bro. Don't usually do these things but im gonna give it a go aswell. Ive ordered 100 NFC cards off ali already a few weeks ago. Ill look around for the other parts on amazon or something. Any UK links to what people buy would be helpful aswell for a newbie like myself

 

[DeoNaught]

Ok, so will an Arduino Mini work also?

 

[Sliter]

Looks and sounds fantastic! Does it work with Ubuntu at all?

I remind someone using ubuntu and arduino to write tags ...
and I found it lol
https://games.kel.mn/en/create-amiibo-clones-with-arduino/
Not practic as our OP here is doing but is also looks very good!

 

[Zarklord]

welp I ordered the parts fingers crossed for them being the right ones....

 

[LoDeus]

@LoDeus
The RFID Module seems to be the right one
For the Wires i would suggest https://www.aliexpress.com/item/Free-shipping-Dupont-line-120pcs-10cm-male-to-male-male-to-female-and-female-to-female/32347691887.html? as they are insulated
The Arduino is a standard Arduino with AtMEGA 328 - should be fine when comparing to the OP

As there is no released Software from the OP you have always a risk of having components not supported (design changes), but having an arduino laying around is never a lost (go get coding)

Thanks for the wires, I never approached anything like that (soldering, technologic board or all), I may fd up that but I want to try this, it seems to be a useful low cost alternative, except that I don't think my parents have a iron soldering thing xD

 

[Warmo]

Wow, its more than half the price compared to gear such as those power tag things, think i'm gonna get some more stuff from Ali later!

Also, about the 215 tags, are they a write-once kinda deal? (Like burning a CDR?) And also is there a way to use the NFC reader you stated but in a raspberry pi? I would hope so because of the IO ports...

Thanks for the wires, I never approached anything like that (soldering, technologic board or all), I may fd up that but I want to try this, it seems to be a useful low cost alternative, except that I don't think my parents have a iron soldering thing xD

I assume its a simple solder to attach the pins to the RFID module for the connection to the UNO, its a very simple solder job, it could be worse! (My first go was modding a DMG!)

 

[Sliter]

Thanks for the wires, I never approached anything like that (soldering, technologic board or all), I may fd up that but I want to try this, it seems to be a useful low cost alternative, except that I don't think my parents have a iron soldering thing xD

this you cana sf for someone that have one where they repair eletronics XD
I'm not mcuha friend of soldering irons ... I don't have one but I can sue my work's one XD

Also, about the 215 tags, are they a write-once kinda deal? (Like burning a CDR?)

Far I know, yes, it gonna be that "amiibo" forever XD idk how maslanders could made it reusable õ3o