Hacking Switch won't start

[Nerakami]

Hello !
I stopped using my switch for 2-3 months, and there, even after a night of charging, it does not turn on anymore, autorcm mode was activated before I stop using the switch
She is dead ? or other people have already encountered this problem xD
(I tried to hold the power button, but ... No success)

Any ideas ?

Thanks !

 

[Kubas_inko]

It is in RCM. Problem solved.
Connect it to PC and push any payload.
If it does nothing, let it charge again (for at least 30 min) and try connecting it again.

 

[x65943]

Hello !
I stopped using my switch for 2-3 months, and there, even after a night of charging, it does not turn on anymore, autorcm mode was activated before I stop using the switch
She is dead ? or other people have already encountered this problem xD
(I tried to hold the power button, but ... No success)

Any ideas ?

Thanks !

What happens when you connect it to tegrarcmgui on your PC?

Edit: ninja'd

 

[Nerakami]

Yeah i tried this solution, when i inject any payload tegra close after 1-2seconds
It's charging, we will see the result in one hour

Thanks !

 

[x65943]

Yeah i tried this solution, when i inject any payload tegra close after 1-2seconds
It's charging, we will see the result in one hour

Thanks !

So to be clear, it does say rcm detected?

 

[Nerakami]

So to be clear, it does say rcm detected?

Yes

 

[Kubas_inko]

Yes

So problem solved.

 

[Nerakami]

So problem solved.

Actually no :/
After like 1 hour~ of charging, i'm in the same config
Tegra show RCM OK and after i click on the injection, tegra close after 1-2sec and nothing happens on the switch, black screen

 

[Kubas_inko]

Actually no :/
After like 1 hour~ of charging, i'm in the same config
Tegra show RCM OK and after i click on the injection, tegra close after 1-2sec and nothing happens on the switch, black screen

Well, which payload are you using?
Also, use the latest tegrarcmgui.

 

[Nerakami]

hekate 4.9.1
And i use the latest tegrarcmgui 2.5

 

[Paulsar99]

What cfw are you using. It might help having the latest files on your sd card as well.

 

[Nerakami]

What cfw are you using. It might help having the latest files on your sd card as well.

ReiNX, the last version

 

[Nerakami]

No success, switch is dead i suppose

 

[Kubas_inko]

No success, switch is dead i suppose

It cant be dead if it shows up for a few seconds as apex device. It can be cable, port, whatever.

 

[Dust2dust]

No success, switch is dead i suppose

Yep, your Switch is dead. Please feel free to give it to me, or sell it for a very cheap price. Seriously, don't give up so easily, man! You just completely depleted your battery with autoRCM. It happened to lots of people on this forum. Search around. You have to be patient and wake up your battery to let it recharge fully. P.S. That's one reason I never bothered with autoRCM. My modded joycon is 100% reliable to enter RCM. Never failed once.

 

[Budsixz]

No success, switch is dead i suppose

turn off auto rcm then boot into ofw and let it charge cause i think your battery is drained and auto rcm just keeps draining battery even when switched off and doesnt let the device charge

 

[Nerakami]

Yep, your Switch is dead. Please feel free to give it to me, or sell it for a very cheap price. Seriously, don't give up so easily, man! You just completely depleted your battery with autoRCM. It happened to lots of people on this forum. Search around. You have to be patient and wake up your battery to let it recharge fully. P.S. That's one reason I never bothered with autoRCM. My modded joycon is 100% reliable to enter RCM. Never failed once.

Switch is now "working"
I used tegra installer, but it works with the portable version only. On the other hand the switch is stuck on the switch logo now haha

EDIT : Mmh, i can start the nintendo switch in normal mode only, if i use reinx, i'm stuck at the logo (autorcm disabled now)