Hacking SWITCH NOOB PARADISE - Ask questions here

[Pascal073]

After following these steps, try running homebrew. It is recommended that you use title override and not the photo album.

I followed the steps, but when im the home screen of the switch and hold R there isnt much happening and when i press on the photo album it still gives the error.

--------------------- MERGED ---------------------------

• Make sure the SD card is FAT32.
• Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
• Download the latest atmosphere
• Download the latest fusee-primary (next to Atmosphere)
• Download the patches (for Atmosphere v0.13.0)
• Put Atmosphere and the signature patches onto your SD card
• Put the SD into your Switch
• Enter RCM
• Launch Atmosphere using fusee-primary
• After following these steps, try running homebrew. It is recommended that you use title override and not the photo album.
• 
  
• I followed these steps but when im at the home menu and hold the R button there isnt much happening.
• Also when i press on the photo album it still gives the error code

 

[Lacius]

but when im the home screen of the switch and hold R there isnt much happening and when i press on the photo album it still gives the error.

Launch the photo album without holding R.

Title override is when you hold R while launching a game, not the photo album.

 

[Pascal073]

Launch the photo album without holding R.

Title override is when you hold R while launching a game, not the photo album.

Then it also gives the 2013 error code

 

[Lacius]

Then it also gives the 2013 error code

Post the following:

1. A picture of the error code
2. A picture of the root of your SD card

 

[Pascal073]

Post the following:

1. A picture of the error code
2. A picture of the root of your SD card

i found the solution, i downloaded a new hbl.nsp added it the SD card and now its working !

 

[Lacius]

i found the solution, i downloaded a new hbl.nsp added it the SD card and now its working !

This means you didn't follow my steps properly.

 

[Ssseth]

Thanks. I will try that tomorrow. I’m assuming this won’t modify or hurt my existing setup, backups or save files? I’ve got a lot on it that my kid would be pretty upset at if she lost all that progress and existing games.

AutoRCM is what again?

Thanks for the answer on AutoRCM, that sounds nice to have rather than needing the dongle each time.

I still have the question though about existing game backups and saves already in the card. Will the recommended steps wipe all that out or will it still be in place after (just with the upgraded firmware / files for newer games)?

 

[Pascal073]

Do you guys know any good sites where i can download nsp?

 

[Lacius]

Do you guys know any good sites where i can download nsp?

You can't share those kinds of sites here.

 

[Chibameta]

Hey,
I've wiped my SD clean (formatted it) and installed the jailbreak again, most updated version,
I installed Awoo and installed the most-updated sigpatches manually, and through Awoo itself (current signature patches installed for up to HOS ver 10.0.3)
But all my installed games through Awoo and goldleaf fails. maybe some files are corrupted, but even those who worked previously fine are failing. (OpenFileSystemWithId:122: Failed to open file system with id: ...... Error code: 0x00234c02)

Any Ideas?

Thanks

 

[ConraDargo]

You hold R to load the Album now.

Well, yes. Otherwise I wouldn't have been able to open the album and choose what screenshots to share The problem comes right after that; when instead of letting me "edit and share", the hbmenu opens up.

 

[gamerdad4477]

Hi,

I am new to this community and Switch modding. I am looking for some good easy tutorials for modding my Switch. My Switch is unpatched. I also purchased a RCM Loader and have a 64 GB sd card.

If anyone can point me in the right direction for a step by step tutorial with updated info that would be great.

thank you

 

[Draxzelex]

Hi,

I am new to this community and Switch modding. I am looking for some good easy tutorials for modding my Switch. My Switch is unpatched. I also purchased a RCM Loader and have a 64 GB sd card.

If anyone can point me in the right direction for a step by step tutorial with updated info that would be great.

thank you

https://switch.homebrew.guide/

 

[impeeza]

Hi, I thinks it's a very noob question but, where make it if no here:

I have a game on NSP format and other NSP updates. Should I install all updates in version order? or the latest Update is enough? thanks a lot.

 

[Draxzelex]

Hi, I thinks it's a very noob question but, where make it if no here:

I have a game on NSP format and other NSP updates. Should I install all updates in version order? or the latest Update is enough? thanks a lot.

Latest is fine.

 

[Shizuex]

hello, I hope I can ask my question here.

I installed atmosphere just like edizon.

So far everything works in animal crossing.

yesterday i wanted to add some cheat codes.

If I do that, edizon will crash. As soon as I insert a second file, I only see the codes of the first file that I downloaded here.

can someone help?

(Sorry for bad English)

 

[Daroxx]

If you're using Hekate to boot Atmosphere, you might not be following my instructions.

A partition emuNAND is also recommended, yes.

Got it running now. Finaly got eveything setup with this partition guide (https://www.reddit.com/r/SwitchHacks/comments/c7c7sj/tutwin_setting_up_partitions_for_emummc_with/) and going with sd partition instead of sd file. Just got my first snes games running. Thanks a lot mate.

 

[DeareN]

In order to use Caffeine method on switch with Pegascape does my SD card needs to be fat32 format?
After making the emunand etc how can I install nsps on the SD card which are over 4gb?
Which apps should I use
Thank you

 

[Lacius]

In order to use Caffeine method on switch with Pegascape does my SD card needs to be fat32 format?
After making the emunand etc how can I install nsps on the SD card which are over 4gb?
Which apps should I use
Thank you

It is highly recommended that you format your SD card as FAT32, since exFAT is more likely to cause data corruption.

You should install all of your NSP files, not just files bigger than 4GB, over a USB, FTP, or internet connection. You can accomplish this using blawar's Tinfoil on your Switch and Nut on your computer. HBG is recommended for installing games from over the internet.

 

[shinwg]

since SXOS betav3.0.4 is out is safe now to update emunad with choi to the last update? also beside choi any other way to install update offline for emunad on SXOS core mariko thanks for any advice