Hacking SWITCH NOOB PARADISE - Ask questions here

[Lacius]

before the restore it was on 8.1.0. I am not sure about the versione of the backup. I think it's the 4.1 if i recall it correctly

If you don't know the version of your backup, then you need to use this guide or this guide to restore your Switch. When you're done with the guide, you will have to update to 8.1.0 before it will boot normally (i.e. without fusee-primary or Hekate), assuming your fuses were burnt.

If you're confident your backup was from 4.1.0, you can try only doing Steps 0-6 in the first guide using 4.1.0. If that doesn't work, do the whole guide.

 

[Deleted User]

@Lacius just want to thank you for all the help. I've succeeded in changing to Kosmos and I'm now on 8.1.0. I guess I'll play some 3Houses!

 

[gianm93]

If you don't know the version of your backup, then you need to use this guide or this guide to restore your Switch. When you're done with the guide, you will have to update to 8.1.0 before it will boot normally (i.e. without fusee-primary or Hekate), assuming your fuses were burnt.

If you're confident your backup was from 4.1.0, you can try only doing Steps 0-6 in the first guide using 4.1.0. If that doesn't work, do the whole guide.

I always had autorcm on, so I think that my fuses are from 4.1.0 (if that's the correct version)

 

[Lacius]

I always had autorcm on, so I think that my fuses are from 4.1.0 (if that's the correct version)

If your fuse count is low, then disregard the part about having to update. You will need to update to 8.1.0 if your intention is to use your sysNAND for online play.

 

[gianm93]

If your fuse count is low, then disregard the part about having to update. You will need to update to 8.1.0 if your intention is to use your sysNAND for online play.

There is a way to count my fuses?

 

[Lacius]

There is a way to count my fuses?

Boot into Hekate and check your fuse count there.

 

[gianm93]

Boot into Hekate and check your fuse count there.

burnt fuses 10-0. What that means?

 

[Lacius]

burnt fuses 10-0. What that means?

Ten fuses means you did not preserve your fuses with AutoRCM properly. After following the guide, you will have to update to 8.1.0 for your Switch to boot normally.

 

[gianm93]

Ten fuses means you did not preserve your fuses with AutoRCM properly. After following the guide, you will have to update to 8.1.0 for your Switch to boot normally.

that's strange, I always had autorcm on. I will update then

 

[Lacius]

that's strange, I always had autorcm on. I will update then

If you ever once booted into 8.1.0 without AutoRCM, then that is what burnt your fuses.

 

[darkriku2000]

I have an auto-rcm switch with sx-os but I'd like to put lakka on another sd card but far as I can tell I need hekate for that, how can I run hekate and lakka with the sx dongle?

 

[Lacius]

I have an auto-rcm switch with sx-os but I'd like to put lakka on another sd card but far as I can tell I need hekate for that, how can I run hekate and lakka with the sx dongle?

You can use a custom boot.dat to launch Hekate with the SX dongle.
https://gbatemp.net/threads/turn-any-rcm-payload-into-boot-dat-for-usage-with-sx-pro.511052/

Alternatively, SX OS also has a payloader.

 

[darkriku2000]

edit: nevermind I found the method, thanks for pointing me in the right direction!

 

[Lacius]

Thank you. Sorry, is there a guide for doing so on the forums?

See above. I edited my post before your response.

 

[darkriku2000]

Oh perfect, thank you!

 

[iluvfuzz]

I've heard I can install xcis via tinfoil. I know how to install nsps but how do I do xcis?

 

[erk]

@Draxzelex thanks man- did the trick!

 

[Lacius]

I've heard I can install xcis via tinfoil. I know how to install nsps but how do I do xcis?

If you're using DZ Tinfoil, for example, you can install them the same way you install NSP files. Alternatively, you can convert XCI files into NSP files.

 

[Dustin161219]

I am having trouble moving my Nintendo folder to my new sd card I have tried different ways and keep getting different errors

 

[Lacius]

I am having trouble moving my Nintendo folder to my new sd card I have tried different ways and keep getting different errors

Is your new SD card exFAT? Is the old SD card FAT32? Does the Switch have exFAT support installed? Which error are you getting? Are you using an emuNAND?