Hacking [SUPPORT] rxTools Official technical support thread

[shinonome]

i've compiled latest version from github, place everything on sd card, and its working fine only with browser. When i'm try to launch from ds profile top screen became gray and 3ds just freeze
I have fw 4.3 eur not downgraded 3ds, please help

 

[Sels]

I'm not sure what happened but im on rxtools 2.6 emunand 9.8 3ds xl us everythings working fine but today when my 3ds xl finished charging, I turned it on and ran rxrools on ds profile exploit it shows up the boot screen loading rx tools and suddenly it just goes black screen. It doesnt load anymore. Ive tried booting rxtools on the hold r button where you will choose boot rxmode on emunand but still. It does not load. Before this happened I just played pokemon x and saved it and then returned home on the 3ds xl then turned off then I plugged it in the charger. What is supposed to be the problem? Thanks for the help.

 

[Sels]

I'm not sure what happened but im on rxtools 2.6 emunand 9.8 3ds xl us everythings working fine but today when my 3ds xl finished charging, I turned it on and ran rxrools on ds profile exploit it shows up the boot screen loading rx tools and suddenly it just goes black screen. It doesnt load anymore. Ive tried booting rxtools on the hold r button where you will choose boot rxmode on emunand but still. It does not load. Before this happened I just played pokemon x and saved it and then returned home on the 3ds xl then turned off then I plugged it in the charger. What is supposed to be the problem? Thanks for the help.

Nevermind. It ran when I took out the r4 dual core cart!

 

[Elveman]

o3DS eur 7.2.0/4.5.0 (emuNAND 9.8, unlinked)
I tried to inject FBI into SysNAND with rxTools (using right version v2050) but then when I boot H&S app in rxMode, it boots into H&S app itself and then crashes whenever I try navigating through it. What am I doing wrong? Thanks

 

[StriderVM]

o3DS eur 7.2.0/4.5.0 (emuNAND 9.8, unlinked)
I tried to inject FBI into SysNAND with rxTools (using right version v2050) but then when I boot H&S app in rxMode, it boots into H&S app itself and then crashes whenever I try navigating through it. What am I doing wrong? Thanks

Injecting H&S into a downgraded sysNAND (Thru Gateway) causes those problems. Even the emuNAND created from that downgraded sysNAND also has the same problem.

Inject the H&S app in the 9.8 emuNAND instead. Why did you inject FBI in the sysNAND anyway?

--------------------- MERGED ---------------------------

Tried installing FBI to sys nand and emunand and getting Error: Invalid Content Data hash.
Region: U and app is v2051

Edit: Now can't launch the Health and Safety App.

What is your sysNAND? Was it downgraded by using Gateway?

 

[Monty Kensicle]

Is mset downgrading possible on 9.2 sysNAND?

 

[StriderVM]

Is mset downgrading possible on 9.2 sysNAND?

I thought you can downgrade mset as long as you can run rxTools?

 

[samiam144]

I thought you can downgrade mset as long as you can run rxTools?

@Monty Kensicle MSET downgrading is possible on any firmware as long as you have the tools (ie. a way to run a CIA installer)

 

[Monty Kensicle]

@Monty Kensicle MSET downgrading is possible on any firmware as long as you have the tools (ie. a way to run a CIA installer)

I have done this, but trying to run the mset exploit after downgrading and running the .NDS application only causes an error message to come up telling me the system will now reboot.

 

[StriderVM]

What NDS file? Just to be 100% sure....

 

[Monty Kensicle]

What NDS file? Just to be 100% sure....

The one bundled with rxTools... Isn't that what I'm supposed to be using?

 

[samiam144]

I have done this, but trying to run the mset exploit after downgrading and running the .NDS application only causes an error message to come up telling me the system will now reboot.

Even if you downgrade mset, you need to use the right installer. Look at Apache Thunder's posts in the last few pages

 

[Monty Kensicle]

Even if you downgrade mset, you need to use the right installer. Look at Apache Thunder's posts in the last few pages

Um, nothing he's posted to this thread mentions that, but he did post this link on the original rxTools thread.
https://github.com/ApacheThunder/rxTools/releases/tag/3.0b

Is that what you're talking about? I should use "rxToolsCakeROP.nds" from here?

 

[samiam144]

Um, nothing he's posted to this thread mentions that, but he did post this link on the original rxTools thread.
https://github.com/ApacheThunder/rxTools/releases/tag/3.0b

Is that what you're talking about? I should use "rxToolsCakeROP.nds" from here?

Yes I believe that's the one, although I haven't tried it since I'm on 4.2

 

[Smellyfinger]

I've been playing around and researching for an hour now and I'm stuck. I'm trying to generate xorpads with rxtools but I need sdinfo.bin

I have ncchinfo.bin now but I can't seem to generate sdinfo.bin with sdinfo_gen.py. Can anyone help please? I'm a noob to python so I have no idea what I'm doing.

In cmd I'm in the directory of the python files and I paste in file path to dB folder. But I get this: Error 2 The system cannot find the file specified 'D://Nintendo'

 

[Lenan]

I' having a weird issue with the latest build of rxTools(2.6 and a self-compiled version of the latest github)
Whenever I boot into emunand, it loads up home menu but after it loads 3-4 games/icons, my console just freezes.
Anyone got any ideas what might be wrong?

 

[StriderVM]

I've been playing around and researching for an hour now and I'm stuck. I'm trying to generate xorpads with rxtools but I need sdinfo.bin

I have ncchinfo.bin now but I can't seem to generate sdinfo.bin with sdinfo_gen.py. Can anyone help please? I'm a noob to python so I have no idea what I'm doing.

In cmd I'm in the directory of the python files and I paste in file path to dB folder. But I get this: Error 2 The system cannot find the file specified 'D://Nintendo'

You do not need sdinfo.bin if you're just generating xorpads.

 

[djalmafreestyler]

Does anyone know what's the changelog of 3.0b2 version?

 

[Koryushin]

MSET and spider fixed!

 

[urherenow]

i've compiled latest version from github, place everything on sd card, and its working fine only with browser. When i'm try to launch from ds profile top screen became gray and 3ds just freeze
I have fw 4.3 eur not downgraded 3ds, please help

I'd like to know how you compiled from github. I've tried several ways and always get errors. I can compile everything else just fine (FBI, Pasta CFW, etc...) It would be appreciated if you could say what you did, including exactly what versions of mingw and stuff you used...