SSBB on Configurable Usb Loader

Discussion in 'Wii - Hacking' started by zaz22, Feb 7, 2010.

Feb 7, 2010

SSBB on Configurable Usb Loader by zaz22 at 4:33 AM (12,148 Views / 0 Likes) 27 replies

  1. zaz22
    OP

    Newcomer zaz22 Member

    Joined:
    Oct 1, 2007
    Messages:
    13
    Country:
    New Zealand
    Hi everyone

    I'm new to the usb loader stuff. So i installed all my games to my usb device and needed ios to wii. Configurable usb loader loads up fine using the fat32 verion with Hermes IOS222 version 4. It seems all my games work except Super Smash Brothers Brawl. When i select the cover it goes into the Screen with the options and freezes, saying Wbfs panic: malloc fst. What does that mean? Anyone?

    I read somewhere that it may be due to it not being able to find the disc music, so i made it force start. But that returned an error of -1 and crashed the usb loader.

    Any ideas?

    Thanks

    By The way
    My wii is pal have tried ssbb ntfs and pal versions
     


  2. nitrostemp

    Member nitrostemp GBAtemp Maniac

    Joined:
    Mar 15, 2009
    Messages:
    1,264
    Country:
    Australia
    have you tryed using ntfs rather than fat32
     
  3. zaz22
    OP

    Newcomer zaz22 Member

    Joined:
    Oct 1, 2007
    Messages:
    13
    Country:
    New Zealand
    Nope don't really want to if i can avoid it, have been using wii backup manager to put isos on the wii if that changes anything
     
  4. nitrostemp

    Member nitrostemp GBAtemp Maniac

    Joined:
    Mar 15, 2009
    Messages:
    1,264
    Country:
    Australia
    and they are split at .wbfs files?
    also i play smash bros off my ntfs without the files being split up and there are no issues, it may be because of all the small files and fragmentation that fat32 causes
     
  5. zaz22
    OP

    Newcomer zaz22 Member

    Joined:
    Oct 1, 2007
    Messages:
    13
    Country:
    New Zealand
    2 wfbs files
    RSBP01.wbf1
    RSBP01.wbfs
     
  6. nitrostemp

    Member nitrostemp GBAtemp Maniac

    Joined:
    Mar 15, 2009
    Messages:
    1,264
    Country:
    Australia
    its most likely the fragmentation
     
  7. zaz22
    OP

    Newcomer zaz22 Member

    Joined:
    Oct 1, 2007
    Messages:
    13
    Country:
    New Zealand
    why only for ssbb ? If i make another partition on my hd for ntfs will the usb loader understand that i have some games on fat32 and some on ntfs?
     
  8. nitrostemp

    Member nitrostemp GBAtemp Maniac

    Joined:
    Mar 15, 2009
    Messages:
    1,264
    Country:
    Australia
    it sure will, all you have to do is mount the ntfs partition in the cfg loader settings
     
  9. zaz22
    OP

    Newcomer zaz22 Member

    Joined:
    Oct 1, 2007
    Messages:
    13
    Country:
    New Zealand
    could you give me an example of that please?
    Lets say my partitions are as follows
    Partition 1 Fat32
    Partition 2 ntfs

    Also i am using the fat32 boot dol, will i have to use a different one for this to work?
     
  10. nitrostemp

    Member nitrostemp GBAtemp Maniac

    Joined:
    Mar 15, 2009
    Messages:
    1,264
    Country:
    Australia
    you do not have to change your dol for it to work, just press the settings button twice, then go down to partition and select the ntfs one
     
  11. zaz22
    OP

    Newcomer zaz22 Member

    Joined:
    Oct 1, 2007
    Messages:
    13
    Country:
    New Zealand
    probably a silly question but where do you just place the iso files on the ntfs drive? in a folder called wfbs still? or what?


    Ok i loaded iso and it did this
    I just used wii back up manager which made a wbfs structure on my ntfs drive and place a wbfs file in I:\wbfs\Super Smash Bros. Brawl [RSBE01]\RSBE01.wbfs is this correct? cause in Configurable usb loader it didnt not find any games on the ntfs partition

    then i removed and did the same thing again and it showed ssbb in the games but when i select the game, wbfs panic: malloc fst even on ntfs [​IMG]
     
  12. nitrostemp

    Member nitrostemp GBAtemp Maniac

    Joined:
    Mar 15, 2009
    Messages:
    1,264
    Country:
    Australia
    yea it works just the same as fat32 except you could just put it as a .iso
    did you remove smash bros from the fat32?
     
  13. hyr8

    Newcomer hyr8 Member

    Joined:
    Feb 3, 2010
    Messages:
    12
    Country:
    United States
    i had the same problem as you, searched and found no one with it. i was also using wii backup manager...
    have you tried to use wbfs_file utility to convert your iso ? i did it, and worked perfectly for me, give it a try.
     
  14. zaz22
    OP

    Newcomer zaz22 Member

    Joined:
    Oct 1, 2007
    Messages:
    13
    Country:
    New Zealand
    when i get home today i'll try just .iso and see, if that don't work wbfs_file utility. Do you think it may be due to the layer break or something? I'm guessing you are using fat 32?
     
  15. hyr8

    Newcomer hyr8 Member

    Joined:
    Feb 3, 2010
    Messages:
    12
    Country:
    United States
    i don't know really why does this happen, since the only dual-layer game that i have is ssbb.
    and oh, i'm using ntfs, only one .wbfs file, but i don't think that fat32 might be the problem at all.
     
  16. zaz22
    OP

    Newcomer zaz22 Member

    Joined:
    Oct 1, 2007
    Messages:
    13
    Country:
    New Zealand
    ok i added the .iso into there and i got it to play intro music but as soon as i load on 222 or 223 screen just goes black. Any ideas? btw i used to play this off disc and worked fine

    Ok it's working now had to force pal [​IMG] sometimes it plays slow any one have this problem?
     
  17. hyr8

    Newcomer hyr8 Member

    Joined:
    Feb 3, 2010
    Messages:
    12
    Country:
    United States
    no, here everything plays fine, no slowdowns or anything like. don't know, maybe a bad dump ?
     
  18. kingdawn

    Newcomer kingdawn Newbie

    Joined:
    Oct 17, 2009
    Messages:
    7
    Country:
    United States
    Yes, I have the same problem.
    I'm using cfg loader 52b3, cios 249 v17, cios 222 v4.
    And I redump the SSBB, the same problem still.
     
  19. Dispel

    Member Dispel GBAtemp Regular

    Joined:
    Feb 6, 2010
    Messages:
    102
    Country:
    Latvia
    another one here with the same prob

    NTFS HDD, file on HDD is ISO (Wii backup manager 0.3.4r4), CFG v51 & Hermes cIOS v4 .. it gives me 'malloc fst' when i start the game (default is 222 mload) or even when I go to options (thus can't set 223) .. Wii also hangs up .. every single other game is working on default CFG settings (only MP3 needs 223 mload), but of course all of them are single-layer

    maybe backup manager cannot transfer to NTFS in ISO properly if it's DL ? or something .. I've no idea

    from retail disc is fine of course .. I cannot make backup on Wii itself, because NTFS



    what other Windows backup managers are able to transfer a ripped DL SSBB ISO to an NTFS HDD in the same manner as Wii Backup Manager ? maybe they work better
     
  20. Dispel

    Member Dispel GBAtemp Regular

    Joined:
    Feb 6, 2010
    Messages:
    102
    Country:
    Latvia
    eeh u had the Dual-Layer .ISO and converted it to .wbfs format (via this tool) and then put it on your HDD ? and that solved the 'Wbfs panic: malloc fst' for you ?
     

Share This Page