Hardware screen flickering

[Patapon3321]

After I removed the P13USB IC, I let the switch charged for a bit and power it on and everything worked fine. I have tested it for max 1 min(no games/no joycons just touchscreen input).
After my little sis came back I showed her that i repaired my switch, just with the issue that TV-Mode doesnt work yet.
After some secons we both realized that my screen is flickering/flashing like this (Is my switch):

Btw the video is on the half on slowmo.

Maybe is it he LCD cable. Pichtures:

#

What do u think guys. Is this because the P13USB is missing,cable/lcd broken or something else?

 

[nero99]

try replacing the p13usb to see if that fixes it. if it doesn't, that's either a bad lcd or the connector is missing a pin.

 

[Patapon3321]

Okay I will replace the P13USB and hope it will work.
But here a picture of my LCD fpc:

Is this a bended/missing pin?

 

[Patapon3321]

Replaced the P13USB but didnt help

 

[SlegBE]

Yes it is a bended pin. You can try to straighten it but it is very weak and tricky.

 

[seidolino]

hey! I just removed the FPC with a hot air gut (yes it's melting), since I wasn't able to correct the pin, and then I replaced it carefully with one of these with my solder ion: https://de.aliexpress.com/item/32954021965.html?spm=a2g0s.9042311.0.0.27424c4dIbUx7G

 

[Testo]

I had bent pins on that connectors twice,you could try to bend it back to its place with a needle. This worked fine for me