Hi, I am not sure if this is a hardware or system software error. Whenever I open the Daily Log, it works fine for a while then soon it will crash with a 160-0103 error. It so far has not happened with any other game or app, so I am suspecting the Daily Log software has somehow been corrupted. I have a modded Wii U (Aroma, Tiramisu). Is there any way to re-install the Daily Log app in order to check where the issue lies?
I would start from here and getting the system logs out for analysis. If the WiiU is in early stages of nandrot, the rednand and other corrective options are easier to do.
Thanks both , I'll try those suggestions and post back with my findings.
Post automatically merged:
Hi, this is the latest log following the crash:
2025-02-13 12:45:02
Cafe OS SDK Version 2.13.01 Build 69088 Branch sdk_2_13
Espresso: 0x0000700100000201
Latte: 0x0000409f
System mode: 0x100000
Boot flags: 0xc810000
Security Level: 0x1e
Key Type: 0xfffffffc
Prod Version: 0x5
Serial: 105039004
Model: WUP-101(03)
Prod Area: 0x4
Game Area: 0x4
5GHz Code: 0x18
BOOT1: 0x20b9
DRH: 0x190c
BT: 0x205
+0x000500301001120a:0x00000064
+0x000500301001020a:0x000000b4
+0x000500101004e200:0x00000081
-0x000500101004e200:0x00000081
+0x0005001010040200:0x00000101
-0x0005001010040200:0x00000101
+0x000500101004e200:0x00000081
-0x000500101004e200:0x00000081
+0x0005001010040200:0x00000101
-0x0005001010040200:0x00000101
+0x000500101004c200:0x00000035
) content_redirect][ export.cpp] CRAddFSLayer@L0100: ##INFO ## Redirecting "/vol/content" to "wuhbrom:/content", mode: "replace"
00;01;59;546: [(M) content_redirect][ export.cpp] CRAddFSLayer@L0118: ##INFO ## Redirecting "/vol/save" to "fs:/vol/external01/wiiu/apps/save/E3C296ED (WiiUCrashLogDumper)", mode: "replace"
00;01;59;546: Running WiiUPluginLoaderBackend v0.3.4
00;01;59;596: WARNING - AXInit is deprecated; use AXInitWithParams instead.
00;01;59;604: AXIST thread has stopped
00;01;59;604: WPAD: Application Init
00:02:02:431: MCP: PID 10 requested to enable power transitions
00:02:02:431: MCP_PowerButtonControl(1) returned 0
00:02:26:697: MCP: PID 14 requested to disable power transitions
00;02;26;577: DRC HOME Button Pressed!
00;02;26;577: __set_button_state : setting state to 3
00;02;26;586: ProcUI: Received Release Foreground message
00;02;26;603: ProcUI: Releasing foreground
00;02;26;678: port 0 detached
00;02;26;719: ------------------PROCESS 15 LOST FOREGROUND--------------------
00;02;26;720: KiCblRegisterBlocks() completed with status 0:-4.
00;02;26;720: ------------------PROCESS 5 GAIN FOREGROUND--------------------
00:02:26:851: ccr_hid_input_start: idx 0 controller: 0, ep 3 int req --> 0
00;02;26;731: port 0 attached
00;02;26;733: DRC HOME Button Pressed!
00;02;26;733: __set_button_state : setting state to 3
00;02;26;771: TCL(5): init DONE
00;02;26;777: VPADInit() depricated, no need to call
00:02:26:932: MCP: PID 14 requested to enable power transitions
00;02;26;812: ProcUI: Received Acquire Foreground message
00:02:27:143: FSA: *WARNING!* Data buffer for read request from pid 0xc is not aligned on a 64-byte boundary.
FSA: It should be 64-byte aligned for file system performance.00:02:27:170: IM: home button was pressed by type: IM_PAD_TYPE_WIIU_DRC index: 0
00;02;27;050: ==== sysapp:dump data 0 ====
00;02;27;050:
00;02;31;241:
Querying BSP for Hardware Information...
00;02;31;241: It is not Holly/Bolly-Wood
00;02;31;241: It is Latte A2x or later
00;02;31;241: using DSP memory parameters:
00;02;31;241: DROM_BASE: 0x3000
00;02;31;241: IRAM_SIZE: 0x2000
00;02;31;241: DRAM_SIZE: 0x3000
00:02:31:393: MCP: PID 14 requested to disable power transitions
00;02;31;274: DIAG:Issued KiPrepareTitleAsync(0xFFFFFFFFFFFFFFFD)
00:02:31:447: MCP: loaded and parsed 'preload.txt' at '/vol/storage_mlc01/sys/title/00050010/10040200/code'
00:02:31:447: MCP: Preparing men.rpx
00;02;31;334: DIAG:Result PrepareTitle(0xFFFFFFFFFFFFFFFD) came back with cosxml(0x0005001010040200)
00;02;31;334:
***PPC FAST CYCLE***
00;02;31;334: SHUTINFO: RAMPID 5 is in Foreground
00;02;31;334: SHUTINFO: RAMPID 0 is also alive.
00;02;31;334: SHUTINFO: RAMPID 1 is also alive.
00;02;31;334: SHUTINFO: RAMPID 6 is also alive.
00;02;31;334: SHUTINFO: RAMPID 7 is also alive.
00;02;31;334: p15c2 EXIT message retrieved from system queue. main() should exit.
00;02;31;339: ProcUI: Received Exit message
00;02;31;340: ProcUI: Received Release Foreground message (shutdown has begun)
00;02;31;355: [(M) content_redirect][ export.cpp] CRRemoveFSLayer@L0146: ##WARN ## CONTENT_REDIRECTION_API_ERROR_LAYER_NOT_FOUND for handle 8003B9C0
00;02;31;355: [(M) content_redirect][ export.cpp] CRRemoveFSLayer@L0146: ##WARN ## CONTENT_REDIRECTION_API_ERROR_LAYER_NOT_FOUND for handle 8003BC00
00;02;31;355: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
INFO: nn::ipc avoided busy close on /dev/acp_main (moduleId = 301, tag = 0) from pid = 21
00;02;31;369: +OSDrivers_Done(p15,c2)
00;02;31;369: +OSDrivers_Done(p15,c0)
00;02;31;369: +OSDrivers_Done(p15,c1)
00;02;31;369: >x(15, 1)"TEST"
00;02;31;369: <x(15, 1)"TEST" 0 ms
00;02;31;369: >x(15, 1)"Button"
00;02;31;369: <x(15, 1)"Button" 0 ms
00;02;31;370: >x(15, 1)"Clipboard"
00;02;31;370: <x(15, 1)"Clipboard" 0 ms
00;02;31;370: >x(15, 1)"ACP"
00;02;31;380: <x(15, 1)"ACP" 10 ms
00;02;31;380: >x(15, 1)"ACPLoad"
00;02;31;380: <x(15, 1)"ACPLoad" 0 ms
00;02;31;380: >x(15, 1)"INPT"
00;02;31;380: <x(15, 1)"INPT" 0 ms
00;02;31;380: >x(15, 1)"ProcUI"
00;02;31;380: <x(15, 1)"ProcUI" 0 ms
00;02;31;380: >x(15, 1)"AVM"
00;02;31;380: <x(15, 1)"AVM" 0 ms
00;02;31;380: >x(15, 1)"VPAD"
00;02;31;381: <x(15, 1)"VPAD" 0 ms
00;02;31;381: >x(15, 1)"WPAD"
00;02;31;381: <x(15, 1)"WPAD" 0 ms
00;02;31;381: >x(15, 1)"TCL"
00;02;31;381: <x(15, 1)"TCL" 0 ms
00;02;31;381: >x(15, 1)"CCR"
00;02;31;381: <x(15, 1)"CCR" 0 ms
00;02;31;381: >x(15, 1)"FS"
Fsa profiler has been disabled already.
00;02;31;381: <x(15, 1)"FS" 0 ms
00;02;31;381: >x(15, 1)"SETTING"
00;02;31;383: <x(15, 1)"SETTING" 2 ms
00;02;31;383: >x(15, 1)"IPC"
00:02:31:542: AUXIL Info: fast relaunch.
00;02;31;417: ABANDONED ORPHANED DEFERRRED IPC REPLY FOR PROCESS 7
00;02;31;417: ABANDONED ORPHANED DEFERRRED IPC REPLY FOR PROCESS 7
00;02;31;418: <x(15, 1)"IPC" 34 ms
00;02;31;418: >x(15, 1)"Cache"
00;02;31;418: <x(15, 1)"Cache" 0 ms
00;02;31;418: >x(15, 1)"MEM"
00;02;31;418: <x(15, 1)"MEM" 0 ms
00;02;31;418: -OSDrivers_Done(p15,c1)
00;02;31;418: -OSDrivers_Done(p15,c2)
00;02;31;418: -OSDrivers_Done(p15,c0)
00;02;31;420: +IPCKDriver_Cleanup(7)
00;02;31;420: -IPCKDriver_Cleanup(7)
00;02;31;574: ProcUI: Releasing foreground
00;02;31;650: port 0 detached
00;02;31;695: ------------------PROCESS 5 LOST FOREGROUND--------------------
00;02;31;696: KiCblRegisterBlocks() completed with status 0:-4.
00;02;31;696: ------------------PROCESS 1 GAIN FOREGROUND--------------------
00:02:31:860: ccr_hid_input_start: idx 0 controller: 0, ep 3 int req --> 0
00;02;31;740: TCL(1): init DONE
00;02;31;741: port 0 attached
00;02;31;753: VPADInit() depricated, no need to call
00;02;31;758: sMasterTitleSwitchedToExit
00;02;31;758: ROOT: Issuing reboot.
00;02;31;768: ROOT: Waiting for EXIT message or RECYCLE message
00;02;31;768: ---Root Invoking Recycle---
00:02:31:902: MCP: PID 14 requested to enable power transitions
00:02:31:902: MCP: PID 10 requested to disable power transitions
00:02:31:903: MCP_PowerButtonControl(0) returned 0
00;02;31;782:
---PPC USER-LEVEL FAST RESTART---
00;02;31;782: New master title is a CafeMenu(0x90000001)
00;02;31;782: MASTER TITLE ON FLASH
00:02:32:086: MCP: PID 14 requested to disable power transitions
00;02;31;966:
-----------------------------
ROOT IS STARTING MASTER TITLE
-----------------------------
00;02;31;966: TEST COOKIE: YOSHI-1992-11-21-00-00-00
00;02;31;967: DIAG:Issued KiPrepareTitleAsync(0xFFFFFFFFFFFFFFFD)
00:02:32:133: MCP: loaded and parsed 'preload.txt' at '/vol/storage_mlc01/sys/title/00050010/10040200/code'
00:02:32:133: MCP: Preparing men.rpx
00:02:32:136: MCP: Mapping /vol/content to /vol/storage_mlc01/sys/title/00050010/10040200/content
00:02:32:140: MCP: Link title:0x0005001010040200 file:/vol/content/Common/Package/Men.pack to ramdisk:/vol/sys/proc_ram/cache/Men.pack
00:02:32:140: MCP: 0005001010040200 is not a demo title, skip increment demo launch count
00:02:32:140: MCP: Mapping /vol/content to /vol/storage_mlc01/sys/title/00050010/10040200/content
00;02;32;015: DIAG:Result PrepareTitle(0xFFFFFFFFFFFFFFFD) came back with cosxml(0x0005001010040200)
00;02;32;022: TitleId 0x0005001010040200 Version 0x00000101 Built On SDK 21211
00;02;32;076: port 0 detached
00;02;32;117: ------------------PROCESS 1 LOST FOREGROUND--------------------
00;02;32;117: DIAG: PhysAlloc(2, 0x40000000, 0x00000000, 0x00000000, 0x02300000, 0x00000001)
00;02;32;117: DIAG: InitAddrSpace
00;02;32;118: DIAG: Switch(New)
00;02;32;118: DIAG:+Loader(1, 7)
00;02;32;118: DIAG:+KiRPLLoaderSetup
00;02;32;118: DIAG:-KiRPLLoaderSetup: before no-return call to KiLoadContext (0xEFE09400) (0x01003FFC)
00;02;32;118: Title Loc is 0
[ mcp_loadfile.c] MCP_LoadCustomFile@L0180: Trying to load .rpx from custom path "/vol/storage_iosu_homebrew/wiiu/environments/aroma/men.rpx"
[ mcp_loadfile.c] MCP_LoadCustomFile@L0184: MCP_DoLoadFile returned -196631, bytesRead = 0 pos 0
00:02:32:440: MCP: PID 14 requested to enable power transitions
00;02;32;320: DIAG:-Loader(1, 7)
00;02;32;320: DIAG: SetFG(7)
00;02;32;320: KiCblRegisterBlocks() completed with status 0:-4.
00;02;32;320: ------------------PROCESS 2 GAIN FOREGROUND--------------------
00;02;32;322: SYSLOG_LEVEL 1: Warnings Enabled
00;02;32;322: UserMode Core & Thread Initialization (3 Cores)
00;02;32;322: Core 1 Complete, Default Thread 0x100457E0
00;02;32;324: Core 0 Complete, MSR 0x00005072, Default Thread 0x10045140
00;02;32;325: Core 2 Complete, MSR 0x00005072, Default Thread 0x10045E80
00;02;32;348: UserMode OS library build date: Feb 4 2021 16:38:58
00;02;32;348: __AppFlags: 0x00000200
00;02;32;348: OSBlockThreadsOnExit default for sdk version 21211
00;02;32;675: SYSAPP: RPL Load
00;02;32;675: mic_core0_thread: master init
00;02;32;693: OSSetting_SynchronousPrinting DISABLED
00;02;32;697: OSSetting_CrashDumpType 0, MINI dump after crash
00:02:32:853: ccr_hid_input_start: idx 0 controller: 0, ep 3 int req --> 0
00;02;32;732: TCL(2): init DONE
00;02;32;733: VPADInit() depricated, no need to call
00;02;32;733: port 0 attached
00;02;32;734: VPAD Init end, BPERF: (0/152853760) Title PID=2
SPM: SetManualMode
00;02;32;771: mic_drc_attach_cb: ch 0 reason 1 flags 0x00040100
00;02;32;772: ACP_AutoInit: start
00;02;32;869: ACP_AutoInit: ACPInitialize complete
00;02;32;869: ACP_AutoInit: ACPSaveDataInit complete
00;02;32;873: ACP_AutoInit: ACPNotifyPlayEvent complete
00;02;32;875: ACP_AutoInit: NDMInitialize complete
00;02;33;176: ACP: initialized
00;02;33;185: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;02;33;185: Running WUMSLoader v0.2.6
00;02;33;196: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;02;33;196: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;02;33;197: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;02;33;197: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;02;33;198: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;02;33;198: Running KernelModule v0.2.2
00;02;33;198: Running FunctionPatcherModule v0.2.3
00;02;33;204: Running MemoryMappingModule v0.2.6
00;02;33;205: Running PatchMemoryRelocationsModule v0.1.2
00;02;33;205: Running AromaBaseModule v0.2.5
00;02;33;205: Running CURLWrapperModule v0.1.2
00;02;33;205: Running SDHotSwapModule v0.1.1
00;02;33;222: Running WUHBUtilsModule v0.1.3
00;02;33;222: Running NotificationModule v0.1.3
00;02;33;222: Running ContentRedirectionModule v0.2.7
00;02;33;222: Running RPXLoadingModule v0.3.4
00;02;33;288: Running WiiUPluginLoaderBackend v0.3.4
00;02;33;305: [(P) homebrew_on_menu][ main.cpp] on_app_starting@L0306: ##INFO ## No ignore found
00:02:33:474: ACP: Mounting "/vol/save/" on "/vol/storage_mlc01/usr/save/00050010/10040200/user/"
00:02:33:475: ACP: Mount done (0)
00;02;33;345: [barista] Product {rogram=>39236, :message=>46124, rogramProj=>39239, :root=>39240, :sead=>37528, :resource=>39222}
00;02;33;345: [barista] Cafe OS SDK Version 2.12.11 Build 66642 Branch
00;02;33;345: ### Application Start Time [12:47:31] ###
00;02;33;345: =================================
MEM_ARENA_2: total free size = 989763(KB), 966(MB)
=================================
00;02;33;376: [(M) content_redirect][ export.cpp] CRAddFSLayer@L0127: ##INFO ## Redirecting "/vol/save/80000019" to "fs:/vol/external01/wiiu/homebrew_on_menu_plugin/FEM105039004/save/80000019", mode: "replace"
00;02;33;393: WPAD: Application Init
00;02;34;504: rpl_entry
00;02;34;504: OSDynLoad_Acquire() use [2701564]
00;02;34;504: ErrEula: client version 3.
00;02;34;504: ErrEula: thread=0x4c606540, stackSize= 64 KB, stackBase=0x4c60652c, stackEnd=0x4c5f652c (ErrEulaCreate)
00;02;35;067: == sysapp == new path
00;02;35;067: ==== sysapp:dump data 102 ====
00;02;35;067: 0 <sys:caller_id size=8>HomeButtonMenu<sys:caller_process size=14>mlc <sys:caller_device size=4>
00;02;35;067: ==== sysapp:dump data 0 ====
00;02;35;067:
00;02;35;110: ==== sysapp:dump data 0 ====
00;02;35;110:
00:02:35:864: FSA: *WARNING!* Data buffer for read request from pid 0xc is not aligned on a 64-byte boundary.
FSA: It should be 64-byte aligned for file system performance.DRMAPP: built Feb 4 2021 16:43:44
00;02;35;926: [(P)WiiVCLaunch][ main.cpp] my_MCP_TitleList@L0200: ##INFO ## Patching MCP_TitleList in Wii U Menu
00:02:36:795: MCP: PID 10 requested to enable power transitions
00:02:36:796: MCP_PowerButtonControl(1) returned 0
00;02;37;667: [(P)WiiVCLaunch][ main.cpp] my_MCP_TitleList@L0200: ##INFO ## Patching MCP_TitleList in Wii U Menu
00;04;14;502: ACP: detecting USB storage in CheckTitleLaunchByTitleListType.
00;04;14;503: ACP: USB storage detection done in CheckTitleLaunchByTitleListType
00:04:14:743: ACP: set boot flag: 0x00000000
00;04;15;448: ACP: detecting USB storage in AssignTitlePatch.
00;04;15;449: ACP: USB storage detection done in AssignTitlePatch
00;04;15;708:
Querying BSP for Hardware Information...
00;04;15;708: It is not Holly/Bolly-Wood
00;04;15;708: It is Latte A2x or later
00;04;15;708: using DSP memory parameters:
00;04;15;708: DROM_BASE: 0x3000
00;04;15;708: IRAM_SIZE: 0x2000
00;04;15;708: DRAM_SIZE: 0x3000
00:04:16:390: MCP: PID 14 requested to disable power transitions
00:04:16:444: MCP: loaded and parsed 'preload.txt' at '/vol/storage_mlc01/sys/title/00050010/1004c200/code'
00:04:16:444: MCP: Preparing ply.rpx
00;04;16;330: DIAG:Result PrepareTitle(0x0000000000000000) came back with cosxml(0x000500101004C200)
00;04;16;331:
***PPC FAST CYCLE***
00;04;16;331: SHUTINFO: RAMPID 7 is in Foreground
00;04;16;331: SHUTINFO: RAMPID 0 is also alive.
00;04;16;331: SHUTINFO: RAMPID 1 is also alive.
00;04;16;331: SHUTINFO: RAMPID 5 is also alive.
00;04;16;331: SHUTINFO: RAMPID 6 is also alive.
00;04;16;331: p2 received EXIT while in foreground.
00;04;16;341: ProcUI: Received Release Foreground message (shutdown has begun)
00;04;16;383: ProcUI: Releasing foreground
00;04;16;433: mic_drc_attach_cb: ch 0 reason 0 flags 0x00000000
00;04;16;474: port 0 detached
00;04;16;520: Deferred Exit Process 2 - pushing exit message on release.
00;04;16;520: p2c1,de EXIT message pushed to system queue.
00;04;16;520: ------------------PROCESS 2 LOST FOREGROUND--------------------
00;04;16;521: KiCblRegisterBlocks() completed with status 0:-4.
00;04;16;521: ------------------PROCESS 1 GAIN FOREGROUND--------------------
00;04;16;521: p2c2 EXIT message retrieved from system queue. main() should exit.
00;04;16;521: ProcUI: Received Exit message
DRMAPP: Finalize
00:04:16:694: ccr_hid_input_start: idx 0 controller: 0, ep 3 int req --> 0
00;04;16;572: TCL(1): init DONE
00;04;16;573: port 0 attached
00;04;16;603: VPADInit() depricated, no need to call
00;04;16;615: sMasterTitleSwitchedToExit
00;04;16;615: ROOT: Issuing reboot.
00;04;16;627: ROOT: Waiting for EXIT message or RECYCLE message
00;04;16;629: [(P) wiiload][ TcpReceiver.cpp] executeThread@L0133: ##WARN ## Accept failed 140
00;04;16;769: ### Application Exit Time [12:49:14] ###
00;04;16;771: [(M) content_redirect][ export.cpp] CRRemoveFSLayer@L0146: ##WARN ## CONTENT_REDIRECTION_API_ERROR_LAYER_NOT_FOUND for handle 8003D140
00;04;16;771: [(P) homebrew_on_menu][ SaveRedirection.cpp] SaveRedirectionCleanUp@L0040: ##ERROR## Failed to remove save FSLayer
00;04;16;831:
!!WARNING - main() exited with an active thread 0x4C606540 [prio = 81] "Prepare Thread"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x11BEAEE8 [prio = 80] "WorkerMgr/Worker1(cSub1)"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x11BEF778 [prio = 80] "WorkerMgr/Worker2(cSub2)"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x11BA0AF8 [prio = 81] "InitInRootTask"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x1322B970 [prio = 82] "UpdateScalableFont"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x14130548 [prio = 82] "MenUsbStorageChecker"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x22A67138 [prio = 81] "LaunchCoreCheckUpdate"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x274FE0A8 [prio = 83] "FPCheckOnline"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x2750E7C0 [prio = 83] "FPUpdateRequestList"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x27A23AA0 [prio = 83] "AccountMgrThread"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x28419000 [prio = 81] "MenSwkbdCalculator_Create"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x28429788 [prio = 81] "MenSwkbdCalculator_Font"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x28439EE8 [prio = 82] "MenSwkbdCalculator_Predict"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x28471518 [prio = 83] "NetThread"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x2FEE89B0 [prio = 83] "MiiThread"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x349FB460 [prio = 83] "TexCreate"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x365E7688 [prio = 82] "LateLoader"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x383081B0 [prio = 81] "MiiSaveJob"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x38E693B8 [prio = 81] "Loginout"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x3940F2B8 [prio = 84] "EulaThred"
00;04;16;831:
!!WARNING - main() exited with an active thread 0x39899890 [prio = 81] "SeqLaunchPushRating"
00;04;16;831: +OSDrivers_Done(p2,c1)
00;04;16;831: +OSDrivers_Done(p2,c0)
00;04;16;831: +OSDrivers_Done(p2,c2)
00;04;16;832: __OSShutdownIdleBegin()
00;04;16;832: __OSSetMaxSchedulingBand 1
00;04;16;832: >x(2, 1)"TEST"
00;04;16;832: <x(2, 1)"TEST" 0 ms
00;04;16;832: >x(2, 1)"Button"
00;04;16;832: <x(2, 1)"Button" 0 ms
00;04;16;832: >x(2, 1)"Clipboard"
00;04;16;832: <x(2, 1)"Clipboard" 0 ms
00;04;16;832: >x(2, 1)"ACP"
00;04;16;845: <x(2, 1)"ACP" 13 ms
INFO: nn::ipc avoided busy close on /dev/acp_main (moduleId = 301, tag = 0) from pid = 21
00;04;16;845: >x(2, 1)"ACPLoad"
00;04;16;845: <x(2, 1)"ACPLoad" 0 ms
00;04;16;845: >x(2, 1)"INPT"
00;04;16;845: <x(2, 1)"INPT" 0 ms
00;04;16;846: >x(2, 0)"ccr_mic"
00;04;16;846: <x(2, 0)"ccr_mic" 0 ms
00;04;16;846: >x(2, 1)"NTAG"
00;04;16;846: <x(2, 1)"NTAG" 0 ms
00;04;16;846: >x(2, 1)"UVD"
00;04;16;877: <x(2, 1)"UVD" 31 ms
00;04;16;877: >x(2, 1)"GX2"
00;04;16;877: <x(2, 1)"GX2" 0 ms
00;04;16;877: >x(2, 1)"ProcUI"
00;04;16;877: <x(2, 1)"ProcUI" 0 ms
00;04;16;877: >x(2, 1)"UHS"
00;04;16;877: <x(2, 1)"UHS" 0 ms
00;04;16;877: >x(2, 1)"AVM"
00;04;16;877: <x(2, 1)"AVM" 0 ms
00;04;16;877: >x(2, 1)"VPAD"
00;04;16;878: <x(2, 1)"VPAD" 0 ms
00;04;16;878: >x(2, 1)"WPAD"
00;04;16;878: <x(2, 1)"WPAD" 0 ms
00;04;16;878: >x(2, 1)"NETWORK"
00;04;16;878: <x(2, 1)"NETWORK" 0 ms
00;04;16;878: >x(2, 1)"CCR"
00;04;16;878: <x(2, 1)"CCR" 0 ms
00;04;16;879: >x(2, 1)"TCL"
00;04;16;879: <x(2, 1)"TCL" 0 ms
00;04;16;879: >x(2, 1)"FS"
Fsa profiler has been disabled already.
00;04;16;879: <x(2, 1)"FS" 0 ms
00;04;16;879: >x(2, 1)"SETTING"
00;04;16;879: <x(2, 1)"SETTING" 0 ms
00;04;16;879: >x(2, 1)"IPC"
00;04;16;880: ABANDONED ORPHANED IPC REPLY FOR RAMPID 7
00;04;16;881: ABANDONED ORPHANED IPC REPLY FOR RAMPID 7
00;04;16;923: ABANDONED ORPHANED IPC REPLY FOR RAMPID 7
00;04;16;924: <x(2, 1)"IPC" 45 ms
00:04:17:045: MCP: Unlink title:0x0005001010040200 file:/vol/content/Common/Package/Men.pack from ramdisk:/vol/sys/proc_ram/cache/Men.pack
00:04:17:048: AUXIL Info: fast relaunch.
00;04;16;924: >x(2, 1)"Cache"
00;04;16;924: <x(2, 1)"Cache" 0 ms
00;04;16;925: >x(2, 1)"MEM"
00;04;16;925: <x(2, 1)"MEM" 0 ms
00;04;16;925: -OSDrivers_Done(p2,c1)
00;04;16;925: -OSDrivers_Done(p2,c0)
00;04;16;925: -OSDrivers_Done(p2,c2)
00;04;16;928: +IPCKDriver_Cleanup(7)
00;04;16;928: -IPCKDriver_Cleanup(7)
00;04;16;928: ---Root Invoking Recycle---
00:04:17:062: MCP: PID 14 requested to enable power transitions
00:04:17:063: MCP: PID 10 requested to disable power transitions
00:04:17:064: MCP_PowerButtonControl(0) returned 0
00;04;16;943:
---PPC USER-LEVEL FAST RESTART---
00;04;16;943: New master title is a Game(0x90000020)
00;04;16;943: MASTER TITLE ON FLASH
00:04:17:247: MCP: PID 14 requested to disable power transitions
00;04;17;127:
-----------------------------
ROOT IS STARTING MASTER TITLE
-----------------------------
00;04;17;127: TEST COOKIE: YOSHI-1992-11-21-00-00-00
00:04:17:295: MCP: loaded and parsed 'preload.txt' at '/vol/storage_mlc01/sys/title/00050010/1004c200/code'
00:04:17:295: MCP: Preparing ply.rpx
00;04;17;176: DIAG:Result PrepareTitle(0x0000000000000000) came back with cosxml(0x000500101004C200)
00:04:17:613: MCP: Mapping /vol/content to /vol/storage_mlc01/sys/title/00050010/1004c200/content
00:04:17:614: MCP: 000500101004C200 is not a demo title, skip increment demo launch count
00:04:17:614: MCP: Mapping /vol/content to /vol/storage_mlc01/sys/title/00050010/1004c200/content
00;04;17;496: TitleId 0x000500101004C200 Version 0x00000035 Built On SDK 20910
00;04;17;564: port 0 detached
00;04;17;605: ------------------PROCESS 1 LOST FOREGROUND--------------------
00;04;17;605: DIAG: PhysAlloc(15, 0x40000000, 0x00000000, 0x00000000, 0x02000000, 0x00000001)
00;04;17;605: DIAG: InitAddrSpace
00;04;17;606: DIAG: Switch(New)
00;04;17;606: DIAG:+Loader(1, 7)
00;04;17;606: DIAG:+KiRPLLoaderSetup
00;04;17;606: DIAG:-KiRPLLoaderSetup: before no-return call to KiLoadContext (0xEFE09400) (0x01003FFC)
00;04;17;606: Title Loc is 0
00:04:17:841: MCP: PID 14 requested to enable power transitions
00;04;17;721: DIAG:-Loader(1, 7)
00;04;17;721: DIAG: SetFG(7)
00;04;17;722: KiCblRegisterBlocks() completed with status 0:-4.
00;04;17;722: ------------------PROCESS 15 GAIN FOREGROUND--------------------
00;04;17;723: SYSLOG_LEVEL 1: Warnings Enabled
00;04;17;723: UserMode Core & Thread Initialization (3 Cores)
00;04;17;723: Core 1 Complete, Default Thread 0x100457E0
00;04;17;725: Core 0 Complete, MSR 0x00005072, Default Thread 0x10045140
00;04;17;726: Core 2 Complete, MSR 0x00005072, Default Thread 0x10045E80
00;04;17;749: UserMode OS library build date: Feb 4 2021 16:38:58
00;04;17;749: __AppFlags: 0x00000200
00;04;17;750: OSBlockThreadsOnExit default for sdk version 20910
00;04;17;916: SYSAPP: RPL Load
00;04;17;934: OSSetting_SynchronousPrinting DISABLED
00;04;17;938: OSSetting_CrashDumpType 0, MINI dump after crash
00:04:18:094: ccr_hid_input_start: idx 0 controller: 0, ep 3 int req --> 0
SPM: SetManualMode
00;04;17;973: TCL(15): init DONE
00;04;17;974: VPADInit() depricated, no need to call
00;04;17;974: port 0 attached
00;04;17;975: VPAD Init end, BPERF: (0/258094887) Title PID=15
00;04;17;975: mic_drc_attach_cb: ch 0 reason 1 flags 0x00040100
00;04;17;976: ACP_AutoInit: start
00;04;18;069: ACP_AutoInit: ACPInitialize complete
00;04;18;069: ACP_AutoInit: ACPSaveDataInit complete
00;04;18;073: ACP_AutoInit: ACPNotifyPlayEvent complete
00;04;18;075: ACP_AutoInit: NDMInitialize complete
00;04;18;076: ACP: initialized
00;04;18;086: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;04;18;086: Running WUMSLoader v0.2.6
00;04;18;097: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;04;18;097: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;04;18;098: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;04;18;098: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;04;18;098: [(M) content_redirect][ FSAReplacements.cpp] processFSAShimInThread@L0053: ##WARN ## Threads are not running yet, skip replacement
00;04;18;099: Running KernelModule v0.2.2
00;04;18;099: Running FunctionPatcherModule v0.2.3
00;04;18;104: Running MemoryMappingModule v0.2.6
00;04;18;105: Running PatchMemoryRelocationsModule v0.1.2
00;04;18;105: Running AromaBaseModule v0.2.5
00;04;18;105: Running CURLWrapperModule v0.1.2
00;04;18;105: Running SDHotSwapModule v0.1.1
00;04;18;122: Running WUHBUtilsModule v0.1.3
00;04;18;122: Running NotificationModule v0.1.3
00;04;18;122: Running ContentRedirectionModule v0.2.7
00;04;18;122: Running RPXLoadingModule v0.3.4
00;04;18;188: Running WiiUPluginLoaderBackend v0.3.4
00:04:18:366: ACP: Mounting "/vol/save/" on "/vol/storage_mlc01/usr/save/00050010/1004c200/user/"
00:04:18:367: ACP: Mount done (0)
00;04;18;240: ### Application Start Time [12:49:16] ###=================================
free size = 1002808(KB), 979(MB)
=================================
00;04;18;264: WPAD: Application Init
00;04;19;452: rpl_entry
00;04;19;452: OSDynLoad_Acquire() use [2701596]
00;04;19;452: ErrEula: thread=0x4bc49080, stackSize= 64 KB, stackBase=0x4bc4906c, stackEnd=0x4bc3906c (ErrEulaCreate)
00:04:20:097: FSA: *WARNING!* Data buffer for read request from pid 0xc is not aligned on a 64-byte boundary.
FSA: It should be 64-byte aligned for file system performance.00:04:21:696: MCP: PID 10 requested to enable power transitions
00:04:21:696: MCP_PowerButtonControl(1) returned 0
00:04:41:444: FSA: ### DATA CORRUPTION ERROR ###, dev:mlc01, err:-1245211, cmd:11, pathnull)
00:04:41:460: FSA: ### DATA CORRUPTION ERROR ###, dev:mlc01, err:-1245211, cmd:11, pathnull)
00:04:41:476: FSA: ### DATA CORRUPTION ERROR ###, dev:mlc01, err:-1245211, cmd:11, pathnull)
00:04:41:491: FSA: ### DATA CORRUPTION ERROR ###, dev:mlc01, err:-1245211, cmd:11, pathnull)
00:04:41:507: FSA: ### DATA CORRUPTION ERROR ###, dev:mlc01, err:-1245211, cmd:11, pathnull)
00;04;41;388: FS: READ_FILE upid:[15] sts:[DATA_CORRUPTED] hnd:[0x3be09dd] dst:[0x2274c740] size:[1] cnt:[163840] pos:[0]
00;04;41;388: SystemFatal(core0)
00;04;41;388: Aborting/Abandoning Driver "SNDD_RAMP" (master 15)
00;04;41;388: Aborting/Abandoning Driver "SNDD" (master 15)
00;04;41;388: Aborting/Abandoning Driver "CCR_MIC" (master 2)
00;04;41;388: Aborting/Abandoning Driver "NTAG" (master 2)
00;04;41;388: Aborting/Abandoning Driver "UHS" (master 2)
00;04;41;388: Aborting/Abandoning Driver "KPAD" (master 5)
00;04;41;388: Aborting/Abandoning Driver "WBC" (master 5)
00;04;41;388: Aborting/Abandoning Driver "FS" (master 5)
00;04;41;388: Aborting/Abandoning Driver "SND" (master 5)
00;04;41;388: Aborting/Abandoning Driver "UVD" (master 5)
00;04;41;388: Aborting/Abandoning Driver "ACP" (master 5)
00;04;41;388: Aborting/Abandoning Driver "GX2" (master 1)
00;04;41;388: Aborting/Abandoning Driver "WPAD" (master 1)
00;04;41;388: Aborting/Abandoning Driver "PAD" (master 1)
00;04;41;388: Aborting/Abandoning Driver "CLIPBOARD" (master 1)
00;04;41;388: Aborting/Abandoning Driver "BUTTON" (master 1)
00;04;41;388: Aborting/Abandoning Driver "ACPLOAD" (master 1)
00;04;41;388: Aborting/Abandoning Driver "TEST" (master 1)
00;04;41;388: Aborting/Abandoning Driver "INPT" (master 1)
00;04;41;388: Aborting/Abandoning Driver "SETTING" (master 1)
00;04;41;388: Aborting/Abandoning Driver "IPC" (master 1)
00;04;41;388: Aborting/Abandoning Driver "CACHE" (master 1)
00;04;41;388: Aborting/Abandoning Driver "MEM" (master 1)
00;04;41;388: Aborting/Abandoning Driver "NETWORK" (master 1)
00;04;41;388: Aborting/Abandoning Driver "NSYSUVD" (master 1)
00;04;41;388: Aborting/Abandoning Driver "AVM" (master 1)
00;04;41;388: Aborting/Abandoning Driver "DC" (master 1)
00;04;41;388: Aborting/Abandoning Driver "TCL" (master 1)
00;04;41;389: Aborting/Abandoning Driver "TVE" (master 1)
00;04;41;389: Aborting/Abandoning Driver "VPAD" (master 1)
00;04;41;389: Aborting/Abandoning Driver "CCR" (master 1)
INFO: nn::ipc avoided busy close on /dev/acp_main (moduleId = 301, tag = 0) from pid = 21
00;04;41;514: *** Process 7 exited with interrupt handler for vector 5 registered on core 0.
00;04;41;514: *** Process 7 exited with interrupt handler for vector 6 registered on core 0.
00;04;41;514: *** Process 7 exited with interrupt handler for vector 8 registered on core 0.
00;04;41;514: *** Process 7 exited with interrupt handler for vector 2 registered on core 1.
00;04;41;514: *** Process 7 exited with interrupt handler for vector 3 registered on core 1.
00;04;41;514: *** Process 7 exited with interrupt handler for vector 4 registered on core 1.
00;04;41;987: SystemFatal - Core 1 resume in error display (6)
00;04;41;987: SystemFatal - Core 1 resume in error display (6)
00;04;41;987: SystemFatal - Core 2 resume in error display (6)
00;04;41;987: !!!Abandoned Interrupt 5 for process 65535
00;04;41;987: !!!Abandoned Interrupt 2 for process 65535
00;04;41;987: Process 6 Delayed Start Acquire
00;04;42;005: OSSetting_SynchronousPrinting DISABLED
00;04;42;010: OSSetting_CrashDumpType 0, MINI dump after crash
00;04;42;048: TCL(6): init DONE
00:04:42:345: ccr_hid_input_start: idx 0 controller: 0, ep 3 int req --> 0
00;04;42;225: VPADInit() depricated, no need to call
00;04;42;225: port 0 attached
00;04;42;226: VPAD Init end, BPERF: (0/282345379) Title PID=6
00;04;42;228:
<><><><><><><> fatal error process called <><><><><><><>
00;04;42;228: TYPE: Corruption(2)
00;04;42;228: CODE: 1600103
00;04;42;228: Process: 15
00;04;42;228: Internal Code: 269274536
00;04;42;228: Function __FSCheckAndSwitchErrorProc, Line:141
00;04;42;323: ERPRC: System version: 5.5.5 E
00;04;42;323: ERPRC: Serial number: FEM105039004
00;04;42;323: ERPRC: Model number: WUP-101(03)
00;04;42;337: CSC: Product Code: WUP-N-HAUP, Title Version (major): 3
00;04;42;339: CSC: Repaired: FALSE, Wagon: FALSE
00;04;42;352: CSC: InitialLaunch stage: 2
00;04;42;355: CSC: USB Storage Connected: FALSE, Device Type: NAND
00;04;42;385: CSC: RCA Enabled: FALSE, KeepAlive Enabled: FALSE, ParentControl Enable: FALSE
00;04;42;388: CSC: Check : /vol/storage_mlc01/usr/boss/00050010/1004c200/user/common/ (-196631)
00;04;42;391: CSC: Check : /vol/storage_mlc01/usr/boss/00050010/1004c200/user/80000019/ (0)
00;04;42;402: CSC: Boss Storage Exist: TRUE, NetworkID Assigned: FALSE, System Network Connected: TRUE
00:04:42:563: NET: >>> Received request to kill all sockets.
00:04:42:563: NET: Socket binding (resource: 0x00001a82)
00:04:42:564: NET: Change admin state (1 -> 2)(iface:0 link:1)
2025-02-13 12:49:40 - log collection event from pid 20
00:04:42:576: NET: Change admin state (2 -> 2)(iface:1 link:2)
00:04:42:577: NET: >>> Received request to kill all sockets.
00:04:42:577: NET: Socket binding (resource: 0x00001a82)
00:04:42:578: NET: Change admin state (2 -> 2)(iface:0 link:2)
00:04:42:578: NET: Change admin state (2 -> 2)(iface:1 link:2)
00;04;42;435: CSC: NIC Type: WIFI, DNS obtained by DHCP: TRUE, IP obtained by DHCP: TRUE
00;04;42;440: CSC: TV Port: HDMI, TV Aspect Ratio: 16:9
00;04;42;452: CSC: TV Resolution: TV_1080I
00;04;42;452: CSC: CODE: [HAU3-0210-5374]
00;04;42;452: ERPRC: Console status code: HAU3-0210-5374
00:04:42:583: MCP: life time number of fatal errors - 65
Post automatically merged:
Attached is a zip file of all the logs. I would be grateful if you could let me know what you think as I don't really understand what I'm looking at. Thank you
Seemingly out of nowhere a PC port for Pokemon Platinum has surfaced online, bundled alongside the source code for those interested in building and developing it for...
With very little in the way of announcement, Valve has today increased the price of the Steam Deck but some fairly considerable margins. Both of the available models...
Nintendo's expected Summer showcase is here, offering up plenty of new announcements and exciting reveals. Let's see what they have in store in the latest Nintendo...
Continuing with the great news of Pokémon Platinum getting a native unofficial PC port just a few days ago, today, yet another classic title from the franchise has...
The latest in a growing number of native PC ports, Paper Mario ReCut got its first pre-release build earlier this week. Based on the N64 recompilation toolchain, the...
When you talk about 3DS emulation, most people would jump to Citra. As the defacto choice since its first release it's seen tremendous success, and even after its...
What once seemed like a far off dream, and after many, many community restarts throughout the years, the elusive Mother 1 / EarthBound Beginnings Remake, which is a...
A whole hour of PlayStation content is on the way, thanks to the latest State of Play showcase. Headlining the stream will be Marvel's Wolverine, alongside a...
For the first time in 13 years, the Call of Duty series will again return to Nintendo's consoles. Set to launch on the 23rd of October, the latest release, Modern...
Since being decompiled Super Mario 64 has seen a considerable amount of interest. We've had multiple PC ports, but the efforts beyond that are really astounding. It's...
With very little in the way of announcement, Valve has today increased the price of the Steam Deck but some fairly considerable margins. Both of the available models...
Nintendo's expected Summer showcase is here, offering up plenty of new announcements and exciting reveals. Let's see what they have in store in the latest Nintendo...
After much speculation, a lot of which being caused by dbrand's unceremonious reveal of their Companion Cube casing, the Steam Machine is finally available to order...
Seemingly out of nowhere a PC port for Pokemon Platinum has surfaced online, bundled alongside the source code for those interested in building and developing it for...
With rumours circulating about a Nintendo Direct in the coming days and weeks, fans are left speculating and hoping as to what might be included. At the centre of all...
The latest in a growing number of native PC ports, Paper Mario ReCut got its first pre-release build earlier this week. Based on the N64 recompilation toolchain, the...
A whole hour of PlayStation content is on the way, thanks to the latest State of Play showcase. Headlining the stream will be Marvel's Wolverine, alongside a...
After much speculation and rumour, the fabled Nintendo Direct is upon us. Set to go live tomorrow, the 9th of June, at 3pm in the UK, it'll feature 50 minutes of...
For the first time in 13 years, the Call of Duty series will again return to Nintendo's consoles. Set to launch on the 23rd of October, the latest release, Modern...
Following an investigation over misleading commercial practices, today Nintendo has been imposed a fine of 35 million euros related to the controller malfunctions...
rogram=>39236, :message=>46124, 
