Repairing botched modding

Orca3306

New Member
OP
Newbie
Joined
Sep 6, 2023
Messages
4
Trophies
0
Age
21
XP
18
Country
United States
So I got a Japanese Wii from someone that they had taken to someone to mod for them. I have no clue what that person before me was smoking because the homebrew channel launches directly into a version of Wii64 that crashes the console if you do anything.

I tried going to the settings to do a fresh install of the homebrew channel but it gave me a pop up in English saying that it couldn’t connect to an address and to try making sure my internet connection is active. I have worked on a ton of Japanese Wiis in the past and never once gotten this error before. I saw another thread on here from about a decade away suggesting it was a botched attempted at region changing the Wii and to fix it with any region changer. Great fix but like I said, the genius before me didn’t leave the homebrew channel on it so I’m kinda left high and dry. I should also mention all the other text on the console is in Japanese besides the labels for the wad channel the previous person installed

Is there anything I can do to fix this or do I just have to tell him that it’s a lost cause?
 

SylverReZ

The planet is fine. The people are crazy.
Member
Joined
Sep 13, 2022
Messages
7,277
Trophies
3
Location
The Wired
Website
m4x1mumrez87.neocities.org
XP
22,355
Country
United Kingdom
So I got a Japanese Wii from someone that they had taken to someone to mod for them. I have no clue what that person before me was smoking because the homebrew channel launches directly into a version of Wii64 that crashes the console if you do anything.

I tried going to the settings to do a fresh install of the homebrew channel but it gave me a pop up in English saying that it couldn’t connect to an address and to try making sure my internet connection is active. I have worked on a ton of Japanese Wiis in the past and never once gotten this error before. I saw another thread on here from about a decade away suggesting it was a botched attempted at region changing the Wii and to fix it with any region changer. Great fix but like I said, the genius before me didn’t leave the homebrew channel on it so I’m kinda left high and dry. I should also mention all the other text on the console is in Japanese besides the labels for the wad channel the previous person installed

Is there anything I can do to fix this or do I just have to tell him that it’s a lost cause?
Here's what you wanna do. If you cannot seem to do str2hax, then there's also Letterbomb. Reinstall BootMii as boot2 and install HBC. Install Priiloader for additional brick protection too, that way you don't risk bricking your console for doing risky things such as installing corrupt WADs, region changing or installing themes. Also make sure you connect to the internet and download the latest System Menu. There's even more but I'm not gonna convolute you too much, do be sure to check out https://wii.guide
 

Orca3306

New Member
OP
Newbie
Joined
Sep 6, 2023
Messages
4
Trophies
0
Age
21
XP
18
Country
United States
Here's what you wanna do. If you cannot seem to do str2hax, then there's also Letterbomb. Reinstall BootMii as boot2 and install HBC. Install Priiloader for additional brick protection too, that way you don't risk bricking your console for doing risky things such as installing corrupt WADs, region changing or installing themes. Also make sure you connect to the internet and download the latest System Menu. There's even more but I'm not gonna convolute you too much, do be sure to check out
I’m well familiar with the guide, I’ve modded well over a hundred Wiis by now. The issue, like I stated initially, is that I can’t access the settings. It’s impossible for me to do the letterbomb method since I need the MAC address to do that. Without access to the settings that’s a little hard to get off the console

(had to remove the link from your post in my quote cause I’m a new user)
 

KleinesSinchen

GBAtemp's Backup Reminder + Fearless Testing Sina
Member
GBAtemp Patron
Joined
Mar 28, 2018
Messages
4,455
Trophies
2
XP
14,943
Country
Germany
Maybe stupid, but worth a try:

Can't do much more than ask a few questions:
How about alternate exploits?
Do legit game discs work? Could you do Smash Stack?

How about Bluebomb? That one should be worth a shot.


because the homebrew channel launches directly into a version of Wii64 that crashes the console if you do anything
??? What ???
Is that some kind of forwarder instead of the HB Channel? Any Wii64 directory containing a boot.dol you could replace with another file?
 

Orca3306

New Member
OP
Newbie
Joined
Sep 6, 2023
Messages
4
Trophies
0
Age
21
XP
18
Country
United States
Maybe stupid, but worth a try:
  • Extract BootMii files if not already done to SD. BootMii in boot2 would be nice…
  • Try bringing up Priiloder (or the older Preloader) by holding (Reset) on power on.

Can't do much more than ask a few questions:
How about alternate exploits?
Do legit game discs work? Could you do Smash Stack?

How about Bluebomb? That one should be worth a shot.



??? What ???
Is that some kind of forwarder instead of the HB Channel? Any Wii64 directory containing a boot.dol you could replace with another file?
image.jpg
image.jpg
image.jpg

I’m as lost as you on that one buddy. I honestly have zero clue how in the world someone messes up a console this badly. I’ve seen some messed up consoles, but this is a new level.

Unfortunately the soft brain before me didn’t install priiloader or even do a backup with bootmii so unfortunately restoring it is a no go for now.

I don’t have that game you mentioned but I just grabbed a Japanese Wii sports resort and it loaded up straight away.

I’ll have to check out alternative exploits. I’ve always just used Letterbomb and str2hax since they’re just what I learned and always have worked. I’ll definitely look into Bluebomb to see if it’s a possibility
 

Ryccardo

Penguin accelerator
Member
Joined
Feb 13, 2015
Messages
7,696
Trophies
1
Age
28
Location
Imola
XP
6,922
Country
Italy
I tried going to the settings to do a fresh install of the homebrew channel but it gave me a pop up in English saying that it couldn’t connect to an address and to try making sure my internet connection is active.
Semibrick, ignore what it says, just keep in mind to complete the region changing job asap when you'll be able to (and don't factory reset anything before that)

All those custom channels in the picture, are any of them forwarders? In which case it may be rather easy to run the hackmii installer by replacing the right file on the SD (whether it'll work afterwards is a separate question)
 

morning_glory

Well-Known Member
Member
Joined
Aug 29, 2022
Messages
451
Trophies
0
Age
64
Location
Mildura
XP
833
Country
Australia
I'm by far not an expert.
Have you given AnyTittleDeleter, ShowMiiWads or ShowMiiNand a try ?
Perhaps these apps can start to help you correct those issues (?).
 

XFlak

Wiitired but still kicking
Member
Joined
Sep 12, 2009
Messages
13,841
Trophies
3
Age
38
Location
Cyprus, originally from Toronto
Website
modmii.github.io
XP
9,840
Country
Cyprus
It looks like u have a lot of forwarder channels installed, like the fceugx one will probably load whatever u save to usb or sd:/apps/fceugx/boot.dol (or boot.elf), or the gx one should load whatever is installer to apps/usbloader_gx/boot.dol or boot.elf

It's possible the last guy hardcoded the apps into the channels and they're no longer forwarders. Easiest way to check that would be make sure the sd and usb are disconnected and launch the channels, if they return you to the system menu the they are almost certainly a forwarder of some sort, and then it's just a matter of saving the apps u need to the location the forwarder is pointing to and launching them that way
 
Last edited by XFlak,
  • Like
Reactions: scooby74029

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • Sicklyboy @ Sicklyboy:
    I love how insurance companies can deny procedures because they deem it not medically necessary despite the procedure being ordered by a doctor
  • K3Nv2 @ K3Nv2:
    Going with that right now with a dental claim morons put the wrong company name and rejected claims been on hold an hour for the claims department
  • K3Nv2 @ K3Nv2:
    @Sicklyboy, BTW is it better to go usb or bt for these mini Pcs figure you may know since you play with rack systems so much
  • Sicklyboy @ Sicklyboy:
    Counting my blessings that my insurance hasn't caused me really any headache (yet, at least) despite the fact that I've been getting way more appointments and what not recently due
  • Sicklyboy @ Sicklyboy:
    @K3Nv2, what do you mean, what are you trying to do?
  • K3Nv2 @ K3Nv2:
    Just looking at a built in mouse pad keyboard combo
  • K3Nv2 @ K3Nv2:
    I loose the dongle constantly but they may have better connection with usb frequency
  • Sicklyboy @ Sicklyboy:
    Imo Bluetooth is always a option of last resort for me
  • Sicklyboy @ Sicklyboy:
    Except for phones because it tends to be pretty reliable there
  • K3Nv2 @ K3Nv2:
    I got a bad habit of taking out usb transmitter and loosing it because they can't you know print names on the damn things
  • Sicklyboy @ Sicklyboy:
    But any desktop OS, I've never had anything but frustration trying to get Bluetooth devices to work reliably and stable. It might pair and connect once, and then next time I go to use it I have to delete and re-pair it again
  • K3Nv2 @ K3Nv2:
    5.3 has been so good I think 6 is really going to make it stable
  • K3Nv2 @ K3Nv2:
    I remember how shit 3 was
  • Sicklyboy @ Sicklyboy:
    Ptouch labeler aren't terribly expensive, label shit yourself fam. This is the one I own and there are cheaper ones too https://www.amazon.com/Brother-P-Touch-PTH110BP-Portable-included/dp/B09QXYND6S
  • Sicklyboy @ Sicklyboy:
    Solves part of the problem, mixing up which dongle is which. Then you just have to not lose them lol
  • K3Nv2 @ K3Nv2:
    Double D would be proud
    +1
  • Sicklyboy @ Sicklyboy:
    Even my Xbox One controller I have it paired to my desktop over Bluetooth, it USUALLY works but sometimes it refuses to connect and I have to delete and re-pair it. Maddening
  • K3Nv2 @ K3Nv2:
    Gigabytes built in mobo bt/wifi pairs pretty decent
  • Sicklyboy @ Sicklyboy:
    That's what I'm using :(
  • K3Nv2 @ K3Nv2:
    Ran a driver update in device manager?
  • Sicklyboy @ Sicklyboy:
    Not recently but I think it's less a driver issue and more just Windows having a garbage Bluetooth stack
  • K3Nv2 @ K3Nv2:
    Could be I was having issues when I first upgraded it and didn't realiser gigabyte has specific driver revisions which is stupid
  • K3Nv2 @ K3Nv2:
    Which is married to the boards revision
  • Xdqwerty @ Xdqwerty:
    Made my first review
  • RedColoredStars @ RedColoredStars:
    I've gone years without ever removing a logitech usb transmitter. Across several replacements of keyboards and mice. It just stays put.
    RedColoredStars @ RedColoredStars: I've gone years without ever removing a logitech usb transmitter. Across several replacements of...