Hacking Removing B9S

[MeatRedHD]

care to elaborate on what exactly happened?

I changed firm0.bin and my 3ds does not turn on anymore.

 

[lone_wolf323]

I changed firm0.bin and my 3ds does not turn on anymore.

If you updated to b9s 1.2. There should be a boot.firm within the luma3ds.7z file that you need to use for your system

 

[MeatRedHD]

If you updated to b9s 1.2. There should be a boot.firm within the luma3ds.7z file that you need to use for your system

Yes

 

[MeatRedHD]

but my 3ds does not turn on

 

[Deleted member 414991]

but my 3ds does not turn on

How did you modify firm0?

 

[MeatRedHD]

There is a solution. However, before you (and anyone else reading this) actually chooses to do this, please consider that:
- Nintendo likely already flagged your system for a ban, and you're best off getting a new system if you have already done unauthorized activity and shared it online somehow
- Hacked consoles sell significantly higher than unhacked consoles.

That said, here is one way you can uninstall b9s:
0) Make sure you have a functional NAND backup before you start, in case anything goes wrong.
1) Download the .firm for your matching firmware+model on 3ds.guide's hardmod page: https://3ds.guide/installing-boot9strap-(hardmod)
**If you download and flash the wrong one, you will hardbrick.
2) Rename the .firm to firm0.bin and copy it to your SD card
3) Boot up GodMode9 and copy/paste the firm0.bin from your SD to the SysNand Virtual (S:/ ) drive. Heed all of the warnings.
**The system will warn you several times and also tell you that your super small ~300kbish file is nowhere near the entire 4mb you're replacing. This is fine: Do it anyway (as long as you're 100% sure it's the right file)
4) Reboot and perform a system update to clean your firm1.

1) Download the .firm for your matching firmware+model on 3ds.guide's hardmod page: https://3ds.guide/installing-boot9strap-(hardmod)
**If you download and flash the wrong one, you will hardbrick.
2) Rename the .firm to firm0.bin and copy it to your SD card
3) Boot up GodMode9 and copy/paste the firm0.bin from your SD to the SysNand Virtual (S:/ ) drive. Heed all of the warnings.

 

[lone_wolf323]

1) Download the .firm for your matching firmware+model on 3ds.guide's hardmod page: https://3ds.guide/installing-boot9strap-(hardmod)
**If you download and flash the wrong one, you will hardbrick.
2) Rename the .firm to firm0.bin and copy it to your SD card
3) Boot up GodMode9 and copy/paste the firm0.bin from your SD to the SysNand Virtual (S:/ ) drive. Heed all of the warnings.

So you are doing a full Hardmod of your system?

 

[MeatRedHD]

So you are doing a full Hardmod of your system?

no

 

[lone_wolf323]

no

The link you provided there is for when you are doing a hardmod of the system.

 

[Quantumcat]

no

Why were you following a hardmod guide?

 

[MeatRedHD]

The link you provided there is for when you are doing a hardmod of the system.

It does not uninstall b9s?

 

[Deleted member 414991]

It does not uninstall b9s?

No.

 

[DocKlokMan]

It does not uninstall b9s?

It can but it's very dangerous. There's a much simpler and safer way to uninstall CFW in the guide: https://3ds.guide/uninstall-cfw

 

[MeatRedHD]

It can but it's very dangerous. There's a much simpler and safer way to uninstall CFW in the guide: https://3ds.guide/uninstall-cfw

No.

There is no way of unbrick ?

 

[Deleted member 414991]

There is no way of unbrick ?

Yeah, there is, with a hardmod or ntrboothax.

 

[lone_wolf323]

does anything happen when you try to boot your system?

 

[Majickhat55]

Well whoever linked that tutorial in the first place should have reconsidered. If you don't already have a hardmod (Or NtRBootHaX nowadays) messing around with FIRM 0/1 in GM9 is a one way ticket to a BSOD. Not that anyone told you to follow it, you just kind of did thinking it would work so not really your fault. I'm sure you can visit a few of these posts with people offering NTRBootHaX services free. You would just have to buy a Flashcard and provide shipping, or wait and buy a pre-flashed card from someone and do it yourself.

There is no way of unbrick ?

 

[MeatRedHD]

Well whoever linked that tutorial in the first place should have reconsidered. If you don't already have a hardmod (Or NtRBootHaX nowadays) messing around with FIRM 0/1 in GM9 is a one way ticket to a BSOD. Not that anyone told you to follow it, you just kind of did thinking it would work so not really your fault. I'm sure you can visit a few of these posts with people offering NTRBootHaX services free. You would just have to buy a Flashcard and provide shipping, or wait and buy a pre-flashed card from someone and do it yourself.

THANKS !!!!!! I have powersave and Acekard 2i !

 

[Deleted member 414991]

THANKS !!!!!! I have powersave and Acekard 2i !

The powersaves method isn't out quite yet. You'll have to wait a little bit.

 

[MeatRedHD]

The powersaves method isn't out quite yet. You'll have to wait a little bit.

Yes I know, I translate to French for 3ds.guide