care to elaborate on what exactly happened?
I changed firm0.bin and my 3ds does not turn on anymore.
care to elaborate on what exactly happened?
If you updated to b9s 1.2. There should be a boot.firm within the luma3ds.7z file that you need to use for your systemI changed firm0.bin and my 3ds does not turn on anymore.
If you updated to b9s 1.2. There should be a boot.firm within the luma3ds.7z file that you need to use for your system
There is a solution. However, before you (and anyone else reading this) actually chooses to do this, please consider that:
- Nintendo likely already flagged your system for a ban, and you're best off getting a new system if you have already done unauthorized activity and shared it online somehow
- Hacked consoles sell significantly higher than unhacked consoles.
That said, here is one way you can uninstall b9s:
0) Make sure you have a functional NAND backup before you start, in case anything goes wrong.
1) Download the .firm for your matching firmware+model on 3ds.guide's hardmod page: https://3ds.guide/installing-boot9strap-(hardmod)
**If you download and flash the wrong one, you will hardbrick.
2) Rename the .firm to firm0.bin and copy it to your SD card
3) Boot up GodMode9 and copy/paste the firm0.bin from your SD to the SysNand Virtual (S:/ ) drive. Heed all of the warnings.
**The system will warn you several times and also tell you that your super small ~300kbish file is nowhere near the entire 4mb you're replacing. This is fine: Do it anyway (as long as you're 100% sure it's the right file)
4) Reboot and perform a system update to clean your firm1.
So you are doing a full Hardmod of your system?1) Download the .firm for your matching firmware+model on 3ds.guide's hardmod page: https://3ds.guide/installing-boot9strap-(hardmod)
**If you download and flash the wrong one, you will hardbrick.
2) Rename the .firm to firm0.bin and copy it to your SD card
3) Boot up GodMode9 and copy/paste the firm0.bin from your SD to the SysNand Virtual (S:/ ) drive. Heed all of the warnings.
The link you provided there is for when you are doing a hardmod of the system.
The link you provided there is for when you are doing a hardmod of the system.
It can but it's very dangerous. There's a much simpler and safer way to uninstall CFW in the guide: https://3ds.guide/uninstall-cfwIt does not uninstall b9s?
It can but it's very dangerous. There's a much simpler and safer way to uninstall CFW in the guide: https://3ds.guide/uninstall-cfw
Yeah, there is, with a hardmod or ntrboothax.There is no way of unbrick ?
There is no way of unbrick ?
Well whoever linked that tutorial in the first place should have reconsidered. If you don't already have a hardmod (Or NtRBootHaX nowadays) messing around with FIRM 0/1 in GM9 is a one way ticket to a BSOD. Not that anyone told you to follow it, you just kind of did thinking it would work so not really your fault. I'm sure you can visit a few of these posts with people offering NTRBootHaX services free. You would just have to buy a Flashcard and provide shipping, or wait and buy a pre-flashed card from someone and do it yourself.
The powersaves method isn't out quite yet. You'll have to wait a little bit.THANKS !!!!!! I have powersave and Acekard 2i !
The powersaves method isn't out quite yet. You'll have to wait a little bit.