Remaping gamecube controller on usb loader

[Caleor12]

Hello, I wanted to know if there´s a way to remap the buttons of the gamecube controller on usb loader. To be precise, i want to change the Y button and UP dpad button because i find it a little annoying to use the dpad to do tricks in mkwii. I have currently installed Nintendont and Usb loader gx in the Wii. The wii is the original version with an original gc controller.

 

[The Real Jdbye]

Hello, I wanted to know if there´s a way to remap the buttons of the gamecube controller on usb loader. To be precise, i want to change the Y button and UP dpad button because i find it a little annoying to use the dpad to do tricks in mkwii. I have currently installed Nintendont and Usb loader gx in the Wii. The wii is the original version with an original gc controller.

You probably can't do it with USB Loader GX, USB loaders have no access to change that since controller input is handled by the IOS, and Fakemote doesn't support GC controllers.
In some cases there might be cheat codes available to remap certain buttons but they are highly game specific.
But there is one thing that might help: RVLoader.
It's designed for portable Wiis, but it has the ability to emulate Wiimote controls using a GameCube controller, and allows you to remap the controls. It would replace USB Loader GX (at least for that one game) since it has its own USB loading functionality.

Edit: You are in luck, there is just such a code for Mario Kart Wii.
For RMCE01 (USA), paste in txtcodes\RMCE01.txt on the same storage as your games (everything up to and including the 60000000 00000000 line), edit the XXXX and YYYY values to your liking and then go to the game settings in USB Loader GX to enable the cheat:

RMCE01
Mario Kart Wii

Key remapper for GC controller [mdmwii]
C21afb58 00000005
39C0XXXX 7DCF0038
7C0F7000 40A20010
7C0F0050 39E0YYYY
7C007A14 B0040000
60000000 00000000
XXXX = key you want to change
YYYY = key assigned
Values:
0081 = D-Pad Left
0082 = D-Pad Right
0084 = D-Pad Down
0088 = D-Pad Up
0090 = Z
00A0 = R
00C0 = L
0180 = A
0280 = B
0480 = X
0880 = Y
1080 = Start

For RMCP01 (EUR), paste in txtcodes\RMCP01.txt on the same storage as your games (everything up to and including the 60000000 00000000 line), edit the XXXX and YYYY values to your liking and then go to the game settings in USB Loader GX to enable the cheat:

RMCP01
Mario Kart Wii

Key remapper for GC controller [mdmwii]
C21afbf8 00000005
39C0XXXX 7DCF0038
7C0F7000 40A20010
7C0F0050 39E0YYYY
7C007A14 B0040000
60000000 00000000
XXXX = key you want to change
YYYY = key assigned
Values:
0081 = D-Pad Left
0082 = D-Pad Right
0084 = D-Pad Down
0088 = D-Pad Up
0090 = Z
00A0 = R
00C0 = L
0180 = A
0280 = B
0480 = X
0880 = Y
1080 = Start

In your case, you should change 39C0XXXX -> 39C00088 and 39E0YYYY -> 39E00880.

 

[Caleor12]

Thank you so much!! It worked perfectly!!!!!

 

[Liquid_Snake]

You probably can't do it with USB Loader GX, USB loaders have no access to change that since controller input is handled by the IOS, and Fakemote doesn't support GC controllers.
In some cases there might be cheat codes available to remap certain buttons but they are highly game specific.
But there is one thing that might help: RVLoader.
It's designed for portable Wiis, but it has the ability to emulate Wiimote controls using a GameCube controller, and allows you to remap the controls. It would replace USB Loader GX (at least for that one game) since it has its own USB loading functionality.

Edit: You are in luck, there is just such a code for Mario Kart Wii.
For RMCE01 (USA), paste in txtcodes\RMCE01.txt on the same storage as your games (everything up to and including the 60000000 00000000 line), edit the XXXX and YYYY values to your liking and then go to the game settings in USB Loader GX to enable the cheat:

RMCE01
Mario Kart Wii

Key remapper for GC controller [mdmwii]
C21afb58 00000005
39C0XXXX 7DCF0038
7C0F7000 40A20010
7C0F0050 39E0YYYY
7C007A14 B0040000
60000000 00000000
XXXX = key you want to change
YYYY = key assigned
Values:
0081 = D-Pad Left
0082 = D-Pad Right
0084 = D-Pad Down
0088 = D-Pad Up
0090 = Z
00A0 = R
00C0 = L
0180 = A
0280 = B
0480 = X
0880 = Y
1080 = Start

For RMCP01 (EUR), paste in txtcodes\RMCP01.txt on the same storage as your games (everything up to and including the 60000000 00000000 line), edit the XXXX and YYYY values to your liking and then go to the game settings in USB Loader GX to enable the cheat:

RMCP01
Mario Kart Wii

Key remapper for GC controller [mdmwii]
C21afbf8 00000005
39C0XXXX 7DCF0038
7C0F7000 40A20010
7C0F0050 39E0YYYY
7C007A14 B0040000
60000000 00000000
XXXX = key you want to change
YYYY = key assigned
Values:
0081 = D-Pad Left
0082 = D-Pad Right
0084 = D-Pad Down
0088 = D-Pad Up
0090 = Z
00A0 = R
00C0 = L
0180 = A
0280 = B
0480 = X
0880 = Y
1080 = Start

In your case, you should change 39C0XXXX -> 39C00088 and 39E0YYYY -> 39E00880.

Hi, I recently bought a modified Nintendo Wii to play Metal Gear Solid: The Twin Snakes gamecube PAL version.

I also bought an 8bitdo adapter to use the Sony PS4 wireless controller, but I'd like to know how to remap the buttons because the Nintendo controller's buttons are awkward.

I read that you can do this with Ocarina codes. Can you tell me how?

 

[The Real Jdbye]

Hi, I recently bought a modified Nintendo Wii to play Metal Gear Solid: The Twin Snakes gamecube PAL version.

I also bought an 8bitdo adapter to use the Sony PS4 wireless controller, but I'd like to know how to remap the buttons because the Nintendo controller's buttons are awkward.

I read that you can do this with Ocarina codes. Can you tell me how?

I can't find any gecko codes for that game to remap the controls.

Nintendont only supports button remapping over USB. If you connect it wired over USB then you can make a custom controller.ini to customize the mappings.

 

[Liquid_Snake]

Non riesco a trovare alcun codice Gecko per quel gioco per rimappare i comandi.

Nintendont supporta la rimappatura dei pulsanti solo tramite USB. Se lo colleghi tramite cavo USB, puoi creare un file controller.ini personalizzato per modificare le mappature.

But is it possible to create Gecko code?

 

[The Real Jdbye]

But is it possible to create Gecko code?

Not many people making those these days. Back in the day you might have found someone willing to make it for you. Now, I'm not sure.