RedNAND!!!

Discussion in '3DS - Flashcards & Custom Firmwares' started by Haider Raza, Jun 26, 2016.

  1. Haider Raza
    OP

    Haider Raza Alhumdulillah

    Member
    GBAtemp Patron
    Haider Raza is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    1,349
    252
    Jan 30, 2016
    Pakistan
    Im on luma part 3 redNAND thing. Im stuck help please

    1. Open TinyFormat
    2. Press Y to format your SysNAND (Don't worry, everything is still saved on RedNAND)
    3. Go through initial setup without linking your Nintendo Network ID, you want it to remain linked only to RedNAND to prevent issues
    4. Reinstall menuhax on SysNAND as the format will have removed it
    5. Boot RedNAND
    6. Open System Settings
    7. If you do not see "Emu" in front of the version number, then you are not on RedNAND. DO NOT UPDATE, FIND WHAT WENT WRONG
    8. Update your RedNAND to the latest version using system settings (Once you exit System Settings / SD Card Management you will be returned to SysNAND, make sure to enter back into RedNAND before updating!)
    9. As your 3DS is setup right now, you must launch Luma3DS from the Homebrew Launcher every time you want to boot RedNAND; by the end of the guide you will boot into CFW SysNAND by default instead of having to use RedNAND
    After formating the sysnand it said reinstall menuhax how do I do that?
     
  2. solress

    solress Not a dev

    Member
    579
    306
    May 12, 2016
    Netherlands
    Between here and there
    go through browserhax and install it again like before
     
  3. Kyojin

    Kyojin #include "brain.h"

    Member
    467
    232
    Sep 7, 2015
    France
    TerryG likes this.
  4. Haider Raza
    OP

    Haider Raza Alhumdulillah

    Member
    GBAtemp Patron
    Haider Raza is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    1,349
    252
    Jan 30, 2016
    Pakistan
    tried but gives error & sends back to main menu!

    — Posts automatically merged - Please don't double post! —

    Do you want to help or what?
     
  5. Kyojin

    Kyojin #include "brain.h"

    Member
    467
    232
    Sep 7, 2015
    France
    Keep in mind that you are not entitled to anyone's help here. :wink:
     
  6. Haider Raza
    OP

    Haider Raza Alhumdulillah

    Member
    GBAtemp Patron
    Haider Raza is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    1,349
    252
    Jan 30, 2016
    Pakistan
    Why is this your site? Did you add rules here? Getting someone help is not bad thing!
     
  7. Davidosky99

    Davidosky99 Eevee :3

    Banned
    2,582
    1,570
    Jun 7, 2015
    Porto
    I was gonna help you but thanks to your cuck responses to people that were gonna help you or are helpful in general like @Kyojin maybe I'll abstain from helping you
     
  8. Kyojin

    Kyojin #include "brain.h"

    Member
    467
    232
    Sep 7, 2015
    France
    I know it's not a bad thing, I even replied to the noob paradise thread. What is wrong though is posting the same message three times on three different threads. There is absolutely no need to do that, it's just basic rules in a forum. ;)

    EDIT: if you want help, let's stop this right here and go back to that noob paradise thread to get your menuhax reinstalled. There is really no point in fighting about this.
     
    Last edited by Kyojin, Jun 26, 2016
  9. solress

    solress Not a dev

    Member
    579
    306
    May 12, 2016
    Netherlands
    Between here and there
    Go to the home menu, install a theme, go to browserhax and it should be fixed
     
  10. Haider Raza
    OP

    Haider Raza Alhumdulillah

    Member
    GBAtemp Patron
    Haider Raza is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    1,349
    252
    Jan 30, 2016
    Pakistan
    After updating & completing my part 3 of luma tutorial do I really need to do the part 4&5? Do I have to downgrade my console to 2.1.0?

    — Posts automatically merged - Please don't double post! —

    part 4 says downgrade to 2.1.0.
     
  11. Kyojin

    Kyojin #include "brain.h"

    Member
    467
    232
    Sep 7, 2015
    France
    It depends on what you are planning to do. If you want to set up arm9loaderhax (console boots in ~7 seconds like an un-hacked console, has brick protection, and a permanent hack), yes you have to.

    If you don't want that and only want to keep using menuhax (longer boot times, and if someone updates your 9.2 SysNAND, you are screwed) you can continue to Part 4, Section III, step 7 (included) and stop there.

    If you just wanted to have access to CFW (Luma3DS in this case), you'll be done by then. But IMHO (and a lot of Tempers will agree) arm9loaderhax is worth the thrill of downgrading to 2.1 and then going back to 11.0 as it is more future-proof.
     
  12. Haider Raza
    OP

    Haider Raza Alhumdulillah

    Member
    GBAtemp Patron
    Haider Raza is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    1,349
    252
    Jan 30, 2016
    Pakistan
    So I have to start from section three of part 4? If its good to use then i'll try installing it :)
     
  13. Kyojin

    Kyojin #include "brain.h"

    Member
    467
    232
    Sep 7, 2015
    France
    You just want a menuhax setup and not arm9loaderhax?
     
  14. Haider Raza
    OP

    Haider Raza Alhumdulillah

    Member
    GBAtemp Patron
    Haider Raza is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    1,349
    252
    Jan 30, 2016
    Pakistan
    Don't know much about it. I'm new here. If you think its good to use then I'll follow the part4.

    — Posts automatically merged - Please don't double post! —

    I have updated my red nand to 11.0 so will the part 4 still work?
     
    Last edited by Haider Raza, Jun 26, 2016
  15. Kyojin

    Kyojin #include "brain.h"

    Member
    467
    232
    Sep 7, 2015
    France
    I would honestly advise you to go to the end and have arm9loaderhax set up, having a menuhax setup may be confusing for beginners. So you should follow parts 4 and 5 to the letter (including making all the backups and safely storing them). Double read every step to make sure you understand what it says, do NOT panic and read the troubleshooting page if something is odd, and everything should be fine.

    Yes, your RedNAND should be on 11.0, and make sure downloaded Luma3DS v5.5 and not an older version. If you feel like some steps are unclear, ask here or drop me a PM. ^_^

    EDIT: also, if you are using Chrome or Firefox, you can use this extension to help you check the steps.
     
    Last edited by Kyojin, Jun 26, 2016
    Haider Raza likes this.
  16. GalladeGuy

    GalladeGuy Freeze Kirby :3

    Member
    2,587
    2,652
    Oct 28, 2015
    United States
    Protip: Don't piss off the people trying to help you. :P
     
  17. Haider Raza
    OP

    Haider Raza Alhumdulillah

    Member
    GBAtemp Patron
    Haider Raza is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    1,349
    252
    Jan 30, 2016
    Pakistan
    ok ;)
     
  18. Haider Raza
    OP

    Haider Raza Alhumdulillah

    Member
    GBAtemp Patron
    Haider Raza is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    1,349
    252
    Jan 30, 2016
    Pakistan
    I'm stuck on part 6 gives black screen on boot.

    Section VI - Finalizing setup
    1. Reinsert your SD card into your 3DS
    2. Still from EmuNAND9, go to EmuNAND Manager Options and make a backup of SysNAND tosysNAND.bin
    3. Press Select on the main menu to eject your SD card, then put it in your computer
    4. Rename sysNAND.bin to sysNAND-A9LHAX.bin, sysNAND.bin.sha sysNAND-A9LHAX.bin.sha, and copy both to a safe location on your computer; this is a SysNAND backup containing arm9loaderhax (Your backup should match one of the sizes on this page; if it does not, you should delete it and make a new one!)
    5. Delete sysNAND-A9LHAX.bin and sysNAND-A9LHAX.bin.sha from your SD card
    6. Reinsert your SD card into your 3DS then press Start to reboot
    7. Update your CFW SysNAND to the latest version using system settings (if it is not already)
    8. Open Health and Safety (which is now FBI)
    9. Select "SD"
    10. Navigate to hblauncher_loader.cia and press A to install
    11. Navigate to lumaupdate.cia and press A to install
    12. Exit with the home button
    13. Launch the Homebrew Launcher from the home menu icon at least once to ensure the payload is functional
    14. Reboot!
     
  19. Haider Raza
    OP

    Haider Raza Alhumdulillah

    Member
    GBAtemp Patron
    Haider Raza is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    1,349
    252
    Jan 30, 2016
    Pakistan
    I'm stuck on part 6 gives black screen on boot.

    Section VI - Finalizing setup
    1. Reinsert your SD card into your 3DS
    2. Still from EmuNAND9, go to EmuNAND Manager Options and make a backup of SysNAND tosysNAND.bin
    3. Press Select on the main menu to eject your SD card, then put it in your computer
    4. Rename sysNAND.bin to sysNAND-A9LHAX.bin, sysNAND.bin.sha sysNAND-A9LHAX.bin.sha, and copy both to a safe location on your computer; this is a SysNAND backup containing arm9loaderhax (Your backup should match one of the sizes on this page; if it does not, you should delete it and make a new one!)
    5. Delete sysNAND-A9LHAX.bin and sysNAND-A9LHAX.bin.sha from your SD card
    6. Reinsert your SD card into your 3DS then press Start to reboot
    7. Update your CFW SysNAND to the latest version using system settings (if it is not already)
    8. Open Health and Safety (which is now FBI)
    9. Select "SD"
    10. Navigate to hblauncher_loader.cia and press A to install
    11. Navigate to lumaupdate.cia and press A to install
    12. Exit with the home button
    13. Launch the Homebrew Launcher from the home menu icon at least once to ensure the payload is functional
    14. Reboot!
     
  20. Davidosky99

    Davidosky99 Eevee :3

    Banned
    2,582
    1,570
    Jun 7, 2015
    Porto