PS5 Exploit Guide

Blythe93 · Nov 15, 2025

SpaceMunkey said:
Question: if i install the Y2JB on my 7.61 bd jailbroken ps5 and update my system to 9.60, will my applications and Y2JB be still there after the update or would i need to install the Y2JB backup to regain jailbreak...

I believe that your Y2JB will still be there. Firmware update shouldn't affect saves as far as I know, but don't quote me on that. Also, I wouldn't personally update to 9.60 unless there's no real benefit of doing so other than just being on a higher firmware and playing a couple of games when unciphered PKGs (PS5's equivalent to the PS4's FPKGs, simply put) might be around the corner. It's generally advised to stay on as low as possible firmware unless something major comes out on a higher firmware, like CFW or better exploit stability.

zebrone · Nov 15, 2025

BobaFett_UK said:
Just installed Y2JB 1.2.1 using the itsPLK autoloader.... works flawlessly.....with the internet switched on

However, with the internet turned off, it crashed!!! Interesting ! In fact it's crashed 2 times in a row.... Had to physcially pull the plug out the socket.... Anyone else experienced this behaviour?

https://github.com/itsPLK/ps5_y2jb_autoloader

Can you write the parameters of your connection, dns1,dns...etc,please?

BobaFett_UK · Nov 15, 2025

zebrone said:
Can you write the parameters of your connection, dns1,dns...etc,please?

I am not using the DNS 127.0.0.2 but using the DNS of my pi-hole which blocks everything associated with youtube and Sony.. Secondary DNS is blank...

This morning though, Y2JB has worked fine but it seems i need to have the internet connected.. I will run a few more itterations and report back...

The only thing i have not done is this final step of blocking YT updates using the appinfo-editor.py.

Post automatically merged: Nov 15, 2025

Example of a crash which just happened now

Post automatically merged: Nov 15, 2025

Restarted and this happened

Fcaust22 · Nov 15, 2025

Where can I find the Netflix 5.00 pkg for ps5? It's not on prospero patches... Afaik that's the one needed for the Netflix n hack exploit, right?

zebrone · Nov 15, 2025

BobaFett_UK said:
I am not using the DNS 127.0.0.2 but using the DNS of my pi-hole which blocks everything associated with youtube and Sony.. Secondary DNS is blank...

This morning though, Y2JB has worked fine but it seems i need to have the internet connected.. I will run a few more itterations and report back...

The only thing i have not done is this final step of blocking YT updates using the appinfo-editor.py.

Post automatically merged: Nov 15, 2025

Example of a crash which just happened now

View attachment 539494

Post automatically merged: Nov 15, 2025

Restarted and this happened

Im using yt 127....block...
but the connection from PS5 - to PC with FTP is slow and often lacks....so sending o receiving a file is a pain in the ass...

BobaFett_UK · Nov 15, 2025

zebrone said:
Im using yt 127....block...
but the connection from PS5 - to PC with FTP is slow and often lacks....so sending o receiving a file is a pain in the ass...

What i am finding is that the jb is not consistent... it's definetly flakey but that's the nature of all jb's. Also i'm not sure whch fw Gezine developed this on and maybe that's a core influencing factor... what i am noticing is that if one does have an issue you should use the option to turn off the console and wait a few seconds before restarting it. Then the Y2JB seems to work again...

Also more interestingly, Modded's YT app is the US version of the app and not the EU version so 1650 and not 1651. Don't know if this may be an issue if one's console is EU region. Easy to test though...

EDIT: Coming out of rest mode causes a console freeze! Well for me it does!

madbrainx · Nov 15, 2025

HS2005 · Nov 15, 2025

zebrone said:
Tried YTJB and run almost well.

Thinking of updating console from fw 7.61 to fw 9.xx range. Whats the best 9.xx range firmware:

9.00
9.20
9.40
9.60?
What do you recommend to me?
Better stay on 9.xx?

The Y2JB method also works very well on my side.
I'm on 9.60 and due to the fairly new Netflix-N-Hack I could JB my PS5 and keep all of my data and saves.
I did not use a back-up. Just the 4TB image that was provided in the releases: https://github.com/earthonion/Netflix-N-Hack/releases/

In short:

No Back-up used
No Lua / webkit
Used Netflix-N-Hack (4TB image) > then Y2JB. Final: ps5_y2jb_autoloader

Steps taken:

1. Moved all my games from the additional Samsung M2 SSD to the internal harddrive.
2. External M2 (4TB Samsung) > connected via USB > Laptop
3. Used the 4TB image from the Netflix-N-Hack github and "burned" it onto the Samsung M2 SSD. This will wipe the M2 (in my case it did not matter because it was empty anyway)
4. I placed the Samsung M2 SSD into the PS5. > Copied the Netflix app to the internal drive (it was on the M2 drive).
5. Loaded the "Netflix" Jailbreak.
6. Once the Jailbreak was loaded I installed the Y2JB version as well via a PKG file. Because now you can when you have a JB device.

7. I ran the Y2JB, instead of the Netflix JB to test.
8. I download and configurated the Y2JB Autoloader. I used a USB for this to load the files. The script I used and adjust for my personal settings:

Code:

#
# ps5_autoloader
# autoload config file
# -------------------------
# The loader looks for ps5_autoloader/autoload.txt in this order (highest priority first):
# 1) USB drives
# 2) /data directory
# 3) savedata directory
# Only the first autoload.txt found will be used.
#
# Usage:
# - Put one filename per line (e.g., payload.elf or script.js).
# - Supported payload types: .elf, .bin; .lua and .js are supported depending on the exploit.
# - Lines starting with '!' are sleep commands (example: !1000 sleeps for 1000 ms).
#
# Note: The kernel exploit and elf_loader start automatically — do NOT include them here.
#

etaHEN.elf
!1000 kstuff.elf
!1000 ftpsrv-ps5.elf

9. Done. I do not have to use a USB or external device to load the Jailbreak. I just click on the the YouTube app and every .elf file is loaded.

j4yd1 · Nov 15, 2025

FOMO ...

Arcade Spirits - The New Challengers [PS4 + PS5].jpg

Antho27mellilium · Nov 15, 2025

This is the same for the ps4 or is different?

Adam512 · Nov 15, 2025

zebrone said:
Tried YTJB and run almost well.

Thinking of updating console from fw 7.61 to fw 9.xx range. Whats the best 9.xx range firmware:

9.00
9.20
9.40
9.60?
What do you recommend to me?
Better stay on 9.xx?

Most people update to 9.60, but it probably doesn't bring anything extra compared to 9.00... I recommend staying as low as possible, but if you insist on updating then go for 9.00 and then at the end of the year you'll see what PS5 stuff the developers have prepared for us.. you'll decide accordingly. BTW: there's some flow vulnerability on the wiki that's only possible up to 9.40(maybe), so it could theoretically happen that it's already fixed in 9.60.

solitaire4eva said:
To my understanding the PS4 version functions similar to the PS4 version and the PS5 version has more access to the PS5 calls. But I figure if you need to use the PS5 version you have to have either a Jailbroken PS5 already to FTP the data, or use a backup. I could be wrong.

here is answer @Antho27mellilium

JBizzle3rd said:
y2jb is amazing, one of the best, fastest, easiest exploits ive ever used. loving it on 9.6

Post automatically merged: Nov 15, 2025

i dont really know what to recommned. Everyone would say to stay low. i go high i went to 9.6. waiting for 10x compatibility. I go to the highest possible. Y2JB is so good and right on the home page of the PS5, takes seconds to JB. I personally dont need a hypervisor exploit or anything more.

"I personally dont need a hypervisor exploit or anything more."

I'm glad to hear "dont need a hypervisor exploit or anything more"

I'm glad you don't need all possible PS4 + PS5 games (even the newest ones) functional on JB and you're happy with the minimum that's there now.

I'm glad you don't need backports of the newest games on the day of release on FW with HV ...

I'm glad you don't even need CFW

Just be modest, that's how it should be

Deleted member 767645 · Nov 15, 2025

I hope that in a few weeks there won't be just a new etahen/kstuff, which is now in beta states

yonasz · Nov 15, 2025

How I can switch of this CPU ram etc info in etahen 2.4b?
Btw ytjb it's really fast with autoloader setup tested Fw 5.10

wmc2000 · Nov 15, 2025

TrueFuture said:
I hope that in a few weeks there won't be just a new etahen/kstuff, which is now in beta states

there is a 2.4b etahen in tests i got but prob for the 9+ fixes only

Adam512 · Nov 15, 2025

yonasz said:
How I can switch of this CPU ram etc info in etahen 2.4b?
Btw ytjb it's really fast with autoloader setup tested Fw 5.10

thanks for info... what autoloader version you use?

wmc2000 · Nov 15, 2025

yonasz said:
How I can switch of this CPU ram etc info in etahen 2.4b?
Btw ytjb it's really fast with autoloader setup tested Fw 5.10

i had it also just go into etahen toolbox,,, settings,,,, game overlay menu and shut all off

yonasz · Nov 15, 2025

Adam512 said:
thanks for info... what autoloader version you use?

I'm using this one with etahen setup just one click jb :
https://github.com/itsPLK/ps5_y2jb_autoloader

Antho27mellilium · Nov 15, 2025

Adam512 said:
Most people update to 9.60, but it probably doesn't bring anything extra compared to 9.00... I recommend staying as low as possible, but if you insist on updating then go for 9.00 and then at the end of the year you'll see what PS5 stuff the developers have prepared for us.. you'll decide accordingly. BTW: there's some flow vulnerability on the wiki that's only possible up to 9.40(maybe), so it could theoretically happen that it's already fixed in 9.60.

here is answer @Antho27mellilium

"I personally dont need a hypervisor exploit or anything more."

I'm glad to hear "dont need a hypervisor exploit or anything more"

I'm glad you don't need all possible PS4 + PS5 games (even the newest ones) functional on JB and you're happy with the minimum that's there now.

I'm glad you don't need backports of the newest games on the day of release on FW with HV ...

I'm glad you don't even need CFW

Just be modest, that's how it should be

wow

Rasa39 · Nov 15, 2025

wait can PS5 Arcade Spirits be exploited? You'd have to use a console backup after exploiting with some other method to get the modded save installed right? Or does the ps5 version load ps4 saves?

carkys · Nov 15, 2025

Rasa39 said:
wait can PS5 Arcade Spirits be exploited? You'd have to use a console backup after exploiting with some other method to get the modded save installed right? Or does the ps5 version load ps4 saves?

yes, Arcade Spirits for PS5 can be exploited

PS5 Hack Status:

Preparing Your Console:

Select Your Jailbreak:

Additional Information:

Warnings:

Archived Information

The Treasure Tracker

Well-Known Member

Well-Known Member

​

Attachments

Member

Well-Known Member

​

Well-Known Member

Well-Known Member

The destroyer of worlds

Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Pervert Deluxe

Well-Known Member

Similar threads

Popular threads in this forum