I have been working on a small project for a little while attempting to get my slot 2 storage MMD with a CF card to work as extended storage room. (an R4 in slot1 is the main device) So far i have not had luck simply browsing to the second slot (moonshell does not support this i guess) but i have had success following other guides on this site to get moonshell to boot from the slot 2 install when booting the .nds from the slot 1. (the tutoril explained how to patch with the slot2 DLDI and use the no-autopatch program.)
This works very well, but only the first time. (?) Moonshell works perfectly when booted this way, but when i shut off my ds and do the exact same thing again, something has changed and it will not start. I tediously typed the error(s):
Old driver: Default (no interface)
New Driver: Max Media Dock (compact flash)
Position in file: 0x00024228
Position in memory: 0x02049020
Patch Base Address: 0x02004A40
Relocation offset: 0x00044600
Patched successfully
FAT_FreeFiles
ARM7Wait: Copy EWRAM to ARM7InternalMamory. and, Reset memory.
REBOOT
resetmemory1_ARM9
DTCM top=0x02800000,size=0x0450(1104)byte
HTCM top=0x02800500,size=0x2660(9824)byte
stack top=0x02802b60,size=0x13a0(5024)byte
Appname moonshell ver 2.10 stable
ARM RVCT3.1 [build 794]
___current pc=0x020008c8 sp=0x02803ec0
freemem=3469312byte
est for NULL ptr [NULLSTR]
expand memMgr array. [temp] 0->32
PC6=0x027ff400 296byte.
DSTT SDHCFlaq 0x00000000.
-----------------------------------------------------------------------
on the bottom screen is a generic message something that says "autodldipatch.exe" surrounded by japanease
and below that:
"was rom file of correct DLDI patch started?"
"Please re-format media and try again."
"Please try with different media from another manufacturer."
-------------------------------------------------------------------------------------
I have tried reformatting the slot2 CF again and installing moonshell 2.10 on it, but the same thing happens, works fine the first time, then the same thing.
Any ideas?
This works very well, but only the first time. (?) Moonshell works perfectly when booted this way, but when i shut off my ds and do the exact same thing again, something has changed and it will not start. I tediously typed the error(s):
Old driver: Default (no interface)
New Driver: Max Media Dock (compact flash)
Position in file: 0x00024228
Position in memory: 0x02049020
Patch Base Address: 0x02004A40
Relocation offset: 0x00044600
Patched successfully
FAT_FreeFiles
ARM7Wait: Copy EWRAM to ARM7InternalMamory. and, Reset memory.
REBOOT
resetmemory1_ARM9
DTCM top=0x02800000,size=0x0450(1104)byte
HTCM top=0x02800500,size=0x2660(9824)byte
stack top=0x02802b60,size=0x13a0(5024)byte
Appname moonshell ver 2.10 stable
ARM RVCT3.1 [build 794]
___current pc=0x020008c8 sp=0x02803ec0
freemem=3469312byte
est for NULL ptr [NULLSTR]
expand memMgr array. [temp] 0->32
PC6=0x027ff400 296byte.
DSTT SDHCFlaq 0x00000000.
-----------------------------------------------------------------------
on the bottom screen is a generic message something that says "autodldipatch.exe" surrounded by japanease
and below that:
"was rom file of correct DLDI patch started?"
"Please re-format media and try again."
"Please try with different media from another manufacturer."
-------------------------------------------------------------------------------------
I have tried reformatting the slot2 CF again and installing moonshell 2.10 on it, but the same thing happens, works fine the first time, then the same thing.
Any ideas?
