Homebrew postLoader4

[stfour]

It still downloads b32 from b33 link

Corrected ! Thank you !

@DaFees, I need to know cIOSX version and if your nand works with mighty channels or triiforce.

 

[G0dLiKe]

It still downloads b32 from b33 link

Corrected ! Thank you !

@DaFees, I need to know cIOSX version and if your nand works with mighty channels or triiforce.

Thx for fixing the link

 

[GartimusPrime]

Alright I feel stupid...I installed plneek on my real nand and when I load postloader a screen comes up asking if I want switch to uneek so i say yes.....then it transfers all the folders and everything and the wii reboots then all I get is a black screen....do I need to have postloader installed on the other nand? and also do I still need the bootmii folder for switching uneek....i guess what I am asking is what is the set up that I need to make this work?

 

[stfour]

@GartimusPrime

First, you should have a working uneek(+di) installation. This require a bootmii folder on sd, a sneek folder on sd, an emulated dump on the root of usb device with another sneek folder.

If the above works, we can continue...

1) Postloader switching system make sense only if you have more than 1 nand.
2) plneek.dol must be also in the root of sd.
3) priibooter.dol from last package should be installed in priiloader
4) copy in usb://nands your nands dump, one for folder
4) assuming you have a nand dump on the root of usb dev, create inside usb://nands an empty folder with the name you prefer. This will be used to backup your current nand when you switch nands

 

[JoostinOnline]

Here is ProgressiveSwitch v1.1.

ProgressiveSwitch

Changes from v1.0:

• Almost 50% of the size.
• Hopefully this will fix the freezing issue when run from an emulated NAND.
• Faster
• No longer prompts to continue before exiting.
• Tiny code cleanup

 

[stfour]

Here is ProgressiveSwitch v1.1.

ProgressiveSwitch

Changes from v1.0:

• Almost 50% of the size.
• Hopefully this will fix the freezing issue when run from an emulated NAND.
• Faster
• No longer prompts to continue before exiting.
• Tiny code cleanup

Thank you joostin... have you seen my pm ?

 

[JoostinOnline]

Thank you joostin... have you seen my pm ?

Yes, and I responded to it several hours ago, lol.

 

[stfour]

Thank you joostin... have you seen my pm ?

Yes, and I responded to it several hours ago, lol.

Oopss, sorry, I've missed it

 

[JoostinOnline]

Thank you joostin... have you seen my pm ?

Yes, and I responded to it several hours ago, lol.

Oopss, sorry, I've missed it

I'll forgive you...in time.

 

[kylster]

Here is ProgressiveSwitch v1.1.

ProgressiveSwitch

Changes from v1.0:

• Almost 50% of the size.
• Hopefully this will fix the freezing issue when run from an emulated NAND.
• Faster
• No longer prompts to continue before exiting.
• Tiny code cleanup

Is this only useful for emulated nands run outside or by PostLoader?

 

[JoostinOnline]

Is this only useful for emulated nands run outside or by PostLoader?

Well you can run it from both emulated and real NAND, if that's what you mean. I don't know if I fixed the freeze issue on emulated NANDs because I don't have one, but I think I found the problem.

 

[Bauldrick]

stfour

Can I get a version older than 31?

I used to be able to use emulated nand feature, but now whenever I select my emunand postloader kicks me into HBC. Then whenever I stop autoboot (press (A) to interact) it kicks me into HBC again, until I remove ploader.cfg.

It's probably me ofcourse

- but I have it on 2 different nands and since 31 and up (i think) using d2x v7, 4.3E , starting from priiloader

-EDIT-

scrub that, I deleted the entire ploader directory and it seems to be fixed, maybe it was the theme I was using? dunno, anyway it's working

 

[kylster]

Is this only useful for emulated nands run outside or by PostLoader?

Well you can run it from both emulated and real NAND, if that's what you mean. I don't know if I fixed the freeze issue on emulated NANDs because I don't have one, but I think I found the problem.

OK I didn't know that was an issue with (emu)nand; thanks for informing me

 

[JoostinOnline]

Is this only useful for emulated nands run outside or by PostLoader?

Well you can run it from both emulated and real NAND, if that's what you mean. I don't know if I fixed the freeze issue on emulated NANDs because I don't have one, but I think I found the problem.

OK I didn't know that was an issue with (emu)nand; thanks for informing me

Would you mind testing it? Just run the latest version and see if it freezes on exit.

 

[stfour]

stfour

Can I get a version older than 31?

I used to be able to use emulated nand feature, but now whenever I select my emunand postloader kicks me into HBC. Then whenever I stop autoboot (press (A) to interact) it kicks me into HBC again, until I remove ploader.cfg.

It's probably me ofcourse

- but I have it on 2 different nands and since 31 and up (i think) using d2x v7, 4.3E , starting from priiloader

-EDIT-

scrub that, I deleted the entire ploader directory and it seems to be fixed, maybe it was the theme I was using? dunno, anyway it's working

Bauldrick, do you remember the theme ?

Actually dimension theme make postloader crash... I need find why.

 

[Bauldrick]

It was the orange theme, but it wasn't that I think, I actually renamed the directory and just copied back postloader.png directory and it does the same behaviour - a bad cover? I just had this sort of thing in wiiflow, not loading emunand until I removed covers.... how odd

 

[stfour]

It was the orange theme, but it wasn't that I think, I actually renamed the directory and just copied back postloader.png directory and it does the same behaviour - a bad cover? I just had this sort of thing in wiiflow, not loading emunand until I removed covers.... how odd

It can be.... what make me thinking is that it return to hbc...

Please, make a test... rename .png folder... run postloader, change channel page, run one of you channel. Rename back png folder. If is a png problem it should'n crash until you return in previous page.

 

[kylster]

Is this only useful for emulated nands run outside or by PostLoader?

Well you can run it from both emulated and real NAND, if that's what you mean. I don't know if I fixed the freeze issue on emulated NANDs because I don't have one, but I think I found the problem.

OK I didn't know that was an issue with (emu)nand; thanks for informing me

Would you mind testing it? Just run the latest version and see if it freezes on exit.

I can't atm cause the wife if watching NCIS S09E01 LoL but I can tonight I do not believe I close so I should be home around 11pm EST so you can expect an response around that time.

Do you want me to test from Uneek+di or from Postloader?

 

[JoostinOnline]

Is this only useful for emulated nands run outside or by PostLoader?

Well you can run it from both emulated and real NAND, if that's what you mean. I don't know if I fixed the freeze issue on emulated NANDs because I don't have one, but I think I found the problem.

OK I didn't know that was an issue with (emu)nand; thanks for informing me

Would you mind testing it? Just run the latest version and see if it freezes on exit.

I can't atm cause the wife if watching NCIS S09E01 LoL but I can tonight I do not believe I close so I should be home around 11pm EST so you can expect an response around that time.

Do you want me to test from Uneek+di or from Postloader?

Wever reported it freezing when using the HBC on UNEEK+DI. Thanks a lot.

 

[stfour]

It was the orange theme, but it wasn't that I think, I actually renamed the directory and just copied back postloader.png directory and it does the same behaviour - a bad cover? I just had this sort of thing in wiiflow, not loading emunand until I removed covers.... how odd

It can be.... what make me thinking is that it return to hbc...

Please, make a test... rename .png folder... run postloader, change channel page, run one of you channel. Rename back png folder. If is a png problem it should'n crash until you return in previous page.

Forgot that... I will prepare a debug version that log on sd.... few hours...