Hacking Post your WiiU cheat codes here!

  • Thread starter Thread starter LawnMeower
  • Start date Start date
  • Views Views 2,112,082
  • Replies Replies 9,274
  • Likes Likes 52
Ok, that sounds good. Would you mind walking me through it?
1) Start a 100 mario challenge.
2) In JGecko U, go into the search tab. For the search type, make it specific value, 8-bit, and equal. In the box, type the hexadecimal of the value of your lives. So, to start, type 64 in the box, because that is hexadecimal for 100, then press the search button.
3) Lose a life and search for 63 because it is 99 in hexadecimal.
4) Repeat this process until there is 1 result. Then keep going again to make sure you were searching in the right range.

Once you've got the address, tell me it, and I will tell you how it is put into a code.
 
1) Start a 100 mario challenge.
2) In JGecko U, go into the search tab. For the search type, make it specific value, 8-bit, and equal. In the box, type the hexadecimal of the value of your lives. So, to start, type 64 in the box, because that is hexadecimal for 100, then press the search button.
3) Lose a life and search for 63 because it is 99 in hexadecimal.
4) Repeat this process until there is 1 result. Then keep going again to make sure you were searching in the right range.

Once you've got the address, tell me it, and I will tell you how it is put into a code.
Dumb question, but the aligned box has to be checked right?
 
So I did it, but nothing popped up. I only typed in 64 so far though and I did pause it toward the end because I was running out of time.

Is nothing supposed to pop up the first go? Should I do it again without pausing?
 
So I did it, but nothing popped up. I only typed in 64 so far though and I did pause it toward the end because I was running out of time.

Is nothing supposed to pop up the first go? Should I do it again without pausing?
When there are too many results, none are written out because it would be pointless and slow. It does not matter if you were paused or not.
 
  • Like
Reactions: RedRose30
When there are too many results, none are written out because it would be pointless and slow. It does not matter if you were paused or not.
Ok. I will do it again right now at 99 lives.

--------------------- MERGED ---------------------------

So I did and and got 4 results. So do I type in 62 now at 98 lives?
 
It indeed stays unchanged there lol
BTW, made a new funny code:
Normal Mario Pitch Modifier
30000000 3C473F8C
3C000000 3D000000
31000000 FFE511FC
00120000 ????????
D0000000 DEADCAFE

3E000000 = bawling
3E800000 = Satanic
3F000000 = Deeper
3F800000 = Default
40000000 = High
40400000 = Chipmunk
40800000 = Helium Chipmunk
41000000 = Mouse

Is it possible to make the Super Leaf give you only the Raccoon ears and tail instead of the whole suit? I would kill for a mod like that!
It indeed stays unchanged there lol
BTW, made a new funny code:
Normal Mario Pitch Modifier
30000000 3C473F8C
3C000000 3D000000
31000000 FFE511FC
00120000 ????????
D0000000 DEADCAFE

3E000000 = bawling
3E800000 = Satanic
3F000000 = Deeper
3F800000 = Default
40000000 = High
40400000 = Chipmunk
40800000 = Helium Chipmunk
41000000 = Mouse
 
Help, my wiiu showed up and I can now connect my wiiu to my PC and jgecko. Might seem like a daft question this but how do you get the codes to work? If I select "send codes" it says codes sent but there's no difference in the game. If I click add codes, a window pops up which is red. I copy and paste the codes, (in this case its The Legend Of Zelda, The Windwaker HD), the "OK" button is greyed out. Any help and advice on with this will be much appreciated.Help








Sent from my XT1562 using Tapatalk
 
Help, my wiiu showed up and I can now connect my wiiu to my PC and jgecko. Might seem like a daft question this but how do you get the codes to work? If I select "send codes" it says codes sent but there's no difference in the game. If I click add codes, a window pops up which is red. I copy and paste the codes, (in this case its The Legend Of Zelda, The Windwaker HD), the "OK" button is greyed out. Any help and advice on with this will be much appreciated.Help

Behind the first line of code there is a unwanted space you have to get rid of (sometimes)

Wind Waker hd PAL
inf health
00000000 150735C3[Space]
00000050 00000000

then you should be able to click ok
And next time try using the jGekoU thread to look for help regarding it's programm
If you have trouble with a specific code this would be right thread ... but the smart people here (not me) would still need more details
 
  • Like
Reactions: TudorBlue
Behind the first line of code there is a unwanted space you have to get rid of (sometimes)

Wind Waker hd PAL
inf health
00000000 150735C3[Space]
00000050 00000000

then you should be able to click ok
And next time try using the jGekoU thread to look for help regarding it's programm
If you have trouble with a specific code this would be right thread ... but the smart people here (not me) would still need more details
OK ,thanks


Sent from my XT1562 using Tapatalk
 
Is it possible to make the Super Leaf give you only the Raccoon ears and tail instead of the whole suit? I would kill for a mod like that!
that'd be possible IF the ears, tail and body suit part are individual (sub)objects. But idk if that's the case
 
Heya, I just fixed the Map Select thing in Wind Waker HD.
I'm working on the update for JGecko U now (so with codehandler) and will create a second tool for it for better map loadings without crash!
It will force the game to reload the map. :)

Edit: Does anybody know why the Wii U crashes when connecting with JGecko U?
I click on connect, then my wii u makes beeeeeeeeeeeeeeeeep and I'll get connection error

Edit2: I'm using latest codehandler and tcpgecko.elf

Edit3: fixed
 
Last edited by Dekirai,
  • Like
Reactions: LawnMeower
Can somebody test my Wind Waker Map Loader?
I reworked the "Test Rooms" from my current Trainer, it will instantly teleport you to the Room, instead of entering a door first. (Crash safe)

TIRacab.png
 

Attachments

Wind Waker HD (Universal Codes)

Reload current Stage
109763FC 00000001

Force the Storage Glitch
10976542 00000000
Use the Windwaker and then poke the value 0

Reset the Game
1098F293 00000001
Kicks you back to the title screen

Stage Name
109763F0
109763F4

Room ID
109763FA

Spawn ID
109763F9

Layer of Map
109763FB
 
Last edited by Dekirai,
Wind Waker HD (Universal Codes)

Reload current Stage
109763FC 00000001

Force the Storage Glitch
10976542 00000000
Use the Windwaker and then poke the value 0

Reset the Game
1098F293 00000001
Kicks you back to the title screen

Stage Name
109763F0
109763F4

Room ID
109763FA

Spawn ID
109763F9

Layer of Map
109763FB
Did you figure out how to load levels without freezing the game? This sometimes happened to me about a year ago so I couldn't play all test levels :/
 
Did you figure out how to load levels without freezing the game? This sometimes happened to me about a year ago so I couldn't play all test levels :/
With the method I used in my map loader, every map should work, but anyway; I tried some maps which didnt worked in the past with the old method, they still crash.
Seems like that some Maps exist, but can't be loaded.
 
With the method I used in my map loader, every map should work, but anyway; I tried some maps which didnt worked in the past with the old method, they still crash.
Seems like that some Maps exist, but can't be loaded.
I think the problem is that we have to change something before the level name. this is what the stage loader of the GCN version does and it never crashed for me
 

Site & Scene News

Popular threads in this forum